ELEGOO Rapid PETG Filament 1.75mm Bundle 4KG, High Speed 30-600mm/s 3D Printer Filament Accuracy +/- 0.02 mm, 1kg Cardboard Spool(2.2lbs), Fits for Most FDM 3D Printers(Black, White, Blue, Red)
Condition: New
Buy Now, Pay Later
As low as
$8.16
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Jul 22
Recently Viewed
Color: Black,white,red,blue
Features
- 30-600MM/S PRINTING SPEED: With enhanced fluidity, ELEGOO RAPID PETG filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- BETTER LIGHT TRANSMITTANCE: Rapid PETG has good light transmittance, less warping and low shrinkage compared to pla. Any parts that involve light diffusion is an ideal use of PETG
- GOOD TOUGHNESS & EASY TO USE: PETG combines the best features of ABS and PLA, its as easy to print as pla, and has similar strength compared to ABS. Durable, flexible, highly impact resistant and odorless, ideal for printing daily necessities
- LESS-TANGLE & NEATLY WOUND: Full mechanical winding and strict manual inspection ensures that all rapid petg filaments are neatly wound, effectively reduces tangles and snap issues. Please use it as soon as possible after unpacking, dry it completely before using again
- FIT FOR HIGH SPEED PRINTER: Fit for both regular printers and high speed printers, perfectly for most 1.75mm printers such as Neptune 4, Neptune 4 pro/plus/max, K1 series, Ender 3 V2, Kobra 2 series, M5, M5C and more
Description
. Centauri Carbon Neptune 3 Pro 3D Printer Filament Storage Kit Rapid PLA Plus Filament Rapid TPU Filament ABS Filament ASA Filament Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store ELEGOO develops the high quality, cutting-edge and user-friendly 3D printers, and provides the dedicated servce in the consumer 3D printing industry. At ELEGOO, we go beyond being a 3D printer company. We recognize the crucial role businesses play in fostering a sustainable ecosystem. We believe in the power of innovation and sustainability to shape a better world.
Brand: ELEGOO
Material: Polyethylene Terephthalate Glycol
Color: Black,white,red,blue
Item Weight: 4 Kilograms
Item Diameter: 1.75 Millimeters
Brand Name: ELEGOO
Manufacturer Part Number: US-EL-3D-PHE12
Unit Count: 141.09 Ounce
Manufacturer: ELEGOO
Number of Items: 4
Item Weight: 4 Kilograms
Item Diameter: 1.75 Millimeters
Material Type: Polyethylene Terephthalate Glycol
Color: Black,white,red,blue
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Jul 22
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Black & White
This filament has been such a great experience after getting retraction worked out! prints very smoothly and is able to be printed at high speeds! i currently have been printing with it at 1mm retraction (direct drive extruder) 300 mm/s 260 degrees C and have had fantastic results! supports break away easy but the parts themselves do not break! i printed a sheet roughly 3" x 4" just to see how far i could bend it without it breaking and i was actually able to fold it in half without it snapping in half! i then tried to continuously bend it back and forth to see if i could get it to tear or beak and it still wouldn't! i am extremely happy and impressed with this PETG as i have mainly only printed in PLA, but it is safe to say im probably never going back to PLA and this is going to be my go to company to get my materials from! With how bad of a name PETG has for stringing, the stringing that i have is extremely minimal, thinner than a strand of hair strings here or there but not all over the place or at every move like ive seen soooo many videos have happen with various brands of course. those little strings are easily fixed with a quick wave over the stove at low heat and then you are left with perfectly printed parts that feel even more smooth with a slightly more glossy finish! i HIGHLY recommend ELEGOO's RAPID PETG filament! after my first spool used i have been hooked and have ordered more spools in various colors and cant wait to try them! Again I am extremely satisfied and very happy with the affordability of the filament, the speed you are able to print, the strength of the prints, the finish of the prints, and the stringing is a very negligible amount as to not be concerned with! ELEGOO has earned my business! my ONLY complaint is there is a limited amount of colors currently available and i really hope to see more variety with colors which i hope include color shifting, glow in the dark, and glittery styles! Thank you ELEGOO again for making this filament so easy and quick to work with! the bigger tube object is a fully 3D printed lamp i am currently working on, printing the led tube / lamp shade piece in white! and will be adding that to the photos after it is complete! Again THANK YOU ELEGOO for making such a great filament that is able to handle higher speeds and is VERY durable!
