MistKing – Starter Misting System, 5th Gen | Used by Zoos, Botanical Gardens, Institutions & Hobbyists | Expandable to 10 Nozzles | Extremely Fine Mist | 50 Micron Droplets | MKSMS5-125-50

Starter misting system comes with a default ST-24 timer, but can be controlled by either a repeat cycle timer or the hygrostat. This is the latest 5th generation Ultimate Misting System. Created based on most often ordered parts and feedback from our customers coupled with our constant thirst to do better. Each version sold before had some major improvements that made it better than the previous. This time we tackled the improvement of the timers and addition of few crucial parts. In previous version we have created 3 completely custom timers suitable for various applications. Our misting systems have been applied in a multitude of applications, from patio cooling, reptile, amphibian terrarium/vivarium enclosures, growing shelves with orchids or exotic plants, hobby greenhouses, and even grocery and industrial applications. Timers now have a 3 times higher electronics rating which better equips the timers for dealing with power outages and high inductive demand of MistKing pumps. This should improve system failure rates and add to MistKing reliability. Our Reservoir Bulkhead has been custom designed from ground up and is exclusive to MistKing. With its dense metal thread you can now tighten with all required force without worry of stripping. We have even tested the bulkheads to squeeze a bucket without an o-ring and achieved perfect seal. Nevertheless use an o-ring for added security. This is the starter pump. You can use this pump with one nozzle or with 10 nozzles. It can run continuously for hours at a time EVEN DRY! This self priming pump is capable of producing maximum of 125 PSI of pressure. This pump is virtually silent. When operating, You'll be wondering if the pump is even on. Pump comes with a 1.2Amp 24V AC/DC adapter. Even though this pump is self priming on its own, it should be gravity fed to bypass the blocking pressure of the nozzle checkvalves. Equipped with 1/4" push in fittings on both sides of the pump, a pump mounting bracket. ZipDrip is optional feature on this pump. Typically when misting is done the pressure left in the lines will cause your nozzles to drip. The Integrated Zip drip valve will reduce your dripping down to ZIP ! This pump is powered by a 24V Power adapter. Select your appropriate voltage when purchasing. See details for more information. 5th gen timer has improved electronics and is more resistant to power outages due to storms and demand of larger pumps. 4th gen timer works great with starter v4 misting systems due to smaller pump. NOTE: MistKing delivers perfect mist, every time to every nozzle with precise pump control. Other misting systems often use low quality nozzles with varying flow rates, angle and droplet sizes from poorly made nozzle tips giving you with terrible performance. Do your research, get what best and most prestigious hobbyists and institutions get around the world.