Aramox Electric Car, Type 2 Wallbox EV Car 32A Electric Vehicle Charging Station 22KW IEC 62196‑2 Connector with LED Indicator

Features

• EV Fast : This electric car has an output of 415V and an input frequency of 50/60Hz. It usually takes about 4 to 5 hours to fully charge an electric car. The charging plug is suitable for Type 2 vehicles and equipped with a card control switch to effectively prevent from charging stealing.
• Safe: All our products are CE and TUV certified. Equipped with intelligent temperature control chip, to avoid the danger of excessive temperature. If the temperature exceeds normal, the output current is lowered or charging is stopped to prevent overheating.
• Protection: Under voltage protection, overload protection, short circuit protection, ground circuit protection, grounding protection, over temperature protection, low temperature protection, lightning protection.
• Note: When installing for the first time, be sure to ensure that the power cord takes IN to L (fire wire), IN to N (zero line), PE (ground wire) one after another, and the fire line and the zero line cannot be reversed. PE (Earth Wire) must be reliably grounded. Make sure the emergency stop button is activated after powerup. Before charging, ensure that there is no stain or water stain on the end of the charging head; It is forbidden to place the charging station in the car during charging.
• Multiple Protection: Under voltage protection, overload protection, short circuit protection, ground circuit protection, grounding protection, over temperature protection, low temperature protection, lightning protection.

Description

Spec: Item Type: EV Charging Wall Unit Material : ABS TPU Copper Silver Adjustable Current: 32A (8/10/13/16/32A) Voltage: 415V Power: 22KW Frequency: 50/60Hz RCD (Optional): TypeA RCD User Interface: LED indicator, LCD display (approx. 2.8 inch/7.1cm), card swiping Charging Head Standard: IEC 62196-2 Certification: CE,TUV Charging Interface: Type2 Cable Length: Approx. 5m/196.9in Charging Plug Waterproof Rate: IP55 Charging Station Waterproof Rate: IP65 Operating Temperature: -30℃ to 55℃ Operating Humidity: 5%-95% Features: over voltage protection, under voltage protection, overload protection, leakage protection, ground protection, over temperature protection, lightning protection, short circuit protection How to Use: 1. Locate the hole according to the size of the wall mounted backplate, and then punch the six holes of approximate φ5mm/0.2in and insert the expansion tube.2. Lock the 6 M4 self tapping screw in the expansion tube and attach the wall mounted backplane to the wall.3. Hang the stack on the wall mounted backplane and lock the screws from the bottom of the stack.4. Pass the power cord through the appropriate waterproof head and connect to the appropriate input port. PackageList: 1 x Type2 Wall Box Electric Vehicle Charging Station 1 x Charging Tip Wall Hook 3 x Wall Hook Fixing Screw 8 x Expansion Tube Bolts 2 x Charging Station Hook Bracket 7 x Buckle Bracket Fixing Screw 3 x RFID Card 1 x Instruction Manual Notice: 1. When installing for the first time, be sure to ensure that the power cord takes IN to L (fire wire), IN to N (zero line), PE (ground wire) one after another, and the fire line and the zero line cannot be reversed. 2.PE (Earth Wire) must be reliably grounded. Make sure the emergency stop button is activated after power‑up. 3. Before charging, ensure that there is no stain or water stain on

Brand: Aramox

Specification Met: TUV, IEC

Input Voltage: 415 Volts

Charging Time: 5 Hours

Current Rating: 32 Amps

Manufacturer: ‎Aramox

Brand: ‎Aramox

Model: ‎Aramoxrx7dmbantz

Package Dimensions: ‎18.11 x 18.11 x 6.3 inches

Country of Origin: ‎China

Item model number: ‎Aramoxrx7dmbantz

Manufacturer Part Number: ‎Aramoxrx7dmbantz

Date First Available: April 28, 2023