Trademark Soundproofing Mass Loaded Vinyl 1lb - MLV Soundproofing for Wall Sound Barrier - Sound Insulation - Made in USA - 4' x 25' Covers 100 sf - Made in USA

Features

• High-Efficiency Sound sound barrier quiet wall with a proven 27 STC rating - 1/8 inch thick dense rubberlike material - 1 Pound per Square foot.
• Mass-loaded vinyl 1 lb soundproofing for walls, floors, and ceilings, and more
• Environmentally safe - Non-toxic and odorless, made of Virgin material, no regrind or recycled material
• Improve sound quality, creating a serene environment. many other places providing instant mass with sound barrier insulation to any location.
• Perfect for Apartments, Studios, Classrooms, Medical Facilities, Nightclubs, Cars, Appliances, Pipes, exterior fences, and outdoor sound barrier fences.
• Easy Installation - arrives with clear and user-friendly installation instructions. If you require further assistance, we are constantly at your service!

Description

TrademarkSoundproofing is unique for its top-tier product with a decade of field-tested, providing a full range of soundproofing products and professional guidance, serving industries like healthcare, hospitality, office buildings, and residential homes. We focus on making effective soundproofing attainable and cost-effective. Real sound control that works. Our products block noise, seal gaps, and deliver proven results—built for performance Yes, Our MLV effectively block traffic noise! It has an STC rating of 27 and is specifically designed to block airborne sounds like street noise and engine noise. TMS MLV can and is used outdoors as long as you have a sturdy fence to nail it too. Some of the sound will be blocked, however some sound will travel "over" the fence. Create a dense sound barrier that blocks street noise and loud neighbors from entering your space Turn Your Living Room Into a True Cinema Experience Enjoy a quieter, more peaceful space with improved comfort and focus Get your recordings crisp clean, and controlled. What is '1lb per square foot' mean? It means every square foot of this material weighs 1 pound. Heavier = denser = better at stopping sound transmission through walls, ceilings, and floors. this blocks noise from passing through the structure entirely. Can I use this for a ceiling, or only walls? Yes, it works on ceilings. Nail it to joists before drywall installation. It is especially effective in basement ceilings to reduce impact noise and airborne sound from the floor above. What STC rating does this product have, and is that good? This MLV has a tested STC (Sound Transmission Class) rating of 27 when hung on its own, Higher STC = more blocking. How do I install it? Do I need special tools? No special tools needed. Cut to size with razor or a utility knife. Attach to studs, joists, or existing drywall using staples, nails, or construction adhesive. the seams should be closely together and be sealed with MLV tape. Will this smell? I am putting it in a bedroom. No. This is made from 100% virgin vinyl with no regrind or recycled filler. There is no off-gassing or chemical odor once installed. Recycled MLV from other brands can have a rubber or chemical smell; Safe for bedrooms, nurseries, and living spaces. This roll covers 100 sq ft. How do I figure out how much I need? Measure total square footage of the surfaces you want to cover L x H for walls, L x W for floor or ceiling. Add 10% for overlaps and cuts. (ex. 10 x 10 room's four walls at 8 ft ceiling height, is about 320 sq ft, you would need roughly 3 to 4 rolls) Can I use this to wrap pipes or HVAC ducts? Yes. The material is flexible enough to wrap around round pipes and rectangular duct work. Cut strips to the width you need and wrap tightly, overlapping each pass by at least an inch. Secure with MLV tape or metal strapping. Can I use it on an outdoor fence? Yes. Attach it to a fence frame using screws and washers or staples. MLV is weatherproof and UV-stable, so it holds up outdoors. It will not replace a purpose-built sound wall but provides meaningful reduction for residential use. Q: What is the difference between 1lb and 2lb MLV? Which one should I buy? 1lb per sf is right for most home and studio applications: apartment walls, ceilings, car interiors, pipes, and home theaters. 2lb per sf is for situations where maximum mass is needed, such as commercial walls, or industrial machinery enclosures. Is this made in the USA? Yes. This product is manufactured in the United States by TrademarkSoundproofing. Domestic manufacturing allows tighter quality control over material density and purity, which is why we can make sure consistent throughout the entire roll

Material: Vinyl

Brand: Trademark Soundproofing

Item Thickness: 3.18 millimeters

Product Dimensions: 48"L x 48"W

Manufacturer: Trademark Soundproofing

Brand Name: Trademark Soundproofing

Manufacturer: Trademark Soundproofing

UPC: 608729732228

Unit Count: 25 Count

Included Components: MASS LOADED VINYL

Item Weight: 100 pounds

Model Number: 4334435662

Manufacturer Part Number: 4334435662

Item Thickness: 3.18 millimeters

Item Dimensions L x W: 48"L x 48"W

Coverage: 100 square feet

Material Type: Vinyl