Autel MaxiBAS BT608 (E) Car Battery Tester, Full Systems as MK808S MX808S

Features

• 2026 NEWEST BATTERY TESTERAs the upgraded version of BT508/ BT506, Autel MaxiBAS BT608 (E) car battery tester can test 6V/12V 100 to 3000 CCA batteries including Flooded, AGM, AGM Spiral, EFB, and GEL batteries. Autel battery tester BT608 (E) is compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA protocols, supporting 12V/24V cranking & charging systems tests. Moreover, its adaptive conductance ultra-high diagnostic accuracy rate and battery reset features make it perfect for repair shops.
• SMART ADAPTIVE CONDUCTANCE, >95% ACCURACYThanks to Autel Maxibas BT608 (E)s innovative adaptive conductance (v-alued 1000+ B-ucks), it can diagnose battery with low capacity with ease (unlike traditional battery tester, no need to charge and retest). Diagnosis test accuracy rate by 95%, bad battery detection rate by 63.55%, reduce charge and retest by 30.03%, detect the battery SOH, and provides r-eliable results of the batterys cold cranking ability and reserve capacity.
• CRANKING AND CHARGING SYSTEM TESTAutel BT608(E) car cranking and charging system analyzer supports in-vehicle and out-of-vehicle testing of passenger vehicle batteries and testing 12 and 24V cranking/charging systems. Cranking and charging diagnostics can check the starter system, cranking voltage, engine cranking speed, and generator status. These test results will display on the screen and quickly determine the operating status of the cranking and charging system.
• ALL SYSTEM DIAGNOSIS & AUTO VIN Autel MaxiBAS BT608 (E) diagnostic scan tool has the same all systems diagnostic functions as Autel MK900BT/ MK900/ MX900/ MK808S/ MX808S/ MK808Z/ MK808BT PRO/ MP900BT. It can work on all available vehicle systems to read and clear codes, view live data, freeze-frame data, and ECU information for 80+ US, EU, and Asian makes, up to 2025, and even 2026 newest models. Auto VIN function can quickly identify vehicle information to improve diagnostic efficiency.
• REGISTER BATTERIES FOR 53 VEHICLE MAKESThe Battery registration function of Autel battery tester BT608 (E) is a necessary step to let your engine control module (DME) know the newly installed battery, and the vehicle will reset the old battery statistics, which help you avoid issues: Overcharge to shorten battery life; Energy management system malfunction; Start-stop function malfunction; Vehicle fails to start; The IGR malfunction and the energy recovery is invalid, etc.
• ELECTRIC APPLIANCE RESETAfter battery replacement/ registration, some vehicle systems may not work properly after a complete power loss. Autel automotive battery tester BT608 (E) comes with an "Electric Appliance Reset" feature to enable mechanics and DIYers to re-initialize or restore learned values critical to both safety and convenience-related vehicle systems like sunroof reset, lane-departure warning system, and Pre-Collision system and Emission Inspection and Maintenance program.
• L~IFETIME F.R-EE SOFTWARE UPDATES & Wi-Fi PRINTINGAutel BT608 (E) battery load tester comes with L~ifetime F.R-EE software updates and a 1-Year W~a.rranty to ensure users enjoy the newest functions in time. It can print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer. With comprehensive battery and charging system test functions, it will be your best doctor of your car battery!

