LAUNCH CRP123I V2.0 Elite OBD2 Scanner 7 Reset Scan Tool,Lifetime Update

Features

• Next Level with CRP123I V2.0, 2026 New upgraded of crp123I/crp123E: The 2026 LAUNCH 123i v2.0 Car Scanner offers professional diagnostic capabilities, including 4 system diagnostics, 7 essential reset services, and a 4-in-1 live data stream display. 5" touch screen user-friendly interface, make car maintenance easier and more efficient. 11 languages available, this obd2 scanner is perfect for 99% car owners worldwide.
• 7 Hot Reset Service: LAUNCH123i v2.0 car scanner diagnostic tool simplifies essential tasks by offering Oil Reset, SAS Reset, Brake Reset, Throttle Relearn, DPF Regeneration, ABS Bleeding, and Battery Reset(BMS Management) and helping you restore optimal vehicle performance after repairs. Whether you're a DIY mechanics or a first-time car owner tackling repairs at home.
• ABS, SRS, Engine ,Transmission Systems,Check Engine Code Reader: LAUNCH CRP123i v2.0 supports ABS, SRS, Engine ,Transmission systems diagnosis, read &clear fault codes, turn off MIL, ABS, SRS, Engine, Transmission warning lights! In addition, obd2 scanner diagnostic tool can automatically recognize vin and perform all 10 modes of obdii tests: live data stream, read freeze frame data, view readiness status, O2 Sensor Test, On-Board Monitor Test, Component Test, retrieve vehicle information.
• 4 In1 Data Stream Battery Test: LAUNCH CRP123i v2.0 shows live data 4 in 1 for 4 main systems including the change of Accelerator Pedal Position Sensor, Throttle valve position , Generator load signal,Fuel Tank Pressure, Engine RPM,Long&Short Fuel Trim and so on. 123I V2.0 Car scanner help customers to better analyze the abnormal parameter. Battery voltage test monitors real-time battery voltage of 12V vehicles in graphical
• 99% Vehicle Coverage+FCA Auto Auth: LAUNCH CRP123I V2.0 OBDII scanner works on more cars, over 100000+ vehicles, over 85 car brands,cover OBDII/EOBD/JOBD&CAN protocols vehicle(After 1996). But for Transmission/ABS/SRS diagnostics, the automotive scanner CRP123i works more better with cars in 2006 or later, the new cars can up to 2026. With integrated AutoAuth, diagnose 2017+ FCA SGW-equipped cars
• Level-Up Hardware:The LAUNCH scan tool CRP123i V2.0 runs on Android 8.1 and features newly developed chips that deliver 5x faster, more stable processing speeds. The large 5 color touchscreen combines with button navigation for a 2-in-1 experience, offering easy-to-read 1280x720p clarity. With 32GB of memory, the CRP123i V2.0 diagnostic tool run faster than ever. Plus, its 6100mAh rechargeable battery ensures longer usage time.
• Struggling with Maintenance? Get Instant Help!: LAUNCH scanner with built-in smart support (Built-in DTC Lookup Library + DTC Google Search + DTC Help+online feedback), this LAUNCH CRP123I V2.0 diagnostic scanner will accurately pull error codes and tell you exactly what the problem is.If you have any doubts about compatibility with your vehicle, please contact our customer service team for help

