K&N Cold Air Intake System: High-Flow Air Filter, Increase Performance & Acceleration: Compatible with 1996-2004 Ford: Mustang GT, 57-2519-3

Features

• DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
• IMPROVED ENGINE SOUND - HEAR THE GROWL: K&Ns intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
• BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
• HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&Ns red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
• EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
• MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.

Description

K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your vehicle and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.Compatible Vehicles:1996-2004 FORD Mustang GT Designed to provide increased horsepower, the K&N 57-2519-3 Second Generation Fuel Injection Performance Kit is a quick solution for vehicle owners who are looking for an increase in reliable power. Street legal, installable in 90 minutes or less and built around K&N's High-Flow technology, which utilizes a special oversized and washable cotton gauze air filter and special cold air intake, nonmetallic tubes, the 57-2519-3 drives a massive amount of air into an engine, which translates into power affordable on virtually any budget. .caption { font- family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: -15px; } table.callout { font-family: verdana; font-size: 11px; line-height: 1. 3em; } td.vgoverview { height: 125px; background: 9DC4D8 url( page/callout-bg.png) repeat-x; border-left: 1px solid 999999; border-right: 1px solid 999999; padding-left: 20px; padding-right: 20px; padding-bottom: 10px; width: 250px; font-family: verdana; font-size: 12px; } Affordable, street legal horsepower upgrade. View larger. Measurable improved performance. View larger. Quick and easy installation. View larger. How High-Flow Technology Works How does the K&N 57-2519-3 increase horsepower? By eliminating airflow obstruction in your engine. Restriction of air flow between an air filter and an engine robs even the most powerful engine of horsepower. K&N air intake kits virtually eliminate air path restriction by replacing the standard air filter and the entire air path to the engine. The aerodynamically engineered conduit that makes up the 57-2519-3 drives a massive amount of air into an engine, which translates into power. This conduit begins with an oversized conical high-flow air filter. This larger filter can fit into the engine compartment using factory holes and mounting points because the K&N 57-2519-3 replaces your stock intake tube, and air box. This provides more airflow at lower restriction than a standard filter, limited by the size of the factory air box. The oversize air filter also captures and holds more dirt, increasing the service life before a cleaning is required (up to 100,000 miles). The filter is also isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. The filter attaches to a rotationally molded tube made from nonmetallic interlaced high density polyethylene (HDPE). This allows for precision shaping of the tube to reduce turbulence and accelerate airflow into the engine. This is why some K&N tubes have unique shapes or indentations that are specifically engineered for each engine configuration. Finally, the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high- flow intake system available today. Street Legal Many K&N intake systems are street legal in all 50 states and include a California Air Resource Board (CARB) Executive Order (EO) number that ensures the kit has been tested to comply with emissions standards. EO numbers apply to the kit as well as the year, make and model it is being installed on. Systems with no EO number are street legal in most states but may not be used on emissions controlled vehicles in the state of California or other states adopting California emission standards. Consult K&N's website to search by part to see which cold air intakes are CARB exempt for which vehicles. Key Features: Guaranteed to provide increased horsepower and acceleration (10.07 hp @ 4,945 rpm measured by manufacturer).Engineered to specific vehicle design. See vehicle search above for compatibility.Easy to install, usually in 90 minutes or less and lasts up to 100,000 miles before service is required, depending on driving conditions.CARB exempt and street legal in all 50 US States.Air filter is washable and reusable for extreme durability, but can also be easily replaced if necessary.Works with original manufacturer computer systems.Replaces OEM filter and air box, and is designed to use factory holes and mounting points whenever possible.Million mile limited warranty.What's in the Box 1-K&N 57-2519-3 Second Generation Fuel Injection Performance Kit (includes air intake tube, washable air filter, heat shields, hoses, hose clamps, hardware and detailed instructions necessary for installation). Limited Warranty K&N O/E replacement air filters and air intake systems purchased from authorized dealers are backed by a million mile limited warranty from the manufacturer when used primarily on paved roads and on vehicles for which they were designed. If one of these products ever fails to provide complete satisfaction, K&N will replace it at their discretion. About K&N Engineering K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. From humble beginnings as a family run business over 35 years ago, K&N Engineering, now a truly global company with offices in the UK and the Netherlands, continues to exist as a family owned business with an enthusiast mindset and a direct connection with motor sports that carries over throughout all levels of management and manufacturing. Note: Some FIPK's will not fit on vehicles with lift kits. Diesel pickup truck performance intakes for Power Stroke, Duramax and Cummins Engines are also available.

Brand: K&N

OEM Part Number: 57-2519-3

Global Trade Identification Number: 08

Manufacturer: K&N Filters

Automotive Fit Type: Vehicle Specific Fit

Brand: ‎K&N

OEM Part Number: ‎57-2519-3

Global Trade Identification Number: ‎08

Manufacturer: ‎K&N Filters

Automotive Fit Type: ‎Vehicle Specific Fit

UPC: ‎024844095008

Model: ‎Cold Air Intake Kit

Item Weight: ‎9.6 pounds

Product Dimensions: ‎20 x 12 x 12 inches

Country of Origin: ‎USA

Item model number: ‎57-2519-3

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Machined

Manufacturer Part Number: ‎57-2519-3

Date First Available: September 14, 2004