GreatCircleUSA Wood Chipper Shredder Mulcher Heavy Duty Gas Powered 3 in 1 Multi-Function 3" Inch Max Wood Diameter Capacity EPA/CARB Certified Aids in Fire Prevention - Building a Firebreak
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
Non-returnable item
Learn more
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Sep 2
Recently Viewed
Features
- MULTI-FUNCTION CAPABILITY - This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching. professional design w/ CR12MoV cutting blades.
- POWERFUL - This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity. Max speed: 3600RPM,Max torque: 9.14ft-lbs@2500RPM
- EFFICIENT DESIGN - Hookup your favorite: ATV, lawn mower or small tractor, for easy transportation with a Tow Bar Kit (SOLD SEPARATELY) and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (SOLD SEPARATELY)
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
- BEST APPLICATION - Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines
Specs & Other Info
| Specification | Details |
|---|---|
| Brand | G |
| Engine Capacity | 212 CC |
| Environmental Certification | EPA and CARB Approved |
| Dimensions | 30"L x 24.1"W x 41.6"H |
| Color | Red |
| Sound Level | 104 dB |
| Energy Source | Gasoline |
| Control Type | App-Controlled |
| Inverter | Not Included |
| Setup Mode | Split System Installation |
| Weight | 124.7 lbs |
| Manufacturer | Intradin (Shanghai) China Ltd Co |
| Model Number | LCE01 |
| Continuation Status | Currently in Production |
Frequently asked questions
The GreatCircleUSA Wood Chipper is designed to chip, shred, and mulch various types of yard debris including branches, twigs, and leaves. It can handle wood materials up to 3 inches in diameter, making it versatile for different yard cleanup tasks.
Yes, the GreatCircleUSA Wood Chipper is both EPA and CARB certified. This means it meets the environmental standards set by the Environmental Protection Agency (EPA) and the California Air Resources Board (CARB), ensuring it operates efficiently with minimal environmental impact.
Absolutely, the GreatCircleUSA Wood Chipper can significantly aid in fire prevention by creating firebreaks. By chipping, shredding, and mulching excess yard debris, it reduces the amount of potential fuel for fires, thus helping to create barriers that can slow or stop the spread of wildfires.
Regular maintenance for the GreatCircleUSA Wood Chipper includes checking and changing the oil, inspecting and sharpening the blades, cleaning the air filter, and ensuring all bolts and nuts are tightened. Always refer to the user manual for detailed maintenance procedures to keep the chipper in optimal working condition.
Similar Products
Top Amazon Reviews
🚀 Abunda's Overview
This is our summary and key points to consider based on customer reviews.
The Great Circle Chipper Shredder is celebrated for its sturdy construction, efficient processing of branches up to 3 inches in diameter, and effective mulching capabilities. Users appreciate its easy-start engine and the strategies shared for maximizing its use, such as building a box for direct chipping to avoid frequent bag emptying. However, concerns were raised about shipping damage and assembly issues, including missing parts and potential quality control problems.
Pros
- 🛠 Sturdy build quality and solid engine performance.
- 🌿 Efficient at chipping and mulching, able to handle up to 3-inch thick branches.
- 🔧 Includes an easy engine off switch and generally starts easily.
- 🛠 Creative solutions suggested by users, like building a box to collect chips for extended use.
Cons
- 🚚 Reports of shipping damage raising concerns about packaging adequacy.
- 🛠 Some assembly difficulties, including missing parts and unclear instructions.
- 🔊 Engine noise levels can be high, requiring ear protection.
- 👜 Bag design could be improved for ease of attachment and larger capacity.
Should I Buy It?
If you're seeking a reliable and efficient chipper shredder for home garden use, this product offers solid performance and useful features. Be prepared for potential shipping and assembly challenges, but the machine's functionality for chipping and mulching tasks, as shared by satisfied users, makes it a worthwhile investment for those in need of a heavy-duty garden tool.
We've had it about a week. It took about an 1 1/2 hrs to assemble. I'd watched videos online so it wasn't that hard. Might have been faster if I hadn't been watching a movie at the same time. After gas and oil, it started right up on the first pull. First use was a pile of branches that was over a year old, so pretty dry and they shredded easily. About the worst thing I can say about it is the output - it really could use a longer output thingy. Oh, be careful with the "3 inch" rule. And remember that "3 inch" means the absolute widest part of anything going in the chute. Anything over 1 inch should go in the chute. 1 inch and under will work best in the big hopper.