Description

LAUNCH stands as a high-tech enterprise committed to researching, developing, and producing car diagnosis, test, maintenance solutions, and related product. We focus on automotive technology through independent design and development of specialized software products. We offer our customers comprehensive services including software design, maintenance, and updates related to automotive testing, ensuring superior solutions tailored to their needs. Launch Tech Co., Ltd was founded in 1992. Focusing on automotive scanners for 32 years.Global leading brands,worthy to trust! LAUNCH is the NO.1 of the global market in automotive diagnostic tools! With over 1,000 international patents, we are reliable and trusted! The engineer repeatedly tested the test version of the product and then carried out mass production. We actively adopt the suggestions and opinions of all customers, so that the product is almost perfect and can be always updated. Android 8.1 OS: Quick to learn and easy to use, and newly developed chips brings 5x faster stable processing speed. 5inch Touchable Screen: Large 5” Color Touchscreen combined with button navigation 2-in-1, 1280*720P clarity, easy to read. Logically Well-laid Interface: The ergonomic design of the back prevents the hand from slipping off, and the position of the jack is also very easy to use. Lifetime Free Updates: We provides wifi free update with high update frequency, new features released monthly, new car models updated weekly, one-Touch update via WiFi to enjoy more functions, get newest software, and improve the performance. NO extra Fees! Longer Battery Life: 6100mAh built-in rechargeable battery supplies a constant flow of energy and mobile diagnostic way, no worry for power consumption.Bigger Battery Capacity,which running 20+ hrs . Bigger 32GB Memory:The running memory from 32GB, makes the scanner's running speed faster. Work out of Use: The OBD2 scanner is also easy to use by connecting to WIFI, there is no need to update or download any APP before use. Full OBD2 Protocols: Compatible with OBD2/EOBD/JOBD/CAN protocols and the data upgrade new makes up to 2023-2026 models, including 12V passenger cars, SUVs, minvans, 12v light-duty trucks,pickup,gasoline, Minivans and etc (Check compatibility before order.) Intuitive 4 in 1 Data Analysis: 1.displays live data in text and 4-in-1 merged graphs for easy data review and analysis; 2.Record and Playback test results with one touch; 3.Prints out Diagnostic Report anytime with easy connection to a Windows PC. Real Time Battery Voltage: Monitor the real battery to check vehicle battery voltage status in real time. 11+ Languages to Use: English, French, Spanish, German, Korean, Japanese, Portuguese, Italian,Polish, Traditional Chinese, Russian. One Scan Tool to Cover 99% of Cars! Compatible with a Wide Range of Vehicles, No IP Limit! 7 Hot Reset Functions Code Reader And In-Depth Diagnostics 1.Oil Reset: To perform reset for a new calculation of Engine Oil Life system once changed the oil, clear the light. 2.Steering Angle Calibration(SAS):To clear the fault steering angle sensor memories and reset the steering angle to zero to keep the car running straight,and turn off steering wheel warning light. 3.Throttle Adaption:To obtain the correct idle speed after replacing electronic throttle body, disconnecting a battery cable, clearing a check engine light, etc. The symptoms are, idle is too low, too high, or erratic. Sometimes the engine stalls when you stop at the traffic light. And you may see the check engine light come on with the idle speed related trouble codes. Please Note: Special features are not applicable to all models. [2026 NEW !]ABS Bleeding.Replacement may trap air in the circuit such as pipeline, ABS pump and various solenoid valves in ABS pump,then the brake pedal becomes spongy or takes longer time and distance than usual to stop car, it means there is air in Oil circuit in ABS system. [2026 NEW !] Brake Reset :Cars and trucks with electronic parking brakes can be a pain to service without a scan tool allowing you to retract electric parking brake calipers. This feature allows you to reset the brake pad after the replacement. [2026 NEW !] DPF Reset: Lets you perform the forced regen cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a regeneration cycle is completed, the DPF light automatically goes off. [2026 NEW !] Battery Registration: lets you register new replacement batteries that have the same parameters on your car,( Such as original battery,Other same type with same or big capacity battery ),clear faults from the dashboard and display current battery details of your Vehicles after you replace your old car battery. ***Note:The special functions do not apply to all models, if you are not sure whether these functions are applicable to your car model, you can ask us before you purchase. Please confirm with us whether the function is suitable for your car before purchase.>> "MALL" SERVICE: You can subscribe the full functions (single brand) in the Mall to know "exactly" what is wrong with your whole vehicle and fix the issue immediately. 4 Systems Diagnostic Tool: Engine/ABS/SRS/Transmission systems for a healthy diagnostic, retrieve ECU information, read/ erase codes, turn off warning lights. 1. When you want to know the specific problem of your car but it is not convenient the auto repair shop. 2. When the maintenance has been completed but the dtc light is still on. 3. When you're on a tight budget and want to save money and make repairs. Engine System(ENG): The launch crp123i V2.0 elite diagnostic tool can help detect the engine ignition, fuel injection, conditions in Engine system to enhance vehicle performance. It is not only suitable for engine systems, but also covers the full obd2 mode, allowing faults to be quickly and accurately located and easily resolved. >>>Function: 1. Quickly read/erase current, permanent, and pending codes in the Engine system; 2. Show real-time change of critical data, related with fuel and manufacturer-specific parameters; 3.Turn off the Check Engine Light on dashboard. Transmission System(AT) : Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.-Gearbox is the most common problem encountered by customers, if it is not paid attention to, the consequence is the need for a lot of maintenance costs. It can help you repair your gearbox in time, saving time and cost. >>>Function: 1. Pull/clear diagnostic codes from the transmission system;2. Display live data from the transmission system to detect whether the car's speed and load match its transmission's output. Supplemental Restraint System (SRS): Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.Read and clear fault code in SRS (Airbag) system and turn off warning light of airbag for making sure engine work properly and safely.