APPLIED MEMBRANES INC. 4" x 21" Low Pressure Reverse Osmosis Membrane Element for RO Tap Water Treatment System | 1,148 GPD @ 150 psi Low Energy | M-T4021ALE

Applied Membranes 4" x 21" Low Energy Reverse Osmosis Membrane | 1,148 GPD @ 150 psi LE RO Membrane (Low Pressure Membrane) AMI Part Number: M-T4021ALE Membrane Size (Nominal): 4 x21 Membrane Dimensions: 3.9"Dia. x 21"L Flow Rate: 1,148 GPD (4,345 LPD) Applied Pressure: 150 psi (1 MPa) Stabilized Salt Rejection: 99% Outer Wrap: Tape Wrapped Membrane Type: Low Energy Tap or Brackish Water Membrane Sheet: TFC (Thin Film Composite) Element Type: Spiral Wound Feed Water Test Temperature: 77°F (25°C) Single Element Recovery: 8% Chlorine Tolerance: 0 Feed water pH Range: 2-11 End Style: Male PWT (Stinger Style) Country of Manufacture: United States (USA) AMI Low Energy (Low Pressure) LE RO Membrane elements are specially designed to run at 150 psi while producing similar product flow as standard elements at higher pressures. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tapwater and brackish water applications. AMI LE Low Energy RO membrane elements produce high quality water from tap or brackish water in small commercial RO systems. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems. AMI Commercial RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. M-T4021ALE can be used as direct replacement for many industry-standard 4x21 Size RO Elements with 3/4" male product water tubes ("stinger style") which are rated at 150 psi, including HF1-4021, HF6-4021. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.