SCULPFUN S30 Ultra 33W Large Laser Engraver with Smart Air Assist & Extension 600x 600mm(23.6"x 23.6") Area, 0.1mm Metal Laser Cutter, High Accuracy Laser Engraving Machine, 10 Times Service Life
Condition: New
Checking for product changes
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Color: S30 Ultra 33w With Air Assist
Features
- 33W Stronger Laser Cutting Machine: SCULPFUN S30 Ultra has a true 33W output power, The power is increased by 65% and the cutting capacity is increased up to 50% compared with 20W. Extra-long effective laser cutting range, you can cut 20mm wood, 15mm acrylic and 0.1mm steel at a time, the powerful laser engrave for colorizing metal. Designed for those pursuit the ultimate in cutting capacity and speed.
- High Precision & High Speed: S30 Ultra 33W laser engraver for wood and metal with 0.08mm ultra-fine compression spot makes engraving more delicate and clear, restoring the original image as much as possible. Upgraded 0.005mm high-precision guide rail makes the machine move faster, smoother and more accurate. 400mm/s engraving speed to improve efficiency.
- 23.6"x 23.6"(600x 600mm) Larger Working Area: The S30 Ultra 33W laser engraver machine feature a 600x 600mm work area, a 225% increase in area compared to all 400x 400mm areas on the market. Not only is the space more than doubled, but you also save money by not having to purchase a separate extension kit. We extend from both X-Y directions (this is called large), unlike others that only extend one side of the Y direction (which can only be called long and needs to be purchased separately).
- Engraving Machine with Smart Air Assist: Including air assist, with the technical support of 32-bit air assist motherboard, we can achieve air assist auto off when engraving and air assist auto on when cutting. No manual, save time and effort. With air assist, you can cut cleaner and faster, better work and increased value. SCULPFUN provides 2 years free warranty service, please feel free to contact us if you have any questions, we will definitely give you a satisfactory solution.
- Laser class: 4, laser output: 33000mW
Product Dimensions: 28 x 28 x 2.8 inches
Item model number: S30 Ultra 33W
Item Weight: 19.8 pounds
Date First Available: July 31, 2023
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
By now, most people know that when buying a cheap projector, the advertised lumens are optimistic at best and outright lies at worst. Many people refer to these as 'marketing lumens' and unfortunately laser engravers aren't immune to these sorts of marketing exaggerations, notably in the depths you can expect to cut. I regularly cut 1/16" plywood (item B09NDGV15L or item B086VNFS85) in addition to engraving it (custom shaped tags, 'tokens' - things like that) and it does a fine job cutting through at 250-275mm/min and maximum power. I also cut plywood (item B08QGSBT2N) that is twice as thick (1/8" - don't trust the listings of those, I have checked bought all of them & remeasured with calipers - I like all three, but their listings aren't terribly accurate), but with a worse success rate. for one thing, you can't just slow down the laser (1125mm/min) as this would likely cause massive scorching and/or a fire. It also doesn't scale linearly (probably due to the glue between layers), so while I can do 1/16th" in one pass, I generally do 4 passes on 1/8" despite only being twice as thick. I have once or twice successfully cut 1/4" but I strongly advise against it (without adding air assist, which Sculpfun hasn't get released for this engraver, so it's currently quite DIY). I don't (yet) own a honeycomb and cutting works best when you don't have a flat surface immediately underneath, so I use my grandfather's old machine vice to hold the material elevated. Sometimes it won't go 100% through & I have to finish it with an razor blade (not the end of the world, but a pain) & sometimes the third pass will cut entirely through the part that's cut last, causing the piece to drop, always in the path of the laser finishing the cut (ruining it - about 10% of the time). The crummy part is these are quite detailed ornaments, so while it's only $0.50 in materials, it's at least 10 minutes in laser time wasted (plus setup, etc.). I know, the solution will be to get a honeycomb, so not deducting a star for this, just mentioning it for people new to these devices. Engraving, on the other hand, this does really well & while you /can/ do elaborate things with massive amounts of grays, keep in mind this will potentially take /hours/ to complete (on a consumable laser - they don't hast forever) and while a neat novelty, won't look any better than a laser printed image (probably not even as good). They key, I have found, is less is more. Use a fairly high contrast so that the laser isn't having to burn so much. Also, Cedar seems to work *really* well. Of the