-One of the most important checks on your own safety. Can find the problem of airbag in time, timely maintenance. It can extend the service life of the airbag. Improve vehicle safety. >>>Function: 1.Access Supplemental Restraint System, to diagnose trouble codes, and pinpoint the faulty part; 2.Read/Clear codes; 3. Turn off the SRS warning light. ABS: Read and clear DTCs data flow in the ABS system. Performs various tests to check the operating conditions of ABS System, and turn off the warning light.-For the safety of you and your family, the health of the brake system is also very necessary. It can help you find problems in time and repair brake pads in time. >>>Function: 1. Read/clear error codes in the ABS system, and turn off the ABS warning light;2. Monitor and playback the real-time data of all brake components in graphic, including the speed of each wheel, ESP sensors data, Brake assist data, and CAN signals data. LAUNCH CRP 123i V2.0 supports for Generic OBDII Codes (P0, P2, P3 and U0); manufacturer specific codes (P1, P3 and U1); pending codes; freeze frame data; monitor and I/M readiness; live PCM stream data; graphing functionality for up to four (4) live data streams include the Engine Coolant Temperature, Long&Short Fuel Trim, the change of Accelerator Pedal Position Sensor , Throttle valve position , Generator load signal,Fuel Tank Pressure , Engine RPM, and so on; clears DTC codes and turns off the MIL; resets monitors; provides Data Link Connector (DLC) location hints. Live Data Display: It shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter. Data recording functionality is amazing, customer can record the live data stream for up to 10, simultaneous, PID's. Once these have been recorded they can be played back in text format and/or graph format. In 3 modes display:1. Numbers and lists (default);2.Wave patterns;3.Merged graph (max 4 data can be merged). Playback timeline can be scrolled, paused, viewed, etc. Live Data Graphing: It provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1 , Throttle valve position , Fuel Tank Pressure , and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it. Live Data Record: Allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly. Live Data Playback: After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record". Live Data Share: It will let you share any data status and content you want to display anytime, anywhere. Live Data Print: Reports can be saved in PDF format as well as shared via email with WiFi connection and can be sent to a computer connected to a printer for printing. Record and View History:Once a vehicle diagnosis has been made, it will record every detail of the diagnostic process. The view history record feature provides quick access to the test vehicle and allows the user to resume the diagnostic process from the last operation, rather than starting from scratch. Accuracy Diagnostic Report: LAUNCH CRP123i V2.0 car scan tool will record every detail of the diagnostic session. For all DIYers and repair shops, this LAUNCH mechanic scanner enables your to share & print a diagnostic report for further analysis, no worry about forgetting details. Online Feed-back: Use this option to submit your tricky vehicle issues for analysis and troubleshooting, solve your 99% of troubles. LAUNCH CRP 123i V2.0 supports All OBD2 Test, Turn Off the MIL(Malfunction Indicator Light), Check the Status of Misfire System and Fuel System, save your money for paying fine tickets. Full OBD2 Functions: 1.Read Codes: To find out all the detailed description of the Diagnostic Trouble Code DTCs of ABS/SRS/Transmission/Engine systems and provides convenience for diagnostics & maintenance. DTC library gives you detailed code definitions for repair reference. Newly added Code Search function also allows you to connect with Google for massive online code information. 2.Clear Codes: After certain repairs have been carried out, you can use this function to erase the codes easily and drive your loved car to the next destination happily. 3.Read I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition. 4.Read Live Data Stream: Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter. This function will let you see 4 system such as engine performance information, if there are any trouble codes or issues with your engine or ECU. 5.Freeze Frame Data Viewing: Request freeze frame information.Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle. 6.Read Freeze Frame Data: Check certain vehicle conditions which are recorded by on-board computer at time the e mission-related fault occurs. 7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors. 8.On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.Locate Misfire Cylinder and Diaplay Live misfire counts. 9.Read Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. 10.EVAP Test: Major in Fuel Tank System (Carbon canister test).The EVAP test function lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically. There are 2 ways to help you to read DTC:DTC HELP & CODE SEARCH. For Example: 1. Select Health Report>Tap Enter>Check the information and tap OK>Select Read DTC>You can select "Help" or select To expedite troubleshooting and enhance your diagnostic experience, the scanner now includes real-time monitoring of your vehicle's battery voltage. Featuring visual indicators, it allows you to easily determine whether the battery is operating within standard parameters, ensuring reliable performance. The OBD2 scanner automatically generates and stores diagnostic reports, including static operating data, for easy vehicle maintenance reference. You can share these reports via email or print them for technical assistance. It also reads historical records, helping you track your vehicle’s condition over time. Auto identify the Auto VIN(CIN/VIN/CVN), read version information of ECU.And the Code Search function allows you directly connect to Google.com to get more online information about the current DTCs like tech notes, code to diagnose, which can greatly facilitate diagnostics and saves a lot of time for the repair. The CRP123I V2.0 diagnostic scanner with built-in-app mall where owners can purchase vehicle-specific models and unlock special features. Feel confused about certain diagnostic problems? This obd2 scanner allows you to submit online feedback of your diagnostic problems to LAUNCH for troubleshooting to get valuable solutions.

Brand: LAUNCH

Power Source: Battery Powered

Product Dimensions: 10"L x 3"W x 7"H

Operating System: Android 8.1

Screen Size: 5 inches

Brand Name: LAUNCH

UPC: 884508003844

Number of Items: 1

Manufacturer: LAUNCH

Included Components: 1*LAUNCH CRP123i OBD2 Scanner

Model Number: CRP123i v2.0 obd2 scanner

Manufacturer Part Number: ‎CRP123i obd2 scanner

Manufacturer Warranty Description: 5

Power Source: Battery Powered

Operating System: Android 8.1

Screen Size: 5 inches

Automotive Fit Type: Universal Fit

Native Resolution: 1280x720

Item Dimensions L x W x H: 10"L x 3"W x 7"H

Item Highlight: Oil/SAS/Throttle/Brake/BMS/DPF Reset/ABS Bleeding, Multi System Code Reader,FCA SGW