iSpring T11M 11 Gallon Pre-Pressurized Water Storage Reverse Osmosis Systems ro Tank, White
Condition: New
Buy Now, Pay Later
As low as
$24.01
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Tuesday, Mar 3
Recently Viewed
Style: 11 Gallons
Features
- Reliable Water Supply: Our 11-gallon water tank (holds up to 8.2 gallons) is designed to work seamlessly with your reverse osmosis (RO) water filtration system or other water filter systems, ensuring a constant supply of purified water.
- Superior Quality Materials: Constructed from FDA-grade polypropylene liner and high-grade butyl diaphragm, with 304 stainless steel connections, this tank guarantees safe, tasteless, and odorless water storage. It is tested by an independent third-party to meet NSF/ANSI standards.
- Stable Pressure Maintenance: Pre-charged to 7 psi with compressed nitrogen, the RO pressure tank maintains stable air pressure over time, preventing waterlogging and ensuring consistent water flow. The tank can be recharged to extend its usability.
- Complete Installation Kit: The kit includes a shut-off valve, tank connector, and tank stand, making it easy to integrate with your RO system under sink. It efficiently discharges water in both vertical and horizontal positions.
- Lifetime Customer Support: Enjoy peace of mind with our lifetime free tech support. Our dedicated customer service team is always ready to assist with any issues related to your reverse osmosis storage tank.
Description
Water goes through a reverse osmosis membrane very slowly and people don't have the patience to wait a long time to get a cup of water. For this reason the residential RO units need a water storage tank to store the filtered water. The RO tanks can deliver stable and constant water flow when the faucet is opened. The concern that pollutants might come from air with the use of an open tank favors the use of a closed expansion tank. Lead in drinking water causes health risk, brass and copper are banned from being used in drinking water. This tank uses stainless steel connections to avoid the lead concerns. This tank is tested by independent third-party to meet NSF/ANSI Standard. From the Manufacturer Water goes through a reverse osmosis membrane very slowly and people don't have the patience to wait a long time to get a cup of water. For this reason the residential RO units need a water storage tank to store the purified water. The RO tanks can delivery stable and constant water flow when the faucet is opened. The concern that pollutants might come from air or animals with the use an opened tank favors the use of a closed expansion tank. Lead leaching to drinking water the cause of health risks, brass and copper are banned for use in purified/drinking water. This tank uses stainless steel connections to avoid the lead leaching concerns. This tank is NSF approved under standard 58, and CE approved under the PED (pressure equipment directive). Features - Stainless steel connection built for Reverse Osmosis water storage tank; pump tank & thermal tank applications. - Brass cap with internal O-ring guarantees no air loss from air-vent. - Smooth internal air vent cap prevents diaphragm damaged. - High-grade butyl diaphragm, post-cure procedure insures a tasteless and odorless water chamber - NSF 61 and 58 listed. - IAMPO approved. - CE Mark approved TANK BALL VALVE NOT INCLUDED Specifications & Dimensions - Height: 22", Diameter: 15" - Tank storage capacity: 11 gallons - Shipping weight: 25 LBS - Packing dimension: 16w x 16d x 23h
Brand: iSpring
Special Feature: Leak Proof, NSF Standard
Product Dimensions: 16"L x 16"W x 24.5"H
Material: Stainless Steel
Capacity: 11 Gallons
Included Components: RO tank
Package Information: Stand
Installation Type: Under Sink
Purification Method: Reverse Osmosis
Power Source: Manual
Brand: iSpring
Special Feature: Leak Proof, NSF Standard
Product Dimensions: 16"L x 16"W x 24.5"H
Package Information: Stand
Installation Type: Under Sink
Power Source: Manual
Item Weight: 23.55 Ounces
Model Name: 11 Gallon Pre-Pressurized Water Storage Tank for Reverse Osmosis (RO) Systems
Supported Water TDS Level Maximum (PPM): 500
UPC: 662425023691
Global Trade Identification Number: 91
Manufacturer: iSpring
Item Weight: 1.47 pounds
Item model number: T11M
Is Discontinued By Manufacturer: No
Date First Available: September 16, 2010
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Tuesday, Mar 3
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: 4 Gallons
Excellent quality and performance...improved my RO system's capacity and pressure dramatically! Easy to install and the process was very simple.
