Search  for anything...
GARDENBEAUT

S1 Wood Chipper Shredder Mulcher 7 HP 212cc Heavy Duty Engine Gas Powered 3 inch Max Wood Diameter Capacity 20:1 Reduction Ratio 1-Year Warranty After Product Registration

    • Based on 92 reviews
Condition: New
Checking for product changes
$599.00 Why this price?
Save $0.99 was $599.99

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Non-returnable due to hazmat safety reasons

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Thursday, May 23
Order within 9 hours and 32 minutes
Available payment plans shown during checkout

Style: 20:1 Reduction Ratio-S1


Features

  • Wood chipper shredder comes with a 11.8-inch cutting rotor, which is larger than those of similar wood chipper. It is equipped with 2 blades and 6 hammers for more consistent speeds and efficient shredding. The efficient feeding speed and the grilling device on the discharge outlet effortlessly transform debris and branch leaves into mulch, enriching your garden with rich organic nutrients.
  • Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90-145 degrees
  • Powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine,capable of high volume Chipping/Shredding/Mulching with a Reduction Ratio of 20:1 handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
  • Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
  • Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines
  • The wood chipper shredder is equipped with highly efficient configurations, yet it only weighs 106 pounds. It also features a dual bearing design for added stability and 10-inch PU wheels for all-terrain use without worrying about tire punctures. The portable and lightweight design makes it easy to transport the wood chipper from one location to another.

Product Dimensions: 25 x 19.99 x 32.99 inches


Item Weight: 125.7 pounds


Manufacturer: GARDENBEAUT


Country of Origin: China


Item model number: GB


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Thursday, May 23

This item is non-returnable:

