BOSS Audio Systems B12ES 12 Inch Car Subwoofer, 1200 Watts, Built-in Amp

Features

• Poly Injection Cone
• Rubber Surround
• High Performance Voice Coil
• RCA & Speaker Level Inputs
• Phase Control
• Bass Boost
• Low Pass Filter
• MDF Sealed Enclosure
• Remote Subwoofer Control
• Thermal, Short and Overload Protection Circuits
• Built in Amplifier Class A/B Topology
• 16 ft. (4.88 m) Remote Subwoofer Control Cable
• Power & Protection LEDs
• Max Power: 1200 High Output
• Nominal Impedance: 4

Description

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance. Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder. Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency. Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output. High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units. This comes in handy if you are installing your subwoofer with the magnet facing out. Reverses the polarity (Positive/Negative) on your subwoofer terminals to reverse the direction of the low frequency BOOM that you are used to hearing. Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer. The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Brand: BOSS Audio Systems

Speaker Maximum Output Power: 600 watts

Connectivity Technology: RCA

Audio Output Mode: Mono

Input Voltage: 12 volts

Audio Output Mode: Mono

Mounting Type: Car Mount

Enclosure Material: Mdf, Plastic

Speaker Type: Subwoofer

Additional Features: Amplifier

Antenna Location: car

Subwoofer Diameter: 12 inches

Color: Black

Is Waterproof: FALSE

Warranty Type: Limited

Control Method: Remote

Speaker Size: 12 inches

Woofer Diameter: 12 inches

Water Resistance Level: Not Water Resistant

Specific Uses For Product: Small vehicles, long vehicle interiors

Controller Type: Remote Control

Processor Count: 1

Number of Audio Channels: 3

Impedance: 4 ohm

Signal-to-Noise Ratio: 75 db

Compatible Devices: Smartphone, Tablet, MP3 Player

Compatible with Vehicle Type: Car

Power Source: Corded Electric

Brand: BOSS Audio Systems

Model Number: B12ES

Model Name: B12ES

Built-In Media: 1 x Speaker, 1 x Remote Control, 1 x 16 ft Cable

Number of Items: 1

UPC: 791489132510

Global Trade Identification Number: 10

Manufacturer: BOSS Audio Systems

Age Range Description: All ages

Speaker Maximum Output Power: 600 watts

Input Voltage: 12 volts

Number of Power Levels: 1

Unit Count: 1 Count

Item Weight: 25.9 pounds

Connectivity Technology: RCA

Wireless Technology: No Wireless Communication Technology

Subwoofer Connectivity Technology: Wired

Connectivity Protocol: RCA

Audio Driver Type: Dynamic Driver

Audio Driver Size: 12 inches

Number Of Circuits: 1