Reviewed in the United States on January 21, 2026 by Ned
Style: 20 Gallons
This is a large 20 gallon tank that holds roughly 14 gallons of clean water for a reverse osmosis system. As a disclaimer, this arrived dented for me, but Sean from iSpring's customer service was wonderful to work with, and he quickly sent a replacement tank that arrived in perfect condition. This has multiple connectors provided, and the connections are done at the BASE of this unit. This works best with 3/8" line. The top part of the tank is where the bladder is, and the water sits near the bottom. This arrives charged and almost ready to use. They recommend flushing this once filled to ensure it is clean. I HIGHLY you do that with tap water prior to using. This takes forever to fill with RO water, so tap is much faster. Enough connectors were provided that I was able to hook this up to a utility sink to fill and drain this several times before install. This works just as well as smaller tanks, but the pressure is maintained much longer with this size tank. Overall, I am very happy with the performance and value of this tank.
...
show more
Reviewed in the United States on March 20, 2025 by Ash
Style: 4 Gallons
I was pleased but skeptical regarding the interchangeability of reverse osmosis pressure tanks. Our system is nearing fifteen years old (Whirlpool WHER 25) and had greatly diminished flow and capacity. I tried blowing out the old tank but to no avail. This tank looked like a good balance of price and capacity. Installation was a breeze. This tank is a gallon or so larger than our original and we are back to a really well functioning RO system!
...
show more
Reviewed in the United States on December 24, 2025 by futuresbroker
Style: Ultrafiltration Filter System
Update: As per my review below, I had some trouble installing due to instructions that were not really clear or suited to this particular product, which Ispring says is brand new. Since then they actually tracked me down and cared about what I had to say. According to them they are rewriting the instructions, not shipping with the funny dust caps, and considering additional parts to make the installation go smoother. I was impressed because in this day and age few companies actually seem to care about what their customers really think. I have come to the conclusion that this company does. And the filter system is now working fine, so don't hesitate to buy. I'm leaving my review below in case it takes a while to update the instructions. It might shave a few hours off someones install time. Changed to 5 stars. If you have any problems they will definitely help, and that is a really good thing. ================================================================ Just finished the installation. I'm a pretty handy monkey, but the installation took about 5 hours of my time (including 3 trips to the home improvement store and a some-what helpful phone call to ispring). First-off the manual is misleading and clearly written for another product or previous version of this product (or maybe a new-fangled sausage making machine). The parts of the manual that do apply to this product, like how to connect the little push-on connectors, suffer from an excess of brevity and lack of detail and conciseness. In an attempt to be helpful to future purchasers of this product, at least until ispring updates these kits and instructions, here's what I learned: First tip: the faucet included in my box does not require a 1/2 inch hole, as the instructions state, but a one inch hole. Actually one inch is too tight, make sure you have a 1 1/8 inch hole saw attachment for your drill, and make it a good bi-metal one if you need to cut through a stainless steel sink. Home depot sells rigid brand bits that suit this purpose. It will run you about $15 unless you already have a rigid brand bit shaft (or equivalent). Second tip: the faucet that came with my filter has three colored plastic hoses already permanently attached. Red, white and blue (I dig the patriotism). Unfortunately which gets attached where is not mentioned anywhere in the manual. In the manual it says to screw the water hose to the bottom of the faucet. Clearly referring to a different type of faucet. Also if the three hoses were just a little longer you would probably not need to bother adding extension hose (an extra leak risk). More on extension hoses later. The colors are mentioned in the Amazon description, way at the bottom, but it bears repeating. "Connect the BLUE tubing of 3-color tubings on the faucet to cold water line, RED to the 1st stage on the right, WHITE to the 3rd stage on the left." Note: This is #ssbackward if you are from an English speaking country ... just saying. Third tip: The filter box itself has funny little horn or funnel shaped things on the ends of the inlet (left) and output (right) angle connectors. These are not mentioned at all in the manual. You can not push the hoses on with these in place (you can try as I did ... if you get excited by frustration) because these are some weird sort of dust plugs. You must pull up with your fingernail on the very outer ring of the connector (pushing it on a spring ever so slightly towards the more bulbous part) then with other hand pull the horn thing out. You can discard these, or I found they make nice hats for very small garden gnomes. Basically you can connect the red and white hoses now by pushing them with force into the connector until they snap. Pull back a little to make sure it is connected. If you need to cut extension hose cut it straight, and use the supplied double-sided connectors. I recommend you push the little blue horseshoe shaped clips (supplied) between that outer part of the connector and the more bulbous part. These (I think?) are to make sure the connectors can't shoot apart from water pressure. No mention in manual about these. You can leave them off, as I did at first, if the under side of your sink needs a good spraying out. Fourth tip: In order to connect the blue hose to the cold water line you need to first install some