LAUNCH X431 PRO3S+ Smartlink HD Heavy Duty Truck Scanner,2026 Diesel&Gasoline Bidirectional Diagnostic Scan Tool with J2534 Protocols,Topology Map,60+Service,ECU Code,CANFD &DOIP,2 Yrs Free Update

Features

• 2026 LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles:Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
• J2534 Protocols with Smartlink C:Advanced OEM J2534 code ,Helps access direct data online, replace existing software/firmware in ECU,code new ECUs and fix software-controlled issue.
• Over 60 Service Reset Functions + Bi-Directional + ECU Code:This scan tool can support ECU Code,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
• Advanced Hardware & All Systems Diagnosis+Topology Display:Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
• Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages: LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.

Description

LAUNCH was founded in 1992. Focusing on automotive scanners for 30 years.Global leading brands,worthy to trust! LAUNCH is the global market share of automotive diagnostic tools is the first!,it has more than 1000 international patents.Trust worthy! Adhering to the spirit of Create & Change, LAUNCH designs and develops software products by itself, and provides customers with maintenance, update and support and other services related to automotive diagnostic and test. You might be wondering why the LAUNCH X431 PRO3S+ with SmartLink HD costs over $500 more than other X431 PRO3 models？ Here's the difference: This is LAUNCH the only model that comes fully loaded from the factory with both gas and heavy-duty diesel software — plus all the necessary connectors — right out of the box. That means it's ready to diagnose everything from passenger cars to Class 8 trucks without any additional purchases.Other PRO3 models may say “HD SCAN compatible,” but those typically require you to buy the heavy-duty truck software and diesel connectors separately — which can add nearly $800 to your total cost. Bottom line:You're not paying more — you're getting more,and avoiding a costly surprise later! If any questions, please be sure to confirm with us before making a purchase to avoid costly expenses : cardiag-aftersales @hotmail. com Upgraded of LAUNCH X431 PRO3S+HDIII, LAUNCH TOP Scanner X431 PRO3S+Smartlink HD ranks No.1 in vehicle coverage.UPGRADED VERSION OF LAUNCH X431 PRO3S+ELITE: 12V&24V Vehicles ALL IN ONE, Full Bi-directional Control + Over 60 Reset/Service Functions + Actuation Test + Adaptation+ Matching+ Reset + Initialization +OE-LEVEL Component Matching+Module Installation+Online Code+ SCN Code+Online Account Login Service+Online Calibration+Online Parameterization+Guided Functions+Power Balance+Offline Code+Reset Hidden Functions.....2026 Newly Added Functions,TOP VCI Smartlink C2.0 with J2534,Upgrade Topology,CAN FD/DOIP Protocols,New Energy Battery Pack,10+ High-end functions,Super Remote Diagnostics... Make no-hard-to-repair cars in your garage. Moreover, its 2-year free update helps you save budgets and do more functions on the newest vehicles. UPGRADED Hardware: ADVANCED Software: More:FCA/Renault AutoAuth;CAN FD/DoIP Protocols;Auto Scan;Pre & Post Scan;12-in-1 Live Data Monitor in Graphic;VAG Guided Function;Non-16pin Connectors & Cables Kit;2 Year Free Updates etc.Best Choice for :Technician , advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual. ECU CODE: Online Code/Matching/Calibration/Relearn/Personalization/Customization With ECU code functions, LAUNCH X431 PRO3S+Smartlink HD will improve vehicle performance, customize individual customization, Update hidden functions, reset the annoying functions, the adaptive data for certain components after repairs or replacements, customized configurations for high-end models,etc to enhance fuel efficiency and ensure safe driving. 1.Online Code: Access manufacturer databases for guided repair procedures and module code. 2.Module Replacement & Code: Required code and configuration for new modules after installation, including VIN assignment to a new ECU. 3.Post-Repair Component Setup: Perform necessary resets, initialization, and matching for various components after they have been repaired or replaced, including:Suspension system initialization,Sunroof motor relearn,Perform injector replacement code after installation,Reset Transmission Control Module after repair,Battery registration for different types,Height sensor reset 4.Activate Built-in Features: Adjust various user-enabled settings to personalize your driving experience, for example:Reset auto start-stop memory function,Configure daytime running light behavior,Adjust safety belt reminder chime settings,Activate or deactivate transport mode for vehicle preparation,Reset transmission adaptive values after repair or battery replacement. 5.Convenience Personalization: Activate or adjust user-enabled features such as LED lighting configuration, auto start-stop memory, and seat/mirror memory settings. **All above functions are not available for some specific car models. Reach us for details. >>J2534 :Pairing with the SmartLink C V2.0 device (serving as J2534-Compliant VCI), you can operate a PC or LAUNCH X431 PRO3S+SmartLink C diagnostic tool to download OEM software and install J2534 files from LAUNCH official website, to perform the J2534 for some vehicles. Note: Reach us to get the J2534 Operation manual. Supports the following diagnostics communication protocols: CAN/CAN_PS/FT_CAN_PS/SW_CAN_PS/FT_ISO15765_PS/ISO15765/IS015765_PS/SW_ISO15765_PS/ISO14230/ISO14230_PS/ISO9141 /ISO9141_PS/J1850PWMJ1850PWM_PSIJ1850VPW/J1850VPW_PS/FD_CAN_PS/FD_ISO15765_PS . [What can this J2534 Function do for you?](1) Operate OEM without using the OEM tools(2) Replace ECUs: code blank ECUs(3) Write-in Data: update used ECUs(4) Repair missing ECU information(5) Upgrade ECU software version [How to Use SmartlinkC V2.0 as a J2534 Tool?]1.Download and install the drivers for Smartlink V2.0 at the LAUNCH official site. After you enter the LAUNCH website, please click "Tool download", then you will find it. If you can not visit the website, we can send it to you directly.2.Download the OEM software in