Shinco 12,000 BTU Portable Air Conditioner, Portable AC Unit with Built-in Cool, Dehumidifier&Fan Modes for Room up to 400 sq.ft, Room Air Conditioner with Remote Control, 24 Hour Timer

This portable air conditioner displays two cooling capacity numbers: Which number should you trust? The SACC rating. SACC (Seasonally Adjusted Cooling Capacity) gives you a more realistic estimate of how the unit will perform in your actual living space. The ASHRAE number is higher because it does not account for real-life factors like heat leakage through windows, doors, or walls. Key point: The unit itself is the same – only the testing method changed. Since 2017, the U.S. Department of Energy (DOE) has required SACC as the standard for portable ACs to help consumers make fair, accurate comparisons. For real-world performance, please refer to the 7,500 BTU (SACC) rating. The 8,000 BTU cooling capacity can cool a room up to 200sq.ft. It allows you to adjust the temperature between 60℉ and 86℉ to enjoy a comfortable environment. The fan speed also can be adjusted in cool mode. In dry mode, water will collect inside the unit and must be drained by removing the plug from the bottom of the back of the unit. If the tank is full, “FL” will appear on the display to indicate that it needs to be drained. The unit will stay on low fan speed and maintain a temperature of 62℉. We can manually control the direction of the air outlet grille. Wash the filter every two weeks to keep the efficiency. Enable us to move the unit from room to toom. Connect the drain hose to avoid the water leak. Does it have to go through a window? Yes. The hot air must be vented out to make the room keep in cold. What's the accessories dimension? The window selaing plate is adjustable, it can be adjusted between 37-50.2in. The exhaust hose is retractable, it's 10.63-59inch. Does the drain hose must be connected? Yes, especially in cool and dry mode. "FL" alarm code indicates that you need to connect the hose Why does this unit make noise? The item has a inner compressor which is used to cool, it will make noise in cool mode and dry mode. We suggest you to change the fan speed to low to get a lower noise. Unit Not Blowing Cold Air (Hot Air Only) -Incorrect Mode Setting: 01.Ensure the unit is set to Cooling Mode and not just "Fan" or "Dehumidifier." 02.Check that the temperature is set below room temperature. 12,000 BTU 8,000 BTU 10,000 BTU 12,000 BTU WIFI