parts. My sink had a 3/8 inch stainless steel hose with female compression fitting attached to a male 3/8 compression fitting shutoff valve coming out of the wall. Pretty typical I would assume. The kit comes with a 1/2 inch plumbing style thread, male to female connector, with a hole to thread the valve the blue hose goes onto, in the middle. A way to tap into your cold water line, would be eazy peezy if it was threaded for 3/8 compression fittings, but it's half inch and has coarser plumbing style threads. So off to the Home Depot you go. Don't forget another roll of Teflon tape to add to your Teflon tape collection while you are there. Actually the folks at the Home Depot weren't that helpful (surprised?), but the small local hardware store in my old town was. You will need, as it turns out (if your sink is like mine) a 1/2 inch plumbing style male to 3/8 inch compression male adapter to connect your current hose leading to your cold faucet to this new part (btw thread the little supplied valve the kit came with into this part with a little teflon tape first so you can get it good and tight before you are lying on your back under the sink). Then on the other end you will need another short stainless hose (only way I can find to do this with available parts ... why it took three trips) 1/2 inch plumbing female, which attaches to other end of this new part, 3/8 compression female which connects to the part your faucet hose used to be connected to. These parts should run less than $15. Tip five : To connect the blue hose to the metal valve from the previous section you need to put it against the nipple, screw off the nut collar and slide it down the hose temporarily, then push it on the nipple all the way, and man it's a tight little bugger (I sprayed the nipple with a little Pam cooking spray, hey it was in the kitchen), then put that nut collar back on and tighten it down real tight with a half inch wrench. Why these filters don't come with a 3/8 inch compression fittings on each side of the filter box, so you can just screw your standard hoses on that you can get from any hardware store, is beyond me. There must be a reason. Maybe these filters are designed by the same folks who design those charming "blister packs" that you need a chainsaw to open? When I tested the water it was cloudy and tasted a little funny, it got better after I ran the tap for a while. Now it tastes pretty darn good. Even my cat likes it. Hopefully it will not develop leaks.
...
show more
Reviewed in the United States on May 16, 2013 by Jimbo
Style: Ultrafiltration Filter System
I'll give this 4 stars for being what I wanted and at the best price and appearing to work (a good filter that removes VOC's and doesn't waste water or require a separate tank). I took a star off for the installation manual. Installation was tricky, mostly because I have never installed an under sink water filter before. In retrospect, there aren't that many steps and I probably could do it again in 30 minutes. As it was, it did take multiple hours with some indecision and a trip to home depot. Here are my particular installation notes, which are meant to compliment what other reviewers have said. This is not a complete guide. 1.) The instructions do suck. The wording is hard to follow and the pictures don't really illustrate what to do (and they are low res). One picture has an arrow to where a drainage tube would go, but this model doesn't do reverse osmosis and doesn't need one, but that detail causes confusion. Incidentally, the tape on the bottom of the box said "Reverse Osmosis" on it which made me questions things more. The most valuable thing in the entire book is a single picture called "water route diagram" that shows you how the main unit should look when hooked up. 2.) The cold water tap/adapter that came with the unit was 1/2 inch in size. As mentioned by others, my cold water supply is a 3/8 inch connection. However, the end of the flex pipe that connects to the faucet is 1/2 inch, so I was able to install the adapter up there without any extra parts. Sadly, I ended up going to home depot studying the various tubes and adapters before I realized this would work. 3.) There are little plastic cones going into the tube valves of the unit. Nothing mentioned them, so I watched a video for a different model to know how to proceed (I didn't want to break anything which I think I would have if I tried to yank them out). There are little blue horseshoe shaped bits of plastic holding an inner plastic piece in place. Pull those blue horseshoes off, push in the inner plastic part around the cone towards the unit, and then the cones will release. The reverse action is similar to how the tubes are installed. 4.) All my tubing connections leaked the first time because I didn't use enough force to push them in. It takes a decent amount of force to get the tubes to slide through the inner seals/washers for them to be water tight. With wet hands, I had to remove the tubes and retry several times for it not to leak. 5.) Like others said, red tube goes from the cold water valve to the filtered water faucet. The blue goes to the right side of the unit next to the stage 1 sediment filter, and the white tube exits the left side next to the stage 3 block carbon filter. I read another review that claimed the order was left to right instead of right to left. That was not true for me and the order of the 3 filter stages on my unit matched the 3 pictures of the models on the front of the manual. 6.) If your sink had a cover over 2 soap or water filter holes and you had to expose 2 holes to install this filter, hardware stores sell single sink hole covers that screw in and cover up the extra hole. I don't plan on testing my water in any way. I assume this filter does it's job. The water tastes good to me though I doubt my ability to judge that. It's still coming out mildly cloudy after 5 minutes of running it, so I'll post back if I'm unhappy with how things look later on.
...
show more
Reviewed in the United States on December 17, 2014 by Kristopher J. Kemper