Description

Autel is one of the world's famous providers of automotive intelligent diagnostics, inspection, and TPMS products and services. Autel products are sold to more than 50 countries and regions such as the US, Germany, the United Kingdom, and Australia. Autel has been deeply involved in the automotive intelligent diagnostic and testing field, including automotive diagnostic products, TPMS series and ADAS series. The Autel MaxiBAS BT608 can test 6- and 12-volt batteries up to 3000CCA and both 12-and 24-volt starting/charging systems. It has settings for Flood Lead-Acid, EFB, AGM, Spiral, and GEL battery types. The BT608 is a comprehensive battery and electrical system diagnostics tool featuring Adaptive Conductance technology to identify low-capacity batteries and thereby reduce battery misdiagnosis. The Android-based, Wi-Fi touchscreen tablet tool displays a quick battery health status, enables an automatic battery registration and features advanced AutoVIN and ScanVIN functionality for quick vehicle identification and battery specifications. Tool features shop manager application and a built-in thermal printer. Innovative Adaptive Conductance Technology Unlike traditional battery testers, Autel MaxiBAS BT608 car battery tester applies future technology “Adaptive Conductance” that can identify low capacity batteries or batteries that are almost completely discharged and thereby reduce battery misdiagnosis. No need to charge and retest, improves battery testing efficiency and accuracy for technicians and DIYers. Three highlights of the function: 1)Reduce Battery Misdiagnosis 2)Diagnose Low Capacity Batteries 3)Reduce Charge & Retest for Discharged Batteries What's the difference between Autel BT608 and BT608E? Autel BT608 and BT608 (E) have the same functions, E in its name means Sold Online. AUTEL BT608 Highlights: State-Of-The-Art Auto Battery Test Autel BT608 car load tester is designed to test 6V/12V Flooded, AGM, AGM Spiral, EFB and GEL batteries with CCA(100 to 3000 CCA), CA, SAE, EN, IEC, DIN, JIS and MCA standards. BT608 can test the battery state of health, offers illustration instruction guides for battery positioning and testing. State of Charge: The amount of energy stored in the battery relative to its capacity. Voltage: The difference in electric potential between the positive and the negative terminals of a battery. Measure Capacity: Battery energy storage capacity measured in Cold Crank Amps. Cranking Charging System Test BT608 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator). In-Vehicle Test In-vehicle Test is used for testing batteries that are installed in a vehicle. An in-vehicle test includes battery test, starter test, and generator test. Out-Vehicle Test BT608 can test the health of a battery when it’s not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard and battery capacity. Even when a battery is in a poor state of charge, it can accurately test its potential for stored energy without necessitating a recharge prior to test. This can expedite diagnosis and more quickly achieve the sales of a replacement unit. One Touch Battery Replacement/Registration with Illustration Guides BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process. After registration of new battery, it can perform vehicle systems initialization to reset the components. Re-Initialize Vehicle Systems to Make Them Work Properly Again After battery replacement/registration, some vehicle systems may not work properly after a complete power loss. BT608 batter test scanner comes with "Electric Appliance Reset" feature to enable mechanics and DIYers to re-initialize or restore learnt values critical to both safety and convenience related vehicle systems like sunroof reset, lane-departure warning system and Pre-Collision system and Emission Inspection and Maintenance program. Wireless All Systems Diagnosis Coming with a wireless VCI, BT608 can work on 83+ American, European and Asian vehicle makes and models up to 2019, 2020 and some up to 2021 to access and scan all available systems wirelessly via BT to perform all systems diagnosis, including reading and clearing fault codes, viewing live data, and freeze frame data. Combined Auto VIN and Auto Scan features, BT608 can quickly identify vehicle make, model and year and perform comprehensive scan on all available systems to perform efficient and accurate diagnosis. Auto VIN, Auto Scan, Plate Scan BT608 Auto Battery Test Scan Tool comes with Auto VIN, Auto Scan and Plate Scan features to acquire vehicle and battery specifications by simply scanning using the built-in 8MP HD camera. Easy Customized Report Sharing via Built-In Thermal Printer BT608 allows DIYers and technicians to print reports immediately after performing a test or later, all reports are saved in Data Manager. - Built-in printer (kit includes 2 rolls of paper) - WIFI printing via the Autel PC MaxiSuite desktop app - E mail - Customizeable: Report title, shop information, technician name Built-In Multimeter Software BT608 car battery load tester comes with built-in multimeter software which costs few hundred bucks itself. Note: The leads for the multimeter is optional with separate purchase. Lifetime Software Online Updates & Cloud-Based Apps Autel BT608 Car Battery Capacity Tester comes with lifetime software online updates for new-coming features, continuously improved software performance and increased vehicle coverage. BT608 Battery Test Scan Tool also features cloud-based apps like Remote Desk(Remote Assistance) and Data Manager for Data Logging with which auto technicians and DIYers can get best t-ech support from Autel engineers elite team.

Brand: Autel

Power Source: ➤android 9.0➤5.5'' Lcd Touch Screen With 720*1280 Resolution

Operating System: Android 9.0

Screen Size: 5.5 inches

Item Highlight: 2026 Up of BT508/ BT506, Adaptive Conductance, 6-12V 100-3000 CCA, Cranking Charging Test, Battery Reset, Built-in Printer See more

Brand Name: Autel

UPC: 724725986035

Number of Items: 1

Manufacturer: Autel BT608

Item Weight: 16 ounces

Model Number: Autel MaxiBAS BT608

Manufacturer Part Number: Autel

Power Source: ➤android 9.0➤5.5'' Lcd Touch Screen With 720*1280 Resolution

Operating System: Android 9.0

Screen Size: 5.5 inches

Native Resolution: ➤android 9.0➤5.5'' Lcd Touch Screen With 720*1280 Resolution

Item Highlight: 2026 Up of BT508/ BT506, Adaptive Conductance, 6-12V 100-3000 CCA, Cranking Charging Test, Battery Reset, Built-in Printer