BIQU CryoGrip Pro Glacier Panda Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Double-Sided Fine Textured Spring Steel Sheet, Firm Adhesion, 257x257mm, 1 Piece
Condition: New
Buy Now, Pay Later
As low as
$7
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Dec 14
Recently Viewed
Size: 257*257 MM
Style: CryoGrip Pro Glacier
Features
- Unmatched Adhesion BIQU CryoGrip Pro Glacier Panda build plate highly surpasses traditional PEI steel spring sheets as per prints adsorption with PLA and PETG filament. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off. We recommend a low temperature setting of 45-55C for PLA filament, and 60-75C for PETG.
- Bambu-Lab Build PlateGlacier build plate is compatible with Bambulab P2S/ P1S/P1P/X1C/X1E/A1 3D printers. Please disable the Build Plate Detection feature in your slicing software when using it on P2S. The 7-layers design and unique polymer material of the CryoGrip Pro Glacier help to realize low temperature printing with firm adhesion. It ensures warp-free printing of PLA & PETG, allowing you to keep the auxiliary fan on and eliminates concerns about drafts affecting your prints.
- Filament CompatibilityThe CryoGrip Pro Glacier spring steel sheet is an all-rounder plate for different filament exploration. It excels at printing PLA, PETG, ABS, PA and other engineering materials, and is compatible with all materials with nozzle temperatures below 300C. It performs much better in printing adhesion with most engineering materials than PEI build plates, but not as excellently as CryoGrip Frostbite plate with PLA and PETG.
- Heat Insulation Handle The sleek honeycomb handle design of our Glacier Panda build plate insulate heat from the print area. The temperature in the handle area remains low enough to touch even the heat bed temperature is 100C, enabling immediate print removal with no more wait for the plate to cool down. Keep your projects moving smoothly and no more burning fingers!
- Unique AR-codePackage comes with a sheet of customized AR code stickers that are made of Hi-Temp base material. Choose your own AR code according to the material that you print most often. It is use to ensure Glacier panda build plate can be recognized by the X1C, eliminating setup errors for a hassle-free printing experience.
- Easy to Clean Use only water and soap, or alcohol to clean the build plate surface. With our self-recovering coating, a simple wipe will restore its adhesion, ensuring confident performance every time. BIQU Bambu-Lab build plates also enable easy prints removal. Slightly bend the surface of the build plate, then your prints will detaches cleanly, no need of any scraping or prying tools.
Package Dimensions : 11.26 x 10.35 x 0.43 inches; 14.39 ounces
Date First Available : October 7, 2024
Manufacturer : BIGTREETECH Direct
Best Sellers Rank: #2,322 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #15 in 3D Printer Accessories
#15 in 3D Printer Accessories:
Customer Reviews: 4.4 4.4 out of 5 stars 532 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Dec 14
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 257*257 MM
Style: CryoGrip Pro Frostbite
Absolutely amazing build plate! I've had around 30 or 40 over the years of different types, and this one is the best. For PLA and PETG variants, no glue and no worries. I'm planning on getting the other models offered soon.
Reviewed in the United States on August 4, 2025 by 3D print nerd 3D print nerd
Size: 250*250 MM
Style: CryoGrip Pro Glacier
I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain. When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course). According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints. This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates. I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.
...
show more
Reviewed in the United States on April 23, 2025 by Geanie
Size: 184*184 MM
Style: CryoGrip Pro Glacier
Unbelievable performance. Such a game changer moving from the textured PEI plate the printer comes with. No more warping issues, stuff sticks while it's printing and comes off easy when it cools. Fits the printer perfectly, and the "handle" portion with the holes and stuff is always comfortable to grab.
...
show more
Reviewed in the United States on September 5, 2025 by M. Sweeney
Size: 257*257 MM
Style: CryoGrip Pro Glacier
This CryoGrip build plate certainly lives up to the hype. It has great adhesion, almost too great. Some prints really just do not want to let go of the plate. It does seem to need some adjusting the build plate temp to a lower heat but works great at a variety of temperatures. The size of this plate is perfect for my X1C and my Elegoo CC.
...
show more
Reviewed in the United States on September 4, 2025 by Marc
Size: 235*235 MM
Style: CryoGrip Pro Glacier
In my search to find a smooth build plate that wasn't a pos, I came across this brand and I am not disappointed at all. The adhesion level is amazing and doesnt require adding anything to the plate. The quality seems to be there as well since I have not destroyed it yet and previous brands I have tried were destroyed within weeks. This plate fits my AD5M perfectly and there is no need to install the bracket on the front of the plate that flashforge plates require. It is easy to clean with soap and water or IPA 91% as needed. It works just like the stock plate to put it on and take it off. And the blue color just looks great
...
show more
Reviewed in the United States on August 9, 2025 by Patrick
Size: 310*315 MM
Style: CryoGrip Pro Frostbite
The Frostbite does adhere better than the Glacer, but they do have their quirks to get working. I had zero luck using either as a cold plate. What worked for me was elevating the first layer Temp. A big concern I had was the Frostbite started to adhere to the magnetic surface. It released but it was a scary moment. I don't know if there's a temperature where it fully adheres and don't intend to find out. Garolite is the best build plate I've found so far and is not fussy about what material you use on it. My take is skip this and try Garolite.
...
show more
Reviewed in the United States on October 12, 2025 by L T Harris
Size: 257*257 MM
Style: CryoGrip Pro Glacier
Great plate and it performs well way better than the stock A1 plate 2 things 1 wait until it cools to remove the print (you can put it on the floor or counter to make it cool faster) 2 there is some strange wear on the back of the plate my printer now thinks there is no plate there so I had to flip it over (see photo) This was after about 2 months of light use and until this the experience has been amazing
...
show more
Reviewed in the United States on October 3, 2025 by Daniel E Daniel E
Size: 235*235 MM
Style: CryoGrip Pro Glacier
I have tried many different print beds for my modified ender3v2. Several PEI sheets of different textures, and the glass plate it came with. This has become my goto print bed. Many of the PEI sheets are flimsy on purpose so you can bend the plate to pop the part off, but this still allows that while having enough rigidity that it stays consistently flatter across the surface when doing a mesh level. I rarely have issues with prints not sticking when doing PLA/ PETG/ TPU. The added bonus of being able to run the build plate cooler is just the cherry on top honestly. I get that printing takes forever, but most of your prints are going to fail in the 1st 5ish layers, and stopping it to fix it and then start the bed heat again is just time consuming and frustrating. You would be surprised how much less time it takes to heat the print bed with it being 10c lower. The texture is what I would call just right. Its not butter smooth like glass, but it doesn't leave the orange peel texture like many PEI sheets do. Its super easy to clean with a little iso alcohol. If you are upgrading an Ender with a glass plate you'll probably end up buying enders PEI sheet to get the magnetic sticker thing you will need for this.
...
show more
Reviewed in the United States on September 19, 2025 by benson benson