Automakers' Service Webs to your computer. (The seller does not provide the OEM software).3.Connect the Smartlink V2.0 to your computer with the included USB cable, or via the stable and solid 5G WiFi network.4.Connect the Smartlink 2.0 to your vehicle' s DLC port with/without the included extended OBDII cable. >>Audi /VW Firmware Protection Cancel Features:One feature most techs really want is to clear firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications. >>(PMI) Module Installation:Support PMI function,Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription. >>Bi-directional Control: ( ACTIVE TEST ) --For cars :Injector Buzz Test/Idle Speed Adjustment/Window/Mirror/Door test/Pump and Valve tests/Fuel Pump/Solenoid valve ,tank Ventilation/Switch/cylinder correction off/on/A/C Compressor Activation/Turn on the radiator fan/Modulate the throttle/cycling the a/c/clutch on and off/Acceleration Device Test,etc .(vary by car model,year) --For Heavy duty Trucks: Cylinder cut-out test/compression test/injector volume commands/injector coding/rail high pressure test/SCR catalyst regen/Cylinder balance test/DPF regen/VGT calibrations/Aftertreatment reset/Parameter changing/glow relay activation check/reset the DPF filter,etc.(vary by car model,year) Power balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem. **All above are not available for some specific car models. Reach us for details. In addition to amazing & powerful diagnostic function, LAUNCH X431 PRO3S+SMARTLINK HD Automotive obd2 scanner also features 60+ service functions to help you complete your repair work at ease. These special functions include but not limited to : 1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.2.EPB Reset:Help replace and reset the brake pad. 3.BAT battery service(BMS):Clear the fault information of low battery and make it match again4.DPF service 5. SAS Steering Angel Sensor Reset:Reset the steering angle to zero to keep the car running straight.6.Matching: reset any lost and add new. **ONLY for cars with easy system.7. ABS Bleeding: Help exhaust the air.8. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.9. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.10. Throttle Adaptation: Initialize the throttle actuators to the default state. 11. AFS Headlamp Reset: Initialize the adaptive headlamp system.12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.13. Suspension Reset:Adjust the vehicle body height sensor for level calibration.14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.15. Gear Learning: Monitors certain camshaft position sensors signals.16.Tire Reset:Set the size parameters of the modified or replaced tire. 17.A/F Reset:Set or learn Air/Fuel ratio parameters.18.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.19.Coolant Bleeding:Activate the electronic water pump. 20.Language Change:Change vehicle system language.21.Nox Sensor Reset:Reset catalytic converter learned value stored in ECU.22.Stop/Start Reset:Set up the automatic start-stop function in ECU 23.Seat Calibration:Calibrate the memory in replaced or repaired seats. 24.Transport Mode:Deactivate the transport mode.25.Windows Calibration:Perform door window matching to recover ECU initial memory.26.AC System Relearn/Initialization.28.Reset Fuel Alcohol Level.29.Reset Fuel Trim .30.High Voltage Battery Diagnostics.31.GPF Regeneration.32.Camshaft/Crankshaft Sensor Relearn 33. Interactive Vehicle Dynamics (IVD) Initialization Sequence. 34.Fuel Economy Test35.Halt/Resume Transmission Adaptive Learning. 36.Passive System(PATS)Functions. 37.Relearn Vehicle Data.38.Initialization Of Automatic Tailgate .38. Initialize Power Window Regulators; 39. Seat Standardisation 40.Normalise Slide/ Tilt Sunroof; 41.Activate Contactless Vehicle Access 42.Block And Enable Remote ; 43.Power-Down Command 44.Autoaddressing Ambient Light BDC.45.Auxiliary Heater 46.Drain/ Fill The Refrigerant Circuit 47.Installation Position Of Flap Motors ;48.ETS Test Of Lithium lon Battery ;49.Register Battery Exchange 50.Reset Adaptation Values 51.Adjusting The Electromotive Throttle Controller; 52.Injection Quantity Compensation; 53.Open And Close Radiator Blind;54.Activate/Deactivate Workshop Mode ; 55.Start-Up For Brake Pedal Travel Sensor .etc.>>>>!! Keep Growing with UPDATES !!>>>>>(depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized. 300+ Repair Functions For Specific Vehicles (in-vehicle catalog) Furthermore, the Launch scan tool also developed 300+ functions for specific models. Compared with other diagnostic scanners that can only do the Reset function, the bi-directional scanner can finish deeper and wider Reset, Regeneration, Initiation, Matching, Calibration, Replacement, etc. >>>>Q: Why do i only see 38 service functions on my tablet, when its advertised 60+ service functions ? >>>>A: Actually, you can "quick access" to 38+ most commonly used special functions under the main menu "service functions", but the listed commonly used special functions below this menu is obviously NOT ALL special functions you will get from our LAUNCH X431 PRO3S+SMARTLINK HD. YES , You can get 60+ for free as we advertised !! (some car models up to 300+ Special functions (Calibration,relearn, adaption ,initialization) >>>>Q: If so , How can I locate the 60+ or even more special functions ? >>>>A: you can locate more than 60 reset functions (special functions) under module/system after you access to your vehicle software . And it's completely free to use permanently. Never buy any "special functions“ under "MALL" menu, because you can find all these special functions under the model software and use them for free all your life. If you have any questions about this, please r-each to us and we will help you as always. ***Note: Functions are not compatibility with all vehicles, please send car make, year, model, VIN# and functions you need to us to check vehicle compatibility. >>>OE-LEVEL ALL Systems Diagnostics LAUNCH X431 PRO3S+Smartlink HD 2.0 support read&clear DTCs, read live data stream and perform active test and services functions for ALL modules of 99% of cars&Trucks on the road and does so to OE levels. Rather than