Autel Original OBD2 Main Test Cable, 5.6ft 1.7M, 16 Pin OBDII Diagnostic Test Cable, Work with Scanner MK808 MK808S MK808Z MX808 MX808S MP808 MP808S MP808K DS708 DS808 MS906 MS908, IM508 IM508S

Features

• Conta.ct us for Support DirectlyFor any issues experienced after purchase, please reach out to: auteldirect@ outlook. com. Our team will provide perfect solution for you. For tech support or [explore additional accessory], please cont.act our team: auteldirect@ outlook. com.
• Compatible Autel Wired ScannersThis Autel Original OBD II diagnostic test cable is compatible with specific Autel wired scanner. Such as MK808 MK808S MK808Z MX808 MX808S MP808 MP808S MP808K DS708 DS808 DS808K MS905 MS906 MS908, IM508 IM508S IM508 PRO. This is just a OBD diagnostic cable, please check whether this cable is compatible with your scanner.
• Incompatible Models1.Note: NOT compatible with All Autel Handheld scanners, such as MS309 AL519 AL619 ML519 ML629 TS408 TS501 TS508 etc. 2. NOT suitable for Autel Ultra Ultra EV Ultra Lite MS919 MS909 Elite II PRO Elite II Elite MS908S PRO II MK908 PRO II MS908CV II MS908CV IM608 PRO II IM608S II IM608 IM608S. (NOT compatible with Autel 5in1 VCMI/ 6in1 VCMI2 & J2534). 3. NOT compatible for TopDo.n Air.diag pro. If your scanners are above models, please dont purchase.
• 2026 Autel 16 Pin OBD2 Main Test CableThis Autel Original main OBD2 cable is designed for connecting Autel Scanner and your vehicles to perform data transmission. This Autel OBD 2 OBDII Main Test cable can work with Autel wired 808 series OBD II scanner like Autel MK808 MK808S MK808Z MX808 MX808S MP808 MP808S MP808K DS708 DS808 DS808K MS905 MS906 MS908, IM508 IM508S IM508 PRO. 5.6ft/1.7m Ultra-long OBD2 test cable makes repair more convenience, No more hunching over the steering wheel to repair your car.
• Extra-long 5.6FT Length, Interface DetailsYou no longer have to be tied to the steering wheel by the 3.3ft/ 1-meter OBD diagnostic cable. The extra-long 5.6-ft OBD II test cable gives you more room to move around and allows you to diagnose outside the vehicle. One end of the OBD 2 main test cable is dual-row 15-pin OBD port, which is used to connect to Autel scanner; the other end is a conventional OBD 16-pin port, which is connected to the vehicles ODBII port (DLC).
• Easy to Use, Plug and PlayIt only takes two steps to connect easily. Step 1: Plug the 16pin connector into the car DLC; Step 2: Plug the 15pin port into the scanner and tighten the screws on both sides. Compared with wireless scanners, wired connection is more convenient, ensuring 100% stable connection and will not be disconnected due to Blueto.oth failu.re. After connected well, you can do massive functions from diagnose, co.ding to progra.mming. Such as get ECU information, read/ erase code, freeze frame and active test, ECU prog.ramming & coding etc.
• Stable Data TransmissionCompa.red with wireless connection, wired data transmission is the most classic and stable connection method at present. It is not affected by fac.tors such as weather and interference, and is faster, more stable, has higher confidentiality. Choose Autel OBD II Main test cable is your best choice.
• Warm Remin.derThis OBD II main test line is not suitable for FCA related vehicles (Chrysler, Dodge, Jeep, Fiat and Alfa vehicles). If you need to diagnose above vehicles, please choose Chrysler 12+8 cable, you can also consu-lt our technical team: auteldirect @outlook. com get Chrysler 12+8 cable.

Brand: Autel

Connector Type: Any Issues Reach Us

Cable Type: Only Work with Autel Scanner MK808 MK808S MK808Z MX808 MX808S MP808 MP808S MP808K DS708 DS808 DS808K MS905 MS906 MS908, IM508 IM508S IM508 PRO See more

Compatible Devices: Compatible with Autel MK808S/ MK808/ MK808Z, Autel MaxiCheck MX808/ MX808S, Autel MaxiPRO MP808/ MP808K/ MP808S, Autel MaxiDAS DS708/ DS808/ DS808K, MS906, IM508/ IM508S/ IM508PRO See more

Special Feature: Conta.ct us via auteldirect @outlook. com get Tech & After-servi.ce support.

Brand: ‎Autel

Connector Type: ‎Any Issues Reach Us

Cable Type: ‎Only Work with Autel Scanner MK808 MK808S MK808Z MX808 MX808S MP808 MP808S MP808K DS708 DS808 DS808K MS905 MS906 MS908, IM508 IM508S IM508 PRO

Compatible Devices: ‎Compatible with Autel MK808S/ MK808/ MK808Z, Autel MaxiCheck MX808/ MX808S, Autel MaxiPRO MP808/ MP808K/ MP808S, Autel MaxiDAS DS708/ DS808/ DS808K, MS906, IM508/ IM508S/ IM508PRO

Special Feature: ‎Conta.ct us via auteldirect @outlook. com get Tech & After-servi.ce support.

Compatible Phone Models: ‎No Compatible Phone Models

Recommended Uses For Product: ‎Compatible with Autel MK808S/ MK808/ MK808Z, Autel MaxiCheck MX808/ MX808S, Autel MaxiPRO MP808/ MP808K/ MP808S, Autel MaxiDAS DS708/ DS808/ DS808K, MS906, IM508/ IM508S/ IM508PRO

Color: ‎Black

Connector Gender: ‎Male-to-Female

Shape: ‎Round

Number of Pins: ‎16

Unit Count: ‎5.6 Feet

Model Name: ‎Newest OBD2 Main Test Cable

Indoor/Outdoor Usage: ‎Indoor, Outdoor

Number of Items: ‎1

Customer Package Type: ‎sealed anti-static bag or rigid box

Maximum Voltage: ‎12 Volts (DC)

Manufacturer: ‎Autel

UPC: ‎849438083403

Package Dimensions: ‎7.44 x 6.57 x 0.63 inches

Item Weight: ‎10.2 ounces

Item model number: ‎Main Test Cable-New

Date First Available: ‎April 25, 2024