3PK 0.2+0.4+0.6mm P2S Hotend Kit for Bambu Lab P2S/X2D/H2D/H2S/H2C Anti-Clogging & Leak-Proof Design for Bambu Lab P2S Nozzle Hardened Steel Wear-Resistant P2S Extruder Kit for Bambu P2S Combo
Condition: New
Buy Now, Pay Later
As low as
$5
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Tuesday, Sep 8
Recently Viewed
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 3PK（0.2/0.4/0.6mm）Hotend
Features
- Wide Compatibility: This 3-piece extruder hotend replacement kit(0.2mm/0.4mm/0.6mm) is designed specifically for Bambu Lab 3D printers, compatible with bambu lab X2D, P2S, H2S, H2D/H2C left side hotend, and A1/A1 Mini models. The silicone cover features a P2S positioning identification code to ensure accurate matching.
- Convenient Installation and Modular Design: Featuring a compact modular structure, the heating block, heat break, nozzle, and silicone cover are pre-assembled. No wiring or stripping is required, allowing for quick and direct installation on the corresponding printer, simplifying the replacement process.
- High-Quality Components for Enhanced Printing Performance: The hotend kit comes pre-installed with 0.2mm&0.4mm&0.6mm hardened steel nozzles, an all-metal heat break, a heating block, and a silicone cover with an identification code. These components work together to ensure smooth filament extrusion, helping to improve model printing accuracy and surface quality.
- High Performance Supports High-Speed and High-Temperature Printing: The all-metal heat break design promotes even heat distribution, supporting high-speed printing; the hardened steel nozzle is temperature resistant up to 500650C, suitable for high-temperature engineering materials such as PEEK and PEI, expanding the range of printable filaments.
- Leak-Proof Design and Usage Reminder: The integrated all-metal molding process eliminates leakage problems caused by traditional threads or seals; it is recommended to check and tighten the components before use to prevent loosening during transport, and re-level the print bed after installation to ensure optimal printing results.
Package Dimensions: 3.58 x 2.05 x 1.26 inches
Item Weight: 2.08 ounces
Manufacturer: Wefuit
Date First Available: November 27, 2025
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Tuesday, Sep 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.6mm Hotend
Very close to the original for a very reasonable price. Worked as well as the OEM version so no complaints.
Reviewed in the United States on July 29, 2026 by CH
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.6mm Hotend
These drop-in hotend assemblies are an excellent addition to the toolkit. Picking up both the 0.4mm and the 0.6mm gives a ton of flexibility depending on the project. The 0.4mm is perfect for hitting tight tolerances on custom mechanical hinges and detailed cases, while swapping to the 0.6mm makes pushing out larger structural prototypes significantly faster. They arrived well-packaged with the heatsink and silicone sock already installed, making the swa practically effortless. After running a quick flow calibration in the slicer, extrusion was incredibiy consistent. Highly recommend if you want reliable, hassle-free replacements.
...
show more
Reviewed in the United States on July 21, 2026 by Wes Alexander
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
I Installed these on a Bambu Lab H2D with a PEO+PET carbon-fiber plate from the same supplier. The plate was exceptionally inexpensive and has performed admirably. The nozzles are brand new, so this is a first-use review, not a wear test. Flow-rate calibration in Bambu Studio landed exactly where it should. Coarse pass best sample was +5. Fine pass best sample was 0. Extrusion was consistent across the test blocks — even fill, no missing lines, no obvious scatter. In the short term they have performed exactly as expected, and as well as a brand-new set of official Bambu Lab tips. (but at a fraction of the cost!) I have only a few minutes on them so far, so I cannot give a durability report yet. I am starting a print that will run about 75 hours. I will try to remember to update this review at 200 hours. one unexpected perk is that the included silicone boot is a small upgrade over the official Bambu sock. It fits a little better. I tried it on an official nozzle as well and it still seated cleaner. Only nitpick is the packaging. (honestly if I don't find something wrong you will think I work for the company!) The box is labeled as a 2-pk for the P2S. That can scare people who are new to this hobby and do not know the nozzles are cross-compatible. (Don't be scared!) I know what im doing for the most part and I had to look it up to make sure it was the right nozzle and not the wrong one shipped to me by accident. lets face it Amazon has made mistakes in the past. (That is how and why I have a book on paragliding). P2S, H2D, and X2D share the same nozzles. If you have one of those machines, these will fit, so no worries! Exceptionally happy with the purchase. For the price, this is an easy buy. I am going to see if they have High flow nozzles or G10 build plates now and will review them in the future if they do. i have noticed a lot of the alternative manufacturers of tips and plates get bad reviews but when you actually look deeper its because people didn't calibrate or or did not understand what they purchased. So im going to start doing some honest reviews of less expensive 3D printer parts! Hope this helps someone!
...
show more
Reviewed in the United States on August 30, 2026 by Daniel Zikursh
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
This are copy cat hot ends for the P/X/H Series printers, it says A1 but I doubt that is even possible. One PLA print came out ok, it had some gaps and strings, but it did print. After that it was never successful for another print and failed with any other materials I tested with TPU, PETG, etc. While the hotend will fit in said printers and PLA will extrude, for a bit, it seems the removable nozzle does not play well with all materials. It seems to cause a bit of pressure that makes the extrusion gear to skip on the material enough to dent or warp it. Thus the printer carries on while not extruding but without any sort of extruder or filament alert as both are chugging along without a care. While these are cheap and you get a lot of silicone socks, the socks are also thinner and of a different material so they don't seem to hold heat as well as the OEM. Dunno if that could also be a factor for the extrusion issue but it could be.
...
show more
Reviewed in the United States on May 26, 2026 by Buruko
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
Price per unit is perfect. Identical to the original nozzle
Reviewed in the United States on July 15, 2026 by Jeanine Badrak
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
Amazon ratings are very confusing - some praise these to the skies as economical solutions that work well. All I can say is that it spaghettied consistently, no matter what I did. I managed to fix my original hotend with stuck filament (heat a tiny allen wrench, plug it in the top, let set, heat the lower part, then pull out the allen wrench with the filament stuck to it). So I just threw these items away. (I will say that if it had worked for me, it would be good value for money: two nozzles, each with its own sock, and two extra socks. So if it works for you it's a great deal.)
...
show more
Reviewed in the United States on July 9, 2026 by 45F
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
My OEM nozzles were clogging. Bought these as a quick fix months ago, however haven't stopped using them since. Clog free - personally have had ZERO issues printing once I switched to these. The OEM ones were problematic.
Reviewed in the United States on August 3, 2026 by Grey
Size: For X2D/P2S/H2D/H2C/H2S/A1/A1mini
Style: 2PK 0.4mm Hotend
Sometimes you’re not ready for a commitment. You’ve had a bad experience and not ready for something permanent. You need something to tide you over until you heal. Then you part ways. No hard feelings. These nozzles won’t heal a broken heart but they will replace a clogged OEM nozzle until you get things working again and are ready to trust your Bambu again. My only complaint is was that thought they were OEM when I ordered them. But they worked in a pinch.
...
show more
Reviewed in the United States on August 25, 2026 by Josh F.