Patriot Products CSV-3090H 9 HP Honda GX Gas Powered Wood Chipper Leaf Shredder
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
Non-returnable item
Learn more
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Availability:
In Stock.
Arrives
Oct 6 – Oct 8
Recently Viewed
Features
- Easily shred mountains of leaves by sliding them into the large hopper on the top of the unit.
- Run branches up to 3 inches in diameter down the funnel shaped cone to create coin-sized chips.
- Processed material will be discharged up to 5 ft from the machine or into the std collection bag.
- Powered by the strong, quiet, and easy starting Honda GX engine.
- The large diameter wheels and convenient built-in handle make it easy to move and store.
Product Dimensions: 31.89 x 24.02 x 37.01 inches
Item Weight: 140 pounds
Manufacturer: Patriot Products
Item model number: CSV-3090H
Is Discontinued By Manufacturer: No
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Oct 6 – Oct 8
This item is non-returnable:
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
The Patriot 9 HP Honda Engine driven chipper is a great machine! It is however, not made to digest trees, but does well with small diameter branches up to about 2 or 2 1/2 inched in diameter. All kinds of yard waste, with diameters of 1/2" or less, can be loaded into the top of the machine where you avoid the two sharp knives and go directly to the swinging hammers. This is great for leaves. All branches of between 1/2 inch diameter and about 2 1/2 inch diameter can be fed into the cone shaped feeding device and will be chopped up by the two hardened steel knives, which can be removed for sharpening or replacement. Long branches, with leaves attached, can be loaded into the chipping cone and will be nicely chopped up into coin sized pieces. This machine will take some learning to best use its capabilities and not overburden the function by feeding branches that are too big to digest. A 3" branch will work if fed slowly so as not to overload the capability of this fine chipper. Having sharp knives helps considerably. The 9 HP Honda Engine is a quality engine and should last a long time. It starts easily, usually on the first or second pull, and is fairly quiet. However, both ear plugs and goggles are needed when using this machine. The Honda Engine has a fuel shut off valve and a carburetor drain, so if you use Sta-bil fuel stabilizer, you should be able to leave the gas in the tank for storage after draining the carb. This is a great and well made chipper, but it is a dangerous device if not used correctly. Don't forget to add oil before starting the engine for the first time.
...
show more
Reviewed in the United States on May 8, 2015 by Stephen S. Kahn
I have put more than 80 hours on this unit and, overall, I am very pleased. The way that it makes branches "go away" by turning them into chips is "magic". Here are my "Pros" and "Cons": PROS - The unit always starts with one pull. This is great for an older-timer like me. - Some have commented that the unit bogs down with larger branches. It does, but some decrease in RPM is expected as the feed speed increases or the branch diameter exceeds one inch. Although you can feed a three-inch branch through the unit, you really must be reasonable concerning performance expectations for a unit of this size. For its size, it works just fine. CONS - Blade hardness could be improved. It was not defined within the literature that I received; however, you really need to resharpen the blades after 4 hours of use. If you have to chip Manzanita, the blades dull more quickly, so plan to chip these at the end of the day so that the blades stay sharp and feed rates are maintained. If you have to push the branches into the unit, the blades need sharpening. I developed a fixture that I used to sharpen the blades using a one-inch vertical belt sander, and this maintains the correct cutting angle and lengthens blade life. - I experienced a failure with the Rotor Tri-Plate. The welds around the center shaft were poorly executed and eventually failed. I contact the manufacturer and was very displeased with his response and overall technical competency. Even after I sent him pictures revealing the poorly applied and incomplete weld, he still indicated that I must have been mistreating the unit and that the weld was not at fault. I ended up buying a new Tri-Plate for $335 and receiving two sets of replacement blades. As a side note, the new Tri-Plate exhibited complete and very robust welds, must more substantial than the unit I received. I expect that the manufacturer has either adjusted their welding techniques or increased their quality control. Regardless, the whole experience did not reflect the response I expected based on the overall quality of the chipper. - I have an engineering background and I like to tinker. When I installed the new Tri-Plate, I measured the runout near the edge of the Tri-Plate with a dial indicator. The variation was almost 1/8 of an inch. So, this plate, at high revolutions, was creating a lot of vibration due to the imbalance that this "wobble" produced. To improve this condition, I created a fixture where I could adjust the the surface positioning around the circumference of the Plate to reduce the runout. I was able to reduce the variation to about 0.015 of an inch. This adjustment reduced the overall vibration of the unit and actually improve feed rate and cutting performance because both blades were addressing the feed material from a similar position. I suggest that the manufacture develop a more accurate fixture for welding the center shaft, and then make final adjustments to the Tri-Plate surfaces after the welds have cooled. This will reduce the amount of runout, lengthen the Tri-Plate service life, and improve chipping performance levels.
...
show more
Reviewed in the United States on September 14, 2014 by JF
Pros: super easy to assemble and use! If it can be fed down the neck, it is ground up instantly. The Honda motor is super quiet, powerful and easy on fuel. Cons: For this price point, it should come with a means of towing it around and a spare pair of blades. I modified the discharge shute as I wanted to broadcast chip instead of the bag thing. All in all, this machine is incredible...Happy Father's day to me! Thank you Patriot Products!
...
show more
Reviewed in the United States on June 10, 2021 by Daniel
I purchased this Patriot wood chipper product WITH the higher priced Honda motor so i could be assurred of no problems. I bought it for chipping branches, limbs, clean up around the property. It literally bogs down on every branch, and quits running. It will not chip 3" diameter branches as it claims. If you have a branch that is NO larger than 1" in diameter and is PERFECTLY straight with no bends or curves whatsoever (have you ever seen a branch like this?) then it might work for you. If you strictly want to shred leafs there are a lot cheaper ways you can go. I wanted this to work because Patriot is an American company and its important to me to buy American. So im very disappointed to give their product a poor review.
...
show more
Reviewed in the United States on May 10, 2012 by Investment_Reader
ok i read the other reviews.... some folks are really unrealistic...twisted branches..yeah that happens, cut em to fit!! This thing eats everything that fits in it and if it doesn't fit trim it! It is a beast! and no I'm not affiliated with Patriot Products in any way. Fill it with gas and oil after simple assembly and your ready for business. I highly recommend!!!!!
...
show more
Reviewed in the United States on April 15, 2013 by William Kautz
Works better than expected. American made quality!
Reviewed in the United States on May 15, 2021 by SRJ