...
show more
Reviewed in the United States on July 19, 2025 by GMA559
Given the very high rating from my fellow purchasers, I had high hopes when I made the purchase of the Great Circle Chipper Shredder. I was particularly pleased when the package arrived a day early. My enthusiasm was quickly dampened, however, upon inspecting the box and even more so when I started to unpack and eventually assemble the device. Here is my story in the order of my disappointments: SHIPPING PROBLEMS 1. The package was delivered by UPS. It doesn’t look like they were particularly careful in shipping as the box was canted in the truck and the driver complained about the weight (130#). He had no dolly nor automated lift so I offered, and he accepted, my help in carrying the box to my garage. When I opened the cardboard box I found that several of the wood packing slats had broken, the chipper had broken free from its restraints, and there was visible cosmetic damage to the unit. 2. The shredder hopper had several dents and one corner was dinged pretty badly with a shard of steel protruding from the side of the hopper. Presumably this is related to the shipping. 3. There was packing material (wood and plastic wrap) jammed inside or bolted into the exhaust manifold. It wasn’t clear that this was related to the shipping. Perhaps when the unit was packed this occurred. There is no way to tell for certain. PRODUCT PROBLEMS 4. There was a steel bracket suspended from the air intake filter box but attached to nothing else. The other end was near the oil plug so I even tried removing the plug to see if I could make the bracket connect there. It didn’t fit. Why is this engine only partially assembled? To leave this bracket in place, it will only rattle and possibly cause damage. It serves no functional purpose in its current configuration. 5. The assembly kit was short one nut. The chipper cone was to be attached to the chipper body, but there were only two nuts on the three threaded studs. I looked everywhere for the final nut, but was unable to find it. 6. One of my biggest surprises was the fact that the axle on one side didn’t even have a cotter pin hole. How exactly am I supposed to attach the second wheel? How does something like that get overlooked? This, along with the other complaints above, really make me question the quality and workmanship of this product. At this point, I can’t speak about the performance of the unit. I’m afraid to start it without first talking to the manufacturer. I also fear that should it start, the second wheel may fall off (not secured) and create new problems or void any warranty. I also want to remove the wood and plastic packing materials stuck in the engine manifold after talking to Great Circle. Assuming that I can edit this review, I’ll report back after talking to Great Circle tomorrow. For now, I’m sorry to report, buyer beware! UPDATE (Tuesday, 6/26/2018): I spoke with Great Circle today. They said that they are going to send a replacement unit and it should arrive in the next 5 days. Will update you and the review when chipper #2 shows up... UPDATE (Tuesday, 7/3/2018): As promised, Great Circle shipped a replacement unit and it arrived a day early. There was still extensive damage to the packaging and minor damage to the product. I maintain that their shipping protection is substandard given the weight of the chipper. As others before me have found, the air filter was damaged and I ended up duct taping it which worked adequately. The reason for the bump up from 1-star to 4-stars is related in part to the amazing customer service in which they shipped a replacement right away. The other reason is the performance of the product. I gave the chipper its maiden voyage today and it worked like a charm. It was pretty simple to get it started and it ripped through the branches and brush pretty readily. The resulting chips/mulch was much finer than I expected, and I suspect that will make it perform better where I placed it on bare soil. The large branch feeder (<3") worked best, though the branches had to be pretty straight to fit. The small branch hopper (<1/2") was more difficult to feed and it sometimes took a bit of work to get the blades to engage with the branches and pull them into the chipper. All-in-all, I'm happy with the purchase and, once again, tip my hat to Myesha and the Customer Service Team for addressing my situation so promptly.
...
show more
Reviewed in the United States on June 26, 2018 by Rick
This chipper will do the advertised 3 inch wood branch however you must feed it in small increments or it will bog the engine down so much that it will stall. This is typical with all home level chippers which I have owned so I am not bothered by this. I am sure you can spend thousands for one that will not bog down but that not in my budget for this project, The engine is pretty easy to start. I managed to clog it by getting overzealous feeding tree branches from my acres. It was easy enough to unclog. I would caution against using any woody branches in the shredder portion however as the woody stem is likely to wrap around the shredder and cause clogging. Only put leaves in the shredding part. That is OK though because the chipper part literally sucks in woody evergreen branches needles and all and spits out a nice pile of mulch. I have used this for three hours straight and so far it has taken all I can throw at it. I have raw forest land in Easter Washington and the Grand Fir put up the most fight. If you have ever chipped the branches of a Grand Fir, you know what I am taking about. It seems the tree sprouts its needling branches all from the same point on the stem making a knot that can exceed 3 inches if not carefully trimmed down before chipping. Sometimes, pushing it in with force squeezes it enough that once those chipping blades hit it the resistance is futile as they say. I ditched the bag because It filled so fast I would be all day constantly emptying it. It seems really small. Instead I have been chipping without the bag directly onto the dirt road using the chipped material to keep dust down. I feel in this application for which I have purposed this chipper, it is definitely punching above its weight,
...
