5-Channel Amp for Speakers and Sub Class-D 1600W Peak Harmony Audio | Full-range car amplifier power with dedicated subwoofer output, alloy build quality, compact chassis

Features

• 1600W PEAK POWER: With an impressive 1600 watts of power, this amplifier offers the strength needed to fully energize your subwoofer. Its high power output guarantees a deep and immersive bass experience that resonates throughout your vehicle.
• FULL RANGE PERFORMANCE: The amplifier is designed to deliver full-range performance, providing crisp and detailed sound reproduction for both high and low frequencies. This ensures that every instrument and vocal in your music is reproduced accurately, allowing you to enjoy a lifelike listening experience inside your vehicle.
• INTELLIGENT AMPLIFIER REGULATION: Address the issue of locating a switched 12-volt wire with Harmony Alloy Amplifiers. Utilize DC voltage offset or the conventional 12-volt switched remote turn-on lead to regulate the amplifier, ensuring versatility and user-friendly control.
• INNOVATIVE DAISY CHAIN FEATURE:Lead the way with the pioneering daisy chain attribute, allowing for the connection of a second Harmony amplifier or accessory. By utilizing the empty remote terminal as a 12-volt switched output, it introduces opportunities for managing extra devices with low amperage triggers, enhancing the depth of your musical enjoyment.
• BASS REMOTE INCLUDED: The amplifier comes complete with a dedicated bass remote, putting control over your bass levels directly into your hands. This feature allows you to fine-tune the audio output on the fly, adapting it to your musical preferences and specific genres.

Description

Harmony Audio introduces our Alloy series amplifiers available in Class D including (3) Mono Block, (1) Four Channel and (1) Five Channel models to choose from. The Alloy series amplifiers feature some technology and features that you will not find anywhere else including options right out of the box to connect to a factory or aftermarket radio source. The included HA-EASY adapter allows you to easily splice into factory wiring to acquire the audio input signal. Another common problem with using a factory stereo is finding a switched 12 volt wire to turn the amplifier on and off. Our Alloy Amplifiers feature a solution where the amplifier can be controlled via DC voltage offset or the traditional 12 volt switched remote turn on lead. Our Alloy amplifiers are also designed for maximum power output! All of the mono block class D amps are 1 Ohm Stable and feature similar power output at a 2 Ohms. This gives you tons of flexibility for woofer options and wiring configurations. The Class D circuitry also keeps the amp running cool with maximum power efficiency. All single and 5 channel models also include a bass remote to allow you to dial in the bass from the comfort of the driver’s seat! All Harmony Alloy amplifiers include HA-EASY adapter(s). If installing an aftermarket radio source that has RCA output then the HA-EASY is not going to be needed for your installation. If you are connecting to a factory audio source this adapter is going to make for a much easier installation. The adapter has two purposes: It’s possible to generally find your factory speaker wires in a kick panel, in a wire pack under threshold trim or even at the speaker location itself. The factory radio does not need to be removed saving a ton of installation time and saving money on costly adapters. The included Bass Remote allows you to easily manage the power output of your amplifier from the comfort of the drivers seat. The remote bass knob is designed to mount near the driver for quick and easy fine tuning based on music type or for passengers who might not share your love of loud, kicking bass! This is especially handy if you listen to a wide variety of music as bass frequencies can widely vary from musical styles. The remote bass controller features a 0 to 12 dB boost range. When we say 0 we mean ZERO. The remote can completely cut out all output on the amplifier which is handy for system setup or also maybe if grandma borrows your car for bingo night (unless she is down with bass then by all means leave it up!) The remote also features a blue LED status light so you can easily tell if your amplifier is on. The remote bass knob also includes all necessary mounting hardware to install it. Next up is a feature you will not find on any other brand or model of amplifiers and we are very proud of this! So let’s say you have a factory radio and you are running one of the Harmony amps using the included HA-EASY adapter but you also have a 2nd Harmony amp you also want to install or maybe even an amp of a different brand. When the Harmony amp is being controlled by the DC offset to turn it on and off the empty remote terminal now becomes a 12 volt switched output! This can be used to turn on and off the 2nd amplifier or any other 12 volt switched accessory! This output is only designed to turn the device on and off via a low amperage trigger and rated at 1 amp maximum. The sky is the limit of what this could be used for and can be anything you want to be turned on or off with your music. Length: 15-3/4" x Width: 6-1/4" x Height: 2-1/4"

Item dimensions L x W x H: 21.4 x 8.6 x 4.3 inches

Voltage: 12 volts

Manufacturer: Harmony Audio

Maximum Supply Voltage: 12 volts_of_direct_current

Minimum Supply Voltage: 12 volts_of_direct_current

Voltage: 12 volts

Maximum Supply Voltage: 12 volts_of_direct_current

Minimum Supply Voltage: 12 volts_of_direct_current

Mounting Type: Surface Mount

Number of Channels: 5

Output Power: 1600 watts

Package Type Name: box

Maximum Output Power: 1600 watts

Item Dimensions: 21.4 x 8.6 x 4.3 inches

Material Type: Alloy

Manufacturer: Harmony Audio

Model: HA-A800.5

Brand Name: Harmony Audio

Number of Items: 1

UPC: 021221684244

Part Number: HA-A800.5

Specification Met: Oem