Non-returnable due to hazmat safety reasons

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Excellent value for the money
Review Image by Roger Roger
I’ve never owned a wood chipper and did a lot of research before selecting the S1. I was impressed with the ratings and unlike many other chippers there were no horror stories about engines that wouldn’t run, broken parts, etc. Other features like 20:1 reduction (almost all other 3” chippers are 15:1 or 18:1), light weight (119 lbs), a handle instead of a slot cut in the top of the hopper, windows to see what is going on inside and large opening to load branches. The weight was of concern because I have 2.6 acres with hills. Once assembled most of the weight is on the wheels and it is easy to pull by hand. Many people criticize manufacturers saying only 1.5-2” branches can be handled and machines will bog down or stall with 3” if longer than 3-4’. The S1 clearly states that for 3” only a 10” length can be fed so there seems to be truth in advertising here. For me I won’t use it for 3” and burn those in my fireplace. The chipper was very well packed with parts separated by Styrofoam so nothing could move around. It would help if you had a second person to unpack and assemble but I managed this alone. Assembly instructions are a series of pictures and the assorted hardware (nuts, bolts, cotter pins) is separated into zip lock bags which correspond to each assembly step. One criticism is there is no clear indication which side of the pieces to be joined to insert the bolts in but this can be figured out by looking at the preassembled parts or seeing where you can get sockets or wrenches in place to tighten them. All nuts and bolts are 13mm or 10mm. The nuts have to be driven onto the bolt so they lock in place. Just to be sure I added some thread locking liquid. Another criticism is how the wheels are joined to the main unit. The latter consists of the engine and the flywheel and is very heavy. The instructions (step 3) show the wheels being placed by lifting the unit up while sliding wheels under and inserting bolts and nuts. Impossible for one person to do and awkward for two. What I did was turn the unit 180⁰ so it is resting on the engine and then the wheels can easily be attached (see picture). Finally, the handle is difficult to attach to the hopper since the heads of the nuts or bolts disappear into a recessed slot as they are tightened leaving nothing to grab onto on one side. Still this doesn’t have to be very tight. I used a skinny bicycle open end wrench allow me to get these tight enough. Once assembled, oil (15W-40, an odd choice and difficult to find) has to be added. This can be done on either side of the engine. One side has an oil fill fitting and the other a port for the dip stick. It is actually easier to add to the dip stick port since it is more accessible. The manufacturer provides a nice funnel with an angled tube which is very convenient. There are also two oil drain holes one on each side. My guess is that this engine is used in many applications so whichever is easier to get at can be used. The air filter is the foam type which has to be soaked in oil and then wrung out. This has to be done before using. Starting the engine is relatively easy if somewhat awkward. One has to put a foot on the front support bar and pull up. There is more force required than I anticipated but it started right up. For its first use I had a mix of apple, cherry and white pine branches. It handled all of these fine up to about 11/2” diameter an up to 6 or 7’ long. For 2” diameter the engine would bog down but still do the job. I would not use this for anything larger. There were no problem with jamming. Very small side branches may not be grabbed if very short but just using another longer piece or a stick to push down does the trick. You don’t have to remove every side branch just those that don’t bend easily. I was impressed with how quickly it devoured my wood piles. In summary this is a great machine for up to 2” diameter branches, makes a fine mulch, is well made and does everything you can reasonably expect from 7 HP. ... show more
Reviewed in the United States on May 9, 2023 by Roger Roger
    • Well built and works as advertised.
Review Image by Mark Johns Mark Johns
This is the second "made by EFCut" chipper I've had. Bought the EFCut C30 mini in March of 2022 and it worked well until somehow I burnt the motor up. Bought this one a week ago and have used it once. It is made by the same company (efcut.com). So far so good. It is performing well as I thought it would. It chips well and as long as I dont try a feed something bigger than 2 inches does not bog down or stall. Anything over 2 or 2.5 inches will cause the motor to bog down so I have to feed those in slowly. It is well made and easy to assemble with labeled packets that correspond to the assembly instructions. It is a bit larger than the C30 I had even though it is the same size motor and chipping blades. It is bit harder to start than the C30. Takes a few pulls. I like where the fuel shut off valve is located. Easy to get to. Like the C30 I had, the sticker for the choke is backward. "On" is really off (choke open) and "Off" is really on (choke closed) but that's not a big deal. The rope pull is in a precarious position. The rope drags across the fuel shut off valve and the Fast/Slow lever. It also pulls toward the exhaust muffler so you have to be careful and not get burned. Fortunately I was able to remove the rope pull assembly (3 bolts) and rotate it clockwise so it pulls away from all of that. Problem solved. Would I buy this again? If it last longer than the C30 did then Yes, I would. ... show more
Reviewed in the United States on July 18, 2023 by Mark Johns Mark Johns
    • This machine works really good
Review Image by Mark Mark
Review Image by Mark Mark
Great little wood chipper !!! I really like how easy it is to move it around . It's lightweight , chips really well on 2.5 inch branches & smaller , I like how the branches pretty much feed themselves in once the cutter grabs the branch & make sure your branches are straight as much as possible so it will go into cutter .... If you try & put 3 inch branches in , you must take your time & feed the machine real slow so the engine won't stall . I started it on 2nd pull , on the branches 2 inches or less its a beast ... it tears up the 2 inch branches great for a 7 hp engine . I was chipping in the backyard which is sloped so I noticed the engine was starting to shut down , so I leveled the chipper & then it was fine . It has a oil safety feature to shut the engine down if it senses there isn't enough oil , so since the machine wasn`t sitting level it would start to shut off . This S1 chipper as 11.8 inch cutting rotor with 2 blades & 6 hammers for turning out smaller chips . This machine is so much better than the Brushmaster I use to have that had a 15 hp engine , that machine was too heavy ... But if you buy this , I think you will enjoy it . I wish Efcut had other colors for the S1 , there other machine they offer the efcut C30 is basically the same machine , just painted orange ... overall I think the machine is great for the price . I got it with a $50 coupon which was nice . it was pretty easy to assemble as well . The owners manual shows you which bolts go where . there is several bags of bolts & nuts . The bigger bolts & nuts go for wheel assembly bracket & the chute . the smaller 4 bolts & nuts are for your handle . Enjoy it if you buy it ... show more
Reviewed in the United States on February 9, 2024 by Mark Mark

Can't find a product?

Find it on Amazon first, then paste the link below.