show more
Reviewed in the United States on August 8, 2021 by Mark Twain
Homeowner and no commercial use! I purchased this with high hopes. At first, it seemed to work okay with small branches and twigs. But, placing them into the funnel often led to jams and the cutter blade seemed to dull quickly. This forced you to push the branch in manually and often times it would grab the branch and give you a painful hit as it grabbed on. Emptying the bag is a chore. Remove the clip from the bar the bag rests on, then remove the two screws and string that holds the bag to the machine. Very time consuming. to remove and reattach the bag. The bag quickly developed holes in it. If the blades did a better job of shredding, you most likely would not get longer twigs poking through and ripping holes. Emptying the bag is a two handed proposition as the debris is tightly packed and won't fall out when you open the zipper. One hand holding the bag and one hand digging in the mess to pull it out. The pictures show the poor stitching quality and rip at the screw hole. Now for leaves. I waited for my leaves to be dry so they would be easier to shred. Waste of time. Same as with the twigs. Packed in and two-hands to empty. The leaves didn't appear to be shredded and looked like they just shot through the machine. I should have just raked them into a bag. My old Toro electric does a better job. For the price, the engine seemed to work fine and started every time. It is very loud so you will need ear plugs and over the ears protection as well. The protective piece of plastic from the top loader guard blew off after the first use. The bolt came flying up out of the hopper and into the air. Appears to be from one of the cutters but, I haven't had a chance to take it apart yet to see. The machine would have been ideal for a homeowner with a a decent sized yard for fall cleanup. The concept is good...the execution is poor due to the cost-saving measure of utilizing low quality parts. Save your money.
...
show more
Reviewed in the United States on October 29, 2021 by Amazon Customer
We purhased this a year ago and have used it almost every month. We have alot of woods at our home that we have been trimming and cleaning up. This wood chipper works amazingly. In the past we had rented a wood chipper and we always had issues so we decided to purchase one. After doing some research we purchased the Great Circle chipper/shredder and have been very pleased with its performance. As I said we use it often and during this process some of the screws had loosened. I contacted Great Circle for the parts. Their customer service were egarbto access me with the parts we needed to get our chipper up and going again. 2 thumbs up.
...
show more
Reviewed in the United States on June 1, 2026 by Vickie Mundie
So when I placed the order, it was for a GreatCircle, 212cc, 7hp, 3 in 1 Chipper/Shredder/Mulcher. What actually arrived was the same item with the Landworks logo. Some quick digging revealed that it's all the same company and my assumption is that it's the same item, just painted a different color. But some updates to the listing wouldn't hurt to make this clear. The box arrived and looks like it had been through the wringer. Opening up the box and pulling it out I only noticed one dent at the corner of the hopper. Assembly was easy with 10mm and 13mm bolts, took less than 15 minutes from the time I had it out of the box until it was fueled, oiled, and ready to go. Starting it was easy, and feeding this thing trees and brush it's clear it can handle up to the 3" thick limbs that it advertises. It's a great chipper, though I haven't started using the mulching side yet. The real problem arose after about 30 minutes of use. I noticed that there was fuel leaking on the ground, so I shut it down and took a look. The cover for the air cleaner presses against the fuel lines leading to and from the shut-off valve. The vibrations of the machine over 30 minutes had cut through the fuel line. I solved this by taking a rotary tool and removing two small circular indentations where the fuel lines pass. Not enough removed to interfere with the seal, but enough to give about 1/16" clearance between the cleaner cover and the fuel line. I have contacted GreatCircle to see if they will send me a replacement fuel line, and will update this review according to how their customer service responds. Overall this is a good machine, I just don't understand how there can be this kind of a design flaw on their engine. Since it's labeled as an AlphaWorks engine, it's their in-house brand, and I assume they use the same engine on other products. I only hope their customer service doesn't make this a 1-star product.
