Checking for product changes
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Brand: Ultimaker
Material: Pla
Color: Multicolored
Product Dimensions: 1.18"D x 1.3"W x 0.94"H
Compatible Devices: Personal Computer
Product Dimensions: 1.3 x 1.18 x 0.94 inches
Is Discontinued By Manufacturer: No
Date First Available: October 20, 2016
Manufacturer: Ultimaker BV
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
In the beginning it was tough but eventually I started getting really awesome prints with pla, nylon and abs. All the materials I use are cheaper 3rd party brands And still come out great. Sometimes depending on the part and material I have to change some setting in the slicer but all in all this is a pretty sweet machine. This is the first printer I have ever used and so far its been good to me.
...
show more
Reviewed in the United States on December 3, 2020 by Mangoman
We bought a few of these for our offices and thought the clean look and nice tech would really wow our clients. I had hoped that the printer would be a step above my Prusa I3MK3 in both print quality and reliability but this isn't the case. The prints we've been able to achieve are okay but they leave a lot to be desired in surface finish. The preset options just aren't very dialed in even when using manufacturers filament. Bowden tube issues especially with the support filament is a regular problem and we had the air handler fan go down for no apparent reason. And then just this week the Main board failed on a firmware update. This is where the story takes a nose dive. The Ultimaker S5 has the ability to automatically cue updates via wifi. And That is cool tech, but this time when it prompted the latest 7.0.3 update and we said okay, the printer was never to be the same. The build installed fine at first. Then the it sat on the thinking about it screen for two hours. Finally we knew we had to abort this so we did a hard reboot. And reinstalled the firmware again to make sure it worked. This time the printer came up fine so I cued a job and then it error coded #33. X, Y axis failure or limit switches disabled. So we tried to follow the troubleshooting protocol from the screen and no luck. Next we contact support and wait. Then a reply to ask us to do what we already did. So another email back and forth and we wait for them. The next day finally a reply and we're told to swap the feeder cable for the y cable and then to move material. But how is that done? It's not noted or listed anywhere. so we wait another day. Then we get the instructions and find the y motor does drive and send the email, and then we wait. And then the following day we are told that the main board has failed and we need to buy another one. So we complain that this happened during a firmware build update and then we wait. And the next day they reply that's not possible it hasn't ever happened before. And that's it. So then I insist it was printing the day before with no known issues, finished the print succefully and then we install the build and it fails the motor board. And we wait, and then get the same "I've never seen that it's not your responsibility it needs a new board". $10K printer with a failed board after 2 years, with only 57 days hot and the printer main board fails? Just received the quote for the new board. Over $1000.00! How's that for a smack in the face? I might just have to buy another Prusa.
...
show more
Reviewed in the United States on May 6, 2022 by Matthew Kolze
Extremely disappointed. It smashes the first layer of every print into the bed and there's no way to change this. The recommendation from Ultimaker was to use a raft. This is not acceptable to me (or what we are printing) and contrary to my experience and expectations. My company purchased this unit to produce small batches of components. We were expecting a more professional experience with multiple extruders. We ended up with lower quality prints than a $600 Qidi--even beyond the first layer the quality is not good. We have tried different slicers, settings, and we use high quality filament that is kept in a dryer. If you've ever used a Type-A Machine, we expected something at that level or better with dual extruders --Not even close. I've used/owned many 3d printers for several years now and am no stranger to adjusting hardware and firmware even out of the box. The most important thing is being able to make adjustments when necessary. This machine makes that impossible. I wouldn't recommend it at at any price since it just doesn't have the features one expects of any 3d printer. It is incredibly slow to start (add 5 minutes after warm up) - doing a lengthy bed calibration routine every time. Then it promptly smashes the first layer of your print into the print bed (but very evenly smashed). If you decide to take a chance, I recommend to buy through Amazon so you can return it without drama. Ultimaker/Matter Hackers keep insisting it works as designed and won't return it. There's definitely a gap in this area of the market, but the S5 doesn't fill it.
...
show more
Reviewed in the United States on December 3, 2018 by Luke