...
show more
Reviewed in the United States on February 10, 2024 Reviewed in the United States on February 10, 2024 by Amazon Customer
Color: 4*1kg Black
This has saved me many hours due to the print speed. It adheres to the plate well during printing but releases easily and cleanly when it's done. There is occasional stringing, but so far only because I haven't dried it fully before using. I see the cardboard spool as a plus, even though it can get damaged/bent/warped on occasion. I use a universal spool adapter that attaches to the core instead of snapping on to the outside, so that's rarely an issue. I'd much rather toss the cardboard into the recycle bin than have to deal with the "refillable" spools that have caused me nothing but grief. This is a great filament, and I've been gradually replacing all of my PETG with this when I run out.
...
show more
Reviewed in the United States on May 7, 2026 by Glarghk Guhl Kashmas'nik
Color: Black, White, Gray, Transparent
I am not disappointed by this, but I would instead pay the extra and get the Polymaker PETG in the future. However, if you are price sensitive, this can be dialed in to get some good results. The usual things: Spooling quality: Good. Consistent. Cardboard rolls: Wonky. Some deformation on them. Moisture out of the box: Consider it wet and will need extensive drying. Both owing to the cardboard and the fact that the homeopathic amount of silca pellets do nothing. Ease of use: No issues in AMS. No print profiles in Orca. Had to manually dial this in. I tried several defaults and was not happy with the results I got, especially with the .6mm nozzles. In the end, I spent the most effort and time getting the clear to work the best. I found that the clear works very well, has a maximum flow rate far in excess of what my printer can do. On flow rate tests, I was able to fully max out the printer's volumetric speed (~25mm3/s) which is far lower than what the product states it can do. You should spend the time calibrating the colors differently than the clear as the clear is essentially pure PETG vs the colored filaments having other additives in them that will affect print quality and speed. This will take a few hours but if you plan on using this routinely owing to the price, will pay dividends. I found that higher print temps (260-275C) and lower bed temps (about 10C lower than other PETG) achieved good bed adhesion. I used very little cooling on my prints, zero part cooling for clear. The bed adhesion was excessive IMO to the point I was worried about damaging the print bed using the standard 70C bed temps common to other TPU. 50C on the cool type plates, 60 or 65 on PEI, and 65 or 70 on the smooth PEI with glue. You will never get good advice on print settings in Amazon comments and this is no exception. But here's some settings you can use for a .6mm nozzle and then fine tune: Flow .98 Pressure advance .04 Enable pressure advance Retraction .4mm - .5mm Either disable z hop or use spiral z hop. Disable wipe whilst retracting 265C print temp Avoid crossing walls If you want the best clarity using clear, this is a whole other story and takes a good bit of patience and work: 275C print temp 125% nozzle diameter for line width. 1.01 flow ratio. Zero retraction. 10mm/s line speed (way slower) All line speeds equal (e.g. outer walls same) Either no infill or solid infill. Reduce accelerations significantly. Zero part cooling unless absolutely necessary. In other words, kind of like how you'd print TPU.
...