...
show more
Reviewed in the United States on July 7, 2021 by Aero Eng
This is a well built, solid machine with a strong engine, good design for chipping and mulching, and it does handle up to 3" as advertised. That said, it took me several days to get the hang of it-- Engine: 1. Others say there is no easy way to turn the engine off, but my machine came with a switch that does kill the engine. 2. The engine is moderately loud so if you have good hearing, wear ear plugs. If you wear hearing aids (like me), take them out. The engine is considerably LOUDER if you have the top hopper open. I recommend you close it except when you need to use the hopper or you want to "blow out" the bag. More on that later. 3. Starts easily, but if the engine is cold (this is the first time you are running it today) set choke ON and speed LOW and pull the cord. If engine is warm already, you can skip the choke. After a couple seconds, set choke OFF and increase speed to desired level. DO NOT LEAVE THE SPEED AT LOW. The engine is not happy at low speed. That said, maximum speed is not required. I prefer a little lower speed so there is a little less vibration when pushing branches into the chute. Bag: 1. Others say the bag is too small and difficult to attach and I agree. The bag fits around a rectangular port and they provide two knob-screws to secure it, but you must be sure the bottom of the bag opening is going over the metal protrusion and also you must cinch the drawstring tight and use a decent clip to hold it. I used these clips: "DYZD Plastic Cord Locks End Spring Stop Toggle Stoppers Multi-Colour" which cost $6 for a set of 10. You only need one, so you have 9 more for other uses. 2. If you are using the bag and the some stuff gets stuck at the front of the bag, you'll notice a change in sound as the machine bogs down and you'll see chips/mulch going sideways instead of in the bag. Usually when this happens, you can simply open the top hopper slider for a couple seconds. When you open the hopper, the machine becomes a strong blower and this can often clear any blockage going into the bag. If that doesn't work, lift the bag off the ground and shake a little. Worst case, remove the bag and clear the blockage directly. 3. After a couple days of use, I got tired of constantly starting/stopping the chipper to empty the bag, so I built a box! See picture. Now I run for over an hour before I have to stop and empty the box with a shovel :) It never gets clogged and the machine never bogs down. Chipper Chute: 1. True to advertising, it will handle wood up to 3" in diameter as long as its straight enough to fit down the intake tube, but I find it more efficient to cut/saw anything over 2" into 18" lengths and stack it, then run an ad in craigslist for "free wood" when the stack gets big. People come immediately. 2. Keep in mind you will need to pre-process most limbs and branches before you feed them into the machine. Any branches too large to bend parallel with the limb will need to be cut off first. Crooked limbs will need to be cut into sections small enough to feed into the intake tube. I got some "Fiskars 32-Inch PowerGear Bypass Lopper" for $5. They have a decent lever design so it's easy to cut anything up to 2". Pretty amazing. Of course, if the side-branches are very small, you can use normal clippers or just tear them off with your hands. 3. NOTE: The chipper chute leads to sharp metal blades that look like a beard razer blade. They can get dull and need to be replaced. I've used the machine around 10 hours / 4 gallons of gas and the blades are still OK, but I see GreatCircleUSA sells the replacements for $25 on amazon. Top hopper: 1. The top hopper is for leaves and small twigs. However, if you put a large amount all at once, they might not fall in, so you'll need to shove them down with a medium-size stick/branch. I typically just nudge once side down to get them started. The machine likes to grab them all at once and pull them in, so I don't recommend putting things like ivy into the hopper unless you have already cut it into short lengths. 2. NOTE: The top hopper leads to large free-spinning metal whackers with a similar design as a garbage disposal. These are not sharp and probably never need to be replaced, but if you accidentally put a rock in here, those whackers will take a serious beating before the rock finally falls into the bottom well or gets kicked out. If you hear a rock banging around in there, stop the machine, remove the 6 bolts to remove the hopper assembly, and extract the rock with some grabbers. Also, if you put branches in here or dense ivy or other things that can get tangled up in there, it can wedge the machine and stop it. Again, you'll have to remove the 6 bolts to remove the hopper assembly and clear it. FINAL NOTES: 1. Use a chair! Otherwise, you are constantly stooping over to push things into the chute, and your back will hurt. I like to pile things up and then feed the machine from my chair. See picture. 2. Wear gloves! The machine grabs most branches and pulls them in, but if the branch has leaves or bends you will have to shove it, and it will be vibrating like crazy. 3. It paid for itself quickly, as it costs $400 to rent a chipper for a week and I have used it for 6 weeks. The build quality is solid and it will last for many years.