using separate OE diagnostic tools, the Launch scanner LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 helps you increase efficiency and control costs. The systems include but are not limited to: PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more… Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more… BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, ABS ESP system, Air Condition. Electric Windows, and more… Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System,and more… >>>Intuitive Topology Mapping V2.0 -Display each module's status and the number of DTCs in one page -Show real communication structure of all ECU module, easy to understand wiring schematics for cars -Tap to enter the systems or modules with fault codes -Zooming in and out to check the color coded modules Visualizes the car systems with a diagrammatic tree, shows the system normal,faulty and not equipped by diagnosing the whole system. Intuitive Use Topology Mapping V2.0 show the structure of communication between modules,and checks all system conditions with One-Click Locate the fault in a second show different health status in different colors. It is a Great Assistance for mechanics and professionals to have more efficient diagnostic work than ever before!! Saving the Time and Money!! What you are watching is 2026 Newest released LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/pick-up/etc Level-up Functions added in 2026: >>>2 YEARS FREE UPDATE SUPPORTED: LAUNCH X431 pro3s+smartlink hd would never fall behind diagnosing modern vehicles. With constant and weekly updates, it gets better and better, adding the newest cars up to 2026,to its coverage and more advanced features to its list. That’s a big savings on software updates! And After 2 years free update,You don’t have to renew the diagnostic tool to keep using it. >>> If you encountered any inconsistency after you received the tool, please provide the relevant screenshots to us. Please reach us here ( cardiag-aftersales @ hotmail.com) One Tool to Cover 99% of Cars! Compatible with a Wide Range of Vehicles When choosing an car scanner diagnostic for all cars, one of the most important considerations is how compatible it is with different vehicles. This LAUNCH diagnostic tool has expend vehicle coverage, being well-matched with over 99% of popular cars from America, Europe, and Asia, even the most recent models till 2026.COMPATIBLE WITH CARS/TRUCKS/BUSES/TRAILERS/EXCAVATORS/DIESEL ENGINE/CONSTRUCTION MACHINERY/PICK-UP/HYBRID VEHICLE,etc. Here is the Vehicle List : LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 scan tool Commercial vehicle Part : 1)Engine diagnosis 2)Natural gas diagnosis 3)Post-processing diagnosis 4)Calibration function: support Chaochai calibration, Dongfeng Renault calibration, Cummins calibration, Shangchai calibration, Weichai calibration, Xichai calibration, Yuchai calibration, heavy truck calibration, Yangchai calibration, etc.; 5)ECU rewriting: support Bosch ECU brush writing, Nanyue single pump ECU brush writing, Bosch bottom layer brush writing, natural gas ECU brush writing, electric ECU brush writing, Del-phi ECU brush writing, China National Heavy Duty Truck ECU brush writing, Tenneco DCU Wait; New CAN FD & DoIP Protocol Supporting (NO Need Adapter) LAUNCH scanners are always connected with the needs of their customers.2026 Upgraded version of LAUNCH X431PRO3S+ Smartlink HD introduces new protocols CAN FD & DoIP to the vehicle diagnostic process for enhancing vehicle diagnostic speed and vehicle communication rate. CAN FD standard in LAUNCH X431PRO3S+ Smartlink HD increases bit rate of up to 4 Mbit/s during payload transmission and processes greater quantities of diagnostic data, and saves both time and costs. compatible with GM Models including Onix 2020-2026, Tracker 2020-2026, Suburban 2021-2026, Tahoe 2021-2026, Montana 2026, Silverado 2026, Electra E5 2026, Escalade 2021-2026, Escalade ESV 2021-2026, Sierra 2026, Yukon 2021-2026, Yukon XL 2021-2026, and Chrysler Models including Grand Cherokee(WL) 2021-2026, Grand Wagoneer 2022-2026. DoIP allows your LAUNCH X431PRO3S+ Smartlink HD scanner to run a 100Mbit/s ultra-faster data transfer rates at a low hardware cost and achieve remote vehicle diagnostics capabilities in all ECUs connected to it. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later). FCA Secure Gateway LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures. Renault Security Gateway Function Renault Security Gateway Function is used for release Renault’s gateway to perform service functions, active tests, code, etc. without the need for a dongle or PC. With this feature, the car scan tool X431PRO3S+SMARTLINK HD allows you to pay to perform those functions via one-click on these models (after 2019), such as CLIO V, CAPTUR II, CAPTUR II CN, MEGANE IV ph2, ESPACE V ph2, TALISMAN/SM6 ph2, NEW ZOE, ARKANA CN, XM3/NEW ARKANA, NEW SANDERO/LOGAN, etc. FULLY LOCALIZED 25 Languages FREE TO USE ? YES ! choose your native language without encountering any sort of language barrier English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional. [10+ Add-on Service Modules] This LAUNCH scanner can work with 10+ service tools to better suit your various repair needs: ✔O2-1 Scopebox ✔S2-2 SensorboxS2-2 Multimiter✔VSP-600✔BST360✔X431 TSGUN✔X-PROG3 ✔X431 WIFI Printer✔EG100 EV Clamp✔EM 101N etc. [Note: These add-on tools are not included in the package] ✔️NEW OPTIONAL FUNCTIONS:✔️ (You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK C HD,need EXTRA-BUY ) 10. X-431 FIX (HaynesPro) package is available for purchase at the Mall now.The package includes: technical service bulletins (TSBs), links to factory-grade trouble codes and related case descriptions. Also included are tested problem solutions and tips, as well as guided vehicle diagnostics; this data base also provides vehicle-wide system wiring diagrams, installation locations, and fault code information; this database contains all the common information for European and American vehicle manufacturers and it is continually being updated. What Comes with LAUNCH X431 LAUNCH PRO3S+ SMARTLINK HD automotive obd2 scanner?