solid woods I have used, only Pine was disappointing (it worked, just nothing special) and the one that surprised me the most was Walnut - it's quite a but harder than Cedar, but the laser didn't mine (I suspect due to the darker colour). I also found the engraving of light ply went a little easier when I stained the ply in advance a darker colour (though I can't say this won't cause a release of harmful fumes, so please research this before trying, especially if you don't have an enclosure with exhaust - I do & find this to be essential). Regarding enclosures, Sculpfun really doesn't have much by way of accessories that a lot of other manufacturers have (they only just came out with a rotary roller, for example), and in addition to not having air assist, they do not have an enclosure (both as of this writing). If anyone replies to this asking for it, I'll make the design for mine available to anyone that wants it (it was my second attempt - I learned a lot from the first one that wasn't great - and I'm really happy with it). All-in-all, the device is good, just make sure you have realistic expectations & don't expect your first few things to be wonderful - it takes time and patience to dial in your settings. I do not regret buying this model (some 65 days later and counting) and would be happy to share some settings, etc. that I learned the hard way if anyone replies to this review with questions. Attached images are some of the tokens I made to pass out at a concert this fall (for fun, not to sell).
...
show more
Reviewed in the United States on April 18, 2022 by Jazz Jazz
Color: S9
I bought this as my first laser engraver it took a little bit of time but this unit is very easy to use. It has excellent performance it's easy to assemble and the value for your money is top notch
Reviewed in the United States on June 30, 2024 by Tony
Color: S9
The media could not be loaded. The price is great. Very large work area. The only complaint I have is they don't have dedicated software. I was just starting to get used to light burn and my free trial ended. I guess I got spoiled with the laser pecker software. That was way easier. But just a small learning curve. I also don't believe it will cut 15 mm which it says. It took 3 or 4 passes to cut 6 mm. As for speed. It runs super fast and does a great job. Overall I am very satisfied.
...
show more
Reviewed in the United States on March 5, 2024 by Michael willis Michael willis
Color: S9
After the laser module performance declines to where it doesn't cut 1mm of craft wood they tell you to let the laser cool for 15 minutes every 4 hours. The most interesting bit of information is that the laser module life is one year... Only one year???? Where is the instructions warning the customer about this issue? This machine is entry level so the expectation on their end that I magically know this is unreasonable. I purchased this on February 21 and here in June it is apparently worn out. They were "nice enough" to provide links to web stores where the laser module can be purchased. 5 months of use isn't much for the money spent on this. Unfortunately, I purchased the roller unit and the expansion as well. Overall I am disappointed in my experience with both the Sculpfun s9 and the company. If the laser head is indeed that fragile I certainly would never have purchased this machine in the first place. Update: After many emails explaining the situation they nowwant me to senda picture of the machine. ???? - it looks like any other s9 with an extension kit.... delay, delay, delay.... I give up and will simply buy another laser moidule from a different company for it.
...
show more
Reviewed in the United States on June 21, 2022 by Jerry Borsh
Color: S30 Ultra 22w With Air Assist
Excelente producto Excelente vendedor
Reviewed in the United States on September 7, 2024 by Jhorman
Please understand, this laser is great for etching, NOT cutting. It can cut, but it will take approx 12 hours to cut one 6 inch circle out of the thinnest softest wood you can find at home depot or lowed. Ordering the 3 mm wood online is fine and dandy. But your then limiting your size of projects and the prices are crazy. So if your getting this for cutting, DONT.
...
show more
Reviewed in the United States on March 26, 2022 by Thomas G.
Love it. The software don't do well with custom stuff, but if you have another means of setting it up, you can save it and load it into the laser program and it does the rest. I'm a cricut user so I use that and save it and then upload it. Can engrave deep. Does photographs amazingly. Sturdy construction and easy to build. I was on the fence, but after a few times and getting use to it, I would strongly recommend this item.
...
show more
Reviewed in the United States on February 26, 2022 by Alan DeMers Alan DeMers
.
Reviewed in the United States on June 25, 2024 by Gustavo Angeriz