EV Charger BLACKBOX 240V 60-100A Service – No Electrical Panel or Service Upgrade Required. Allows 240 Volt up to 48 Amp (60Amp) EV Fast Charge Rate EV Load Management System Save $$

What is an EVEMS? Black Box Innovations Energy Management System (EMS) enables electric devices like Electric Vehicles (EVs) to fast charge when there is sufficient electrical capacity available and automatically stops charging when capacity is limited. Energy Management systems can be referred to as EVEMS, (Electric Vehicle Energy Management Systems) EMS (Energy Management Systems, or ALMS (Automatic Load Management System). Electrical Service Load Calculator Installing our Energy Management Devices will allow an electrician to exclude the Electric Vehicle charging portion and possibly other device loads from the residential electrical load calculation found in your US and Canadian codebook. Our products are designed for electrical service sizes of 60A-100A, 125A, 150A & 200A and accommodate the most common EV charge rates up to using a 60A breaker. Fail-Safe is an important consideration when selecting energy management systems as many devices use latching relays that can leave the controlled device in a "powered state" indefinitely if the controller fails. This presents a serious safety concern. In contrast, our energy managers use a contactor that will fail in a powered-off state and thus prevents this issue. Compact size allows our EVEMS to fit in tight spaces above or around an electrical panel. No extra breakers are needed and many usable standard knockouts to choose from. Our current monitoring devices are small and clip onto the main lines without disconnection making for a quicker and easier installation. Never have a customer suffer from range anxiety when you can offer high-speed charging in their home with no additional cost for service upgrades. No wasting time compiling electrical specifications for load calculations that end in an unacceptable charge rate or loss of the job.Using our devices makes installations fast and easy. Save time and money. Close more jobs. Our products are each individually inspected and labeled by Intertek at our manufacturing facility in Canada. This means that each one of our devices are inspected for build quality and safety by a third party. This is an extra step that you do not get from most manufacturers. It provides for an exceptionally low failure rate and gives us the flexibility to respond to feedback from our customers and to keep up with this ever-evolving field. We have provided reference links below to the major regional safety authority websites where this labeling is listed as approved for use in each respective jurisdiction. This type of labeling ensures a safe, quality product, which will allow for seamless electrical inspections in both the US and Canada. Some have inquired about a small "C" beside the Intertek symbol to indicate that it is valid in the Canadian market. Installing our Energy Management Devices will allow an electrician to exclude the Electric Vehicle charging portion and possibly other device loads from the residential electrical load calculation found in your US and Canadian codebook. NEC 220.70 Energy Management Systems (EMSs) "If an energy management system (EMS) is used to limit the current to a feeder or service in accordance with 750.30, a single value equal to the maximum ampere setpoint of the EMS shall be permitted to be used in load calculations for the feeder or service." NEC - National Electrical Code 2023 Other Applicable Codes: NEC articles 625, 750