OBD OBD2 to USB-A Port Power Cable for Dash Camera 24 Hours Surveillance Acc Mode with Switch Button 3Pin OBDII Adapter Hardwire Charger Cable 12-26V to 5V 2.5A 3.5 Meter
Buy Now, Pay Later
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Recently Viewed
Features
- Low Voltage Protection: OBD2 dash cam power cable with built-in intelligent program control chip that accurately detects car battery voltage and converts constant 12V/24V voltage to 5V. When the battery voltage drops below 11.6V, it stops working to prevent the battery from wasting power
- Dual Mode Operation with Switch Button: Surveillance mode enables 24-hour parking monitoring. ACC mode powers off the OBD hardwire kit after 5 minutes when car turns off. The ACC function works by detecting the car voltage, with a detection standard of 13V (minimum 12.8V) during the 5-minute window after engine shutdown
- Mode 1 Surveillance: Press the red button switch to MODE - position. At this mode your dash cam will keep recording 24 hours regardless of whether your car is turned on or off for parking monitor applications
- Mode 2 ACC Operation: Press the red button switch to MODE O position. This is ACC mode where your dash camera will turn on and off automatically when your car turns on and off
- Mode Switching Instructions: When switching between mode 1 and mode 2, the OBD adapter must be unplugged and reinserted once, otherwise the mode switching will not work. Specific steps: Pull out the ODB adapter, switch to the desired mode, then reinsert the OBD adapter
- Plug and Play Installation: Dash cam power cable OBD2 cable makes 24-hour monitoring easier with no wiring or fuse operations required, more convenient than traditional dash cam hardwire kits. Directly connects the OBD port with the dash car camera
- Universal Compatibility: Features 3.5 meter (11.5 ft) extension cable with USB-A port output providing 5V/2.5A power. Input voltage range of 12-26V accommodates both 12V and 24V vehicle systems for wide compatibility
Description
Special reminder: 【 MODE Switching 】 When switching between 【mode 1】 and 【mode 2】, the OBD adapter must be unplugged and reinserted once, otherwise the mode switching will not working. Specific steps: 1. Pull out the ODB adapter. 2. Switch to the mode that you want. 3. Reinsert the OBD adapter Spec: ACC mode Input: 13V-36V | Output: 5V/2.5A Surveillance mode Input: 11.6V-36V | Output: 5V/2.5A Extension cable: 3.5meter (11.5 ft) length Interface: USB-C Working Mode: Mode “O”: ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes. Mode “— ”: Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds. The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving. Attention: 1.If you leave your car for many days no driving without surveillance purpose, we suggest you to set the working mode in ACC mode “O”.Cars battery will run out day by day because your dashcamera are consuming power all the time in surveillance mode “-”. 2.From our clients feedback,the cable work well with most of the European cars, but DON NOT with most Chevy or GM vehicles,and some Japanese models,as these vehicles may use different OBD definitions,it may cause your dashboard warnings,please see our incompatible list in last photo. 3.Our OBD2 definition is " pin4 for ground, pin5 for signal,pin16 for power supply".
Brand: EnruigeOK
Connector Type: OBD MALE, USB Type A
Cable Type: OBD Power Cable
Compatible Devices: Dash Camera
Special Feature: Low Voltage Protection
Connector Type: OBD MALE, USB Type A
Cable Type: OBD Power Cable
Compatible Devices: Dash Camera
Other Special Features of the Product: Low Voltage Protection
Compatible Phone Models: No Compatible Phone Models
Connector Gender: Male-to-Male
Number of Pins: 7
Maximum Current: 2.5 A
Wattage: 87.5 watts
Maximum Voltage: 26 volts
Recommended Uses For Product: powering dash cameras in cars, providing a powering solution with smart switch for dash cameras in cars
Specification Met: CE, RoHS
Indoor Outdoor Usage: Indoor, Outdoor
Color: Black
Item Shape: Round
Brand Name: EnruigeOK
Customer Package Type: coiled in protective tubing
Model: ERG-USB
Item Length: 3.5 meters
Manufacturer: Enruige
UPC: 768587466649
Part Number: ERG-USB
Unit Count: 1 Count
Number of Items: 1
Outer Material: plastic or rubber
Frequently asked questions
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