show more
Reviewed in the United States on January 1, 2026 by Diabeetus
Color: 2*1kg Black
Idk what's in this stuff to make it able to perform as well as it does when printing, but it's magic. For most cases, printing PETG at speeds much faster than about 60mm/sec can be a mixed bag in terms of quality and reliability. Somehow this breaks that. I own a Creality K1 and I've been using this for a little over a week. Tldr: it's quickly taking over PLA as my favorite material to print with. Printing will be tad slower than with PLA in my experience, but that's not really saying much. It's no secret that max printing speeds are mostly marketing and have very specific conditions under which they are achievaby. That being said, I still routinely get very consistently good print quality at 250mm/s wall speed with .45 width and .2 layer height(part of my personal standard profile). Flow seems to hold fairly steady at those high speeds as well. In my own limited testing, this material was able to comfortably perform at about 2/3 the flow rate vs that of PLA, comfortably reaching ~ 22mm/s³ @ 260c with the K1's stock extruder and copper/hardened steel Nozel. As you may gather, an all metal Hotend is recommended to get the most out of the material. Higher flow rates did appear possible per testing, however I found the above rate to be very safe for my purposes. Mechanical properties are not as easy for me to describe here, but the best I can say is it still retained the "feel" of other PETG. Most importantly, it retained it's "bend, don't snap" properties that you look for from PETG, preserving it's safety for functional parts over PLA. As far as a summary for how to plug this into your slicer, pretty much just set temps to as high as you would for normal PETG and print it with about 2/3 the speed/volumetric flow rate as PLA. This filament likes more cooling than normal PETG, but still less than PLA. A max of 90% fan speed for tricky portions with the fan always on at least 20% while printing normally will serve you well. Retraction may need to be turned up a tad vs PLA, about .8-1 mm, but even with the same settings as PLA, only the tiniest of plastic whispies were visible. Pressure Advance is an interesting one. This material has similar PA values as that of PLA, .06-.04. However, you should absolutely calibrate this one yourself, as I've seen wildly differing reports for this. An enclosure is recommended, but I have seen no significant warping risk, even on large parts as compared to normal PETG and PLA. I'm genuinely impressed by this material, and with it being the same price or cheaper than a lot of other PETG, I'll Absolutely be buying again. I would appreciate more colors to be available for this material, but that's a small gripe compared to how stellar everything else is about it. If you're on the fence about adding this to your cart vs other PETG, let my review be what persuades you. Great value, great performance. No complaints except for variety. Definitely worth a try.
...
show more
Reviewed in the United States on March 9, 2024 by Chanman
Color: 2*1kg Black
This is my first experience using PETG on an Ender 3 V3 KE. The filament requires some initial calibration time, but once the settings are properly adjusted, it prints well. It was necessary to use higher nozzle and bed temperatures, lower print speeds, and fine-tune the flow, since higher values tend to cause material buildup on the nozzle. It is not an ideal filament for high-speed printing. Even with proper settings, retraction still produces some stringing, which is typical for PETG. It is also very sensitive to moisture, so keeping the filament dry is essential for good print quality. Overall, it is a good filament if you are patient with calibration and print at moderate speeds. Recommended for users with some experience.
...
show more
Reviewed in the United States on January 26, 2026 Reviewed in the United States on January 26, 2026 by CAMILO
Color: Yellow,orange,green,blue
Very good quality. Good for fast 3D printing. Easy to setup. Value for the money. I would buy again for my 3D prints. PETG is one of the strongest materials for 3D prints. Good for keychains or anything that would be exposed to sunlight and works better than PLA. I got several 3D printers and prefer PETG over PLA and also very good for fast 3D printers. You wont be dissapointed.
...
show more
Reviewed in the United States on June 20, 2026 by Jorge O.
Color: Beige & Brown
Used this on a Bambu P1S with generic PETG settings to print outdoor shade clips I designed for Coolaroo shades, and it performed flawlessly. I didn’t have to slow anything down or tweak settings—just loaded it and ran. Layer adhesion is strong, and the parts feel durable enough for outdoor use where they’ll see sun and some stress. The beige and brown colors both came out clean and consistent with no weird shifts or dullness. Surface finish is solid for functional prints for sure. No stringing issues worth mentioning, which is usually where PETG can get annoying. This ran as clean as most PETG I’ve used. Only thing to watch is typical PETG behavior, so make sure your cooling and retraction are dialed if you’re pushing speed. That said, with default Bambu settings, it was basically plug-and-play. Bottom line: if you’re running a Bambu and want a PETG that can keep up with faster prints without constant tuning, this is a strong option. I’ll be buying more for functional/outdoor parts.
...
show more
Reviewed in the United States on March 29, 2026 Reviewed in the United States on March 29, 2026 by Travis W
Color: 4*1kg Black
Mixed results on my Snapmaker U1and FlashForge AD5X. Surface bumps, some warping, and bed adhesion failures. Raising the bed temp to 85/90 helped. The surface bumps are random and occur even after drying the filament. Sunlu and other PETG filaments I use have no such bumps. Granted, the Eligoo is a high-flow, fast-print, and the others I use are just regular PETG. One redeeming characteristic is the low price. If Pristine Cosmetics are not critical and you want a cheap, serviceable, fast printing PETG, then it may work for you. Judging from the positive reviews, my results may not be typical. There are too many confounding variables between environment, printer configuration, and operator experience to say yes or no to Eligoo's Rapid PETG.
...
show more
Reviewed in the United States on May 16, 2026 by Spylake