Brand: LAUNCH

Power Source: Battery Powered

Operating System: Android

Screen Size: 10.1 Inches

Language: English

Power Source: Battery Powered

Operating System: Android

Screen Size: 10.1 Inches

Language: English

Brand Name: LAUNCH

UPC: 756029669864

Manufacturer: LAUNCH

Model Number: LAUNCH PRO3S+SMARTLINK HD

Manufacturer Part Number: LAUNCH X431 PRO3S+ Smartlink HD

Item Type Name: LAUNCH PRO3S+ SMARTLINK HD

Manufacturer Warranty Description: 5-year warranty

Included Components: BENZ-38,NISSAN-14+16,BENZ-14 ,BMW-20,CHRYSLER-6, FORD-6+1 ,GM/VAZ-12, HONDA-3,KIA-20 , MITSUBISHI/HYUNDAI-12+16, TOYOTA-17, TOYOTA-22, BENZ-14 ,CAT-9, HYUNDAI-16 , ISUZU-20 ,IVECO-30, IVECO-38, JUMPER 10, MAN-12, MAN-37, MITSUBISHI-12+16, RENAULT-12, Type II OBD 9, VOLVO-8, HD15F to OBDII 16 Connector ,UK Plug, EU Plug ,US Plug, DB15F to HD15F Cable, Network Cable, Type A -Type B USB Cable, Type A -Type C USB Cable, PIN envelope,Quick Start Guide, Power Cable, Cigarette lighter Cable , Switching Cable 1-9, OBD 16 connector,OBD 6 connector, X431 PRO3S+ host,SmartLink C HD V2.0