...
show more
Reviewed in the United States on August 3, 2021 by Retro Piano Guy
I read review after review before settling on the GreatCircleUSA Wood Chipper Shredder/Mulcher. I easily put a full week (and no, I don't mean off and on during a week; I mean I easily put 168+ hours) into researching wood chippers/shredders/mulchers. I quickly learned that these things went up in price a lot since last year. But, I have 8+ neglected pines (ranging from 40 to 80 feet high) in the back yard and a 40' tall Japanese Maple in the front yard that need a lot of dead wood removed. Renting wasn't an option at $100-$150/day... neither was spending $1000+. My neighbor had a TAZZ K32, which he was kind enough to let me use to chip a 40' tall Japanese Maple in my backyard last year. I didn't want to abuse our friendship by asking to borrow it yet again. Based on his machine, my wants were simple -- min 3" intake; min 7HP 212CC engine (another 'handy' brand I seriously considered touted a 212CC engine... dig further into the engine maker. It isn't 212CCs); 3600 RPM unloaded speed, min; both gas-line shutoff and on/off switch; throttle lever (I don't want the chipper running at full speed all the time); mulching hopper with slide guard and vacuum port on back (JIC); an included chip catcher bag with strap (I wanted an attached pole to keep the bag aligned with the chute, but not a necessity); and, air-filled wheels (not solid, hard rubber or plastic). The GreatCircleUSA met most of my needs and will likely meet yours (if you're realistic). Please read on. Pros: Packaging was amazing. I was worried after reading all the reviews. Something must've changed... because they really went above and beyond in packaging -- including thick Styrofoam, wood framing around the hopper, everything wrapped in plastic, and a nice, thick rubber mat to protect the hopper and engine that I'm sure I'll find a use for). Install wasn't awful (but, please see Cons)... patience is definitely a virtue (as is having the right tools). The machine met most (but not all) of my wants (to save you read time, I won't rehash them). Startup was easy. Add gas (making sure you also added oil to the oil fill, and do not add oil in the gas). Cold start... turn on the gas line switch, move throttle to mid, turn choke level to run, move the On/Off switch to On, pull starter cord 3/4 of the way out, let it run a little to warm up, move throttle to full. The machine spun up easily (and I love that it has an On/Off switch... and a fuel line cut off to clear gas out of the carb). Warm start, turn everything to On, move throttle to run, and pull the starter... easy as pie. Started the first time, every time. Re: the engine... it's stroooong. I fed everything up to a three inch, green pine and seasoned dogwood limbs into this thing. It chewed through 2.5 inches and below without a hiccup. At the 3" mark, I had to feed the limbs about 6", back off (allowing the chipper wheel to speed up to max), feed it, back off, repeat. It probably could've taken the full limb length, but not without dying in the middle or toward the end. I have a fire pit. 3" and more is burn wood. So, I won't be feeding many 3 incher's in the chipper. I tried the 3" just to test it for this review - and it worked just fine (as long as you're reasonable with your feed). This machine made short work of a pile behind my shed that was easily 10'x5'x4'. My wife literally said to me that she couldn't believe how fast I went through the pile. Yes, I had to process some of the limbs to allow them to fit in the chute; but, it was expected. Short of a few larger clipped limbs that needed chute-fed, the hopper made the rest of the disposal easy. Remember, the hopper is only for twigs and small brush. Be reasonable with your feed and it works fine. Re folks stating that the limbs vibrate your hands like crazy... umm, yeah... shredding involves pushing a limb onto a spinning surface with knives that chip away at the limb. Get some work gloves (and a push stick to keep your hands away from spinning knives) put your big boy/girl pants on, and go to town (safely, of course). There's gonna be some vibration, even more the closer you get to the end of a limb (completely normal and understandable).For how strong it is, the machine is surprisingly quiet. No... obviously not whisper quiet (use hearing, hand, and eye protection, BTW). But, my wife even said, compared to my neighbor's TAZZ, this chipper is much quieter. The body is strong too, as are the j-hammers and knives. I checked each before full assembly... all were sharp and ready to go. the rubber protectors over the hopper and intake are nice (especially the intake, which, like most chippers, tends to bounce the last bit of limb around in the intake for a little). By comparison, my buddy's TAZZ shoots the limb nubs out of his intake (kind of dangerous actually). The chip catcher bag is also great. Other reviewers