Pile Driver Hammer, 2 Stroke 52CC Gas Powered T Post Driver Hammer Drills Engine Air Cooling Single Cylinder Gasoline Petrol Garden Fencing Tool Machine with 2 Post Driving Head

Safe to Use: The safety lock, visible oil pipelines, security tips on the body, and the one-click flameout switch all provide you with more protection, making you safer during operation. Large Semi-transparent Fuel Tank: A 0.26gal large capacity and semi-transparent fuel tank allows you to monitor fuel usage at any time, replenishes fuel promptly and makes your work more efficient. Quick&Firm Replacement: The socket with high hardness and thread design can be quickly replaced according to the size of the pile, and the deep thread can ensure firm fixation. Low Noise: As a heavy-duty machine, its noise during operation is only below 103 DBA, which allows you to pay attention to the changes in the working environment and keep track of surrounding movements during use. Piling work is usually carried out in relatively harsh environments,where traditional piling methods are very unsafe and inefficient. Fortunately,with this post driver,your piling work can be very simple! The 1900W,52cc two-stroke engine provides sufficient power to help you save time and energy,while the thoughtful shock absorption design and safety lock ensure your safety and comfort during use. In addition to a post driver, our package also prepares different sizes of post sockets, an oil-mixing kettle, a tools kit, and other components and parts that you may need in your work, providing you with more thoughtful services. This product comes in a custom foam that resists common compression and falls to prevent product damage in transit as much as possible. 1. If the pile driver has the problem of not hammering: 1. Whether too much butter is added at the place where the butter is added, clean up the excess oil in the cylinder before disassembling and re-add about 20g of high temperature resistant butter. 2. The speed of the carburetor can be slightly fine-tuned. If the impact frequency is too high, it can be lowered if the hand cannot hold it. Otherwise, the impact frequency should be increased. Note that it is fine-tuning. 2. The machine is not easy to start. First, check the ratio of oil: gasoline: oil = 25:1, be sure to use a good second-flush oil. The starter rope is pulled out an arm's distance, and it can be started by pulling it two or three times in a row, but it is also related to the temperature, and sometimes it needs to be pulled several times. When the cold engine starts, close the damper (for good start, the warm engine can be opened and start) and open the damper after the machine is normal. Comfortable, non-slip and shock absorption, effectively reducing fatigue during work. 1200ml large-capacity fuel tank, with gasoline 93 and 2-stroke special engine oil mixed in 25:1. When starting, pull the starter quickly and continuously, do not pause when pulling, and stop when it is almost full.