Fleck 9100 SXT Metered Dual Tank Softener 24/7 Soft Water (32,000 Grain)

How the Twin-Tank 9100 SXT DuraWater Softener works. Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water back washes all the brine water out, leaving the tank ready for service. 24/7 Soft Water In Your Home or Business. Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100 valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. Two loaded mineral tanks with high capacity resin. *** Fleck on demand metered 9100 sxt dual tank control valve. Brine tank with quick connect safety float. Tank colors black. Threaded bypass for easier installation. ***Loaded up to 64k units. 64,000 grains and above ships partially loaded. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary and uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.* * Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. How the Twin-Tank Softener works. Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water back washes all the brine water out, leaving the tank ready for service. Special Note- Due to manufacture availability Tank color may vary. Comes standard with 3/4" & 1" yokes. Space saving turbine meter, monitors water usage to keep the water softener and optimal efficiency.. A True Blue Certified Pentair Fleck Dealer. By professional water treatment specialist with over 50 combined years of experience. We love to help our customers and will be just as friendly and helpful for the life of the unit! We love to help our customers!