mentioned that the bag is made us substandard materials. I'm here to say that it isn't. The bag is well constructed of a thick, adequately-ventilated material with reinforced stitching on the loops and zipper. Shredded material moved to the back of the bag easily. The zipper is built equally well, no snags or tears. Emptying was a snap. I was impressed. I even overloaded the bag once and it held up (but, please see Cons). FWIW, the mulch chippings were consistently about 1/2"x1/2". Finally, the machine came with a good bit of documentation and a serviceable spark plug puller (gapping recommendations in doc), in case you don't have one on hand. Cons: I thought the wheels were air-filled rubber. They aren't. They're hard, air-filled plastic (don't get me wrong; they're durable and will likely do the job for some time... but you can't fill them with air and they aren't soft rubber, which makes the execution feel cheaper than it should at this price point). At least they're easily replaceable (set on cotter pins) if need be. Next, the chain holding the intake chute cover came off when I pulled the cover off to use the chute. Meh execution, but not a deal breaker. I fixed it in no time with some needle-nosed pliers. Next, the bag, which sells on AMZ for $75 on its own, should have a cincher on the strap. I knew what to expect based on another reviewer. Although you can easily create a slipknot in the bag tie that will keep the bag on the shredder while in use, get this cord cincher (https://www.amazon.com/gp/product/B01FH9DYU6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1). It keeps the bag on nice and tight and makes shredding life oh so much easier. Finally, the assembly instructions are sufficient, but barely. Thank the powers that be there are pics. But, the instructions don't clearly label which bolts need installed where (GreatCircle USA needs to add an included items key and use that key in the installation instructions). General: The body and engine are made in China. Best I can tell, the engine is a Chongqing RATO Holding Group 210S (snowblower engine) with the electric starter removed. FWIW, RATO engines are generally rated well... like all things, depending on user care and use. GreatCircleUSA's return policy is 30 days (from the date of your purchase). It took a week to get to me in Pennsylvania, from Canada. So, take that into consideration. Warranty support is a 3-year limited from the date of purchase (customer pays return shipping). I haven't needed it yet. So, I can't speak to it. Next, yes, the oil fill (there are two ports) is difficult to fill. I filled mine before installing the chute. However, this is typical for shredders. Get one of these (https://www.amazon.com/Hopkins-10704-FloTool-Spill-Measu-Funnel/dp/B000EH4V0Y/ref=sr_1_8?dchild=1&keywords=oil+spill+saver&qid=1592855394&sr=8-8) off Amazon. I had one on hand; it works great to control oil flow and lessen spillage. Next, the bag did not come with a bag bar. I knew this going into the purchase (confirmed by no welds appearing on the chipper body in the AMZ pic) and can't complain (although the instructions actually show a bag bar in Figure 7... really!?, hoseteasers!). TAZZ makes a retro-fit kit for their machines, but I don't know if it will fit the GreatCircleUSA shredder. To that end (as seen in the pics), I used a metal painter's pole wedged under the extended hopper guard. I used this setup for three hours. It didn't fail once. If the setup does end up failing, I'll get metal hanger straps or cable clamps and secure the pole to the hopper using the built-in hopper bolts (do this only at your own risk, and very carefully so as not to obstruct the hopper or cause the hopper bolts not to have enough 'bite' and come loose during operation). For now, the paint bar worked. Next, not a big deal, but the engine oil instructions could be confusing for some. One manual says to use 4-Stroke 10W-30 for 32 Degrees and up; 5W-30 for 25 and below. The engine manual says that's fine but recommends 4-Stroke 15W-40 for -10 Degrees to +85 Degrees. I only plan on using this in Pennsylvania in the Spring, Summer, and Fall and had 4-Stroke 10W laying around and used that with no problem. Finally, one reviewer mentioned the product coming with safety glasses, a packet of engine oil, and a funnel... I didn't get those (possibly mixed up their product reviews?) Recommended Purchase?: With the above in mind, yes. I know I have to change the oil again for the next use (break-in period); but, this thing is a beast... as long as you use it as intended and are reasonable with what you feed it and how you care for it. For my part, I don't regret this purchase one bit and really enjoy shredding and chipping with this machine. If I have a reason to change my review, I'll do so. 'Til then, happy (and safe/responsible) shredding. :)
...
show more
Reviewed in the United States on June 22, 2020 by Gene D.