BDF S15 Window Film Daytime Privacy and Heat Control Mirror Silver 15 (Dark) - 60in X 25ft

Features

• EXCELLENT DAYTIME PRIVACY. Provides great intended privacy during daytime only; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the mirror-like appearance.
• DARK AND REFLECTIVE silver finish to create a mirror-like appearance while reducing cooling costs, especially during the summer, through effective heat rejection. Also blocks 99% of UV rays, minimizing fading on furnishings caused by the sun.
• STRONG ADHESIVE protected by release liner. For easier installation, use A LOT of soap/water mixture to soak both the adhesive side and window.
• HIGH QUALITY PERFORMANCE FILM that is sensitive by nature. Please take caution when handling the film as the slightest fold may create a permanent wrinkle.
• FREE TOOLS AND EASY INSTALLATION GUIDE to make installation DIY-friendly. Make sure the window surface is completely clean and absolutely free of any blemishes.

Description

BDF is a premier window film company that offers a wide range of high-quality and stylish window films to customers. We have various types of window films can provide practical solutions for window-related needs, such as sun control, enhanced daytime privacy, security, decoration, opacity, and protection from UV rays. Our window films in various colors and appearance can add elegance and sophistication to your home or office. An excessive amount of water solution (16 oz. water + 8 drops liquid soap) will make handling the film easy. Spraying soapy water on the adhesive as you pull off the liner will prevent the film from being too sticky. To remove the liner, use two pieces of tape, attaching them to a corner (one on each side, facing each other). Press the tapes together, and then slowly separate the two pieces. The films are installed inside unless the film is specified as "exterior film". Promote serene lifestyle Create a mirror-like appearance outside during day while reducing cooling costs during the summer. DAYRIME PRIVACY WITH VIEW Prevent onlookers from looking through your window while maintaining visibility from inside. KEEP YOUR LIFE COOLER Reducing cooling costs during the summer through effective heat rejection film; up to 79% reduction. Same film the PROs use We wanted to bring the same films that professional window film installers use, to the public. Right tools for the job The squeegee and blade are designed to be effective and easy to use for both pros and DIYers. The S15's silver-tone metalized reflective nature gives it an excellent heat-rejecting rate of up to 79% which keeps the interior of your home or office building nice and cool. This helps maintain your room at a cool, moderate temperature, resulting in lower cooling costs. S15 window film provides an excellent UV-blocking barrier. Being exposed to UV rays can cause skin problems such as premature aging skin and signs of wrinkles and eye problems. The S15 film rejects about 99% of the UV rays, helping to reduce fading on your precious furniture, and pictures. The effect of any daytime privacy window film will greatly depend on the lighting conditions, because the side of the film exposed to more light will become more reflective and harder to see through. This is why the privacy effect works so well during the day, and almost not at all at night. Our products come with tools needed to get your job done, and an installation guide is included to help you with a smooth installation process. With the right amount of care, practice, and patience, both installation and removal of the film should be simple and easy. BDF S15 SILVER BDF S03 SILVER BDF S05 SILVER BDF S35 SILVER BDF S60 SILVER BDF BRZ20 BRONZE We provide tools and information to help make the DIY work easier. The video guide shows an overview of the installation steps. Reviewing and following the proper steps allows a clean and smooth application process, so that you can then enjoy the benefits of the newly installed window film - whether it is the energy efficiency made possible by a sun control film, the added protection and peace of mind of a security film, or the stylish aesthetics of a decorative film. We provide tools and information to help make the DIY work easier. The video guide shows an overview of the installation steps. Reviewing and following the proper steps allows a clean and smooth application process, so that you can then enjoy the benefits of the newly installed window film - whether it is the energy efficiency made possible by a sun control film, the added protection and peace of mind of a security film, or the stylish aesthetics of a decorative film. Using an excessive amount of water solution (16 oz. water + 8 drops liquid soap such as baby shampoo) will make handling the film easier. Spraying water solution on the adhesive as you pull off the liner will prevent the film from being too sticky. This will also reduce or eliminate the potential for wrinkles and bubbles during installation. Once the film is properly placed on the window, the soapy water should be pushed out using the squeegee with appropriate pressure applied. Attached to the film is a clear layer called the backing liner. This layer covers the adhesive or cling side of the actual film layer; the liner needs to be removed when you install the film. The best way is to use two pieces of tape on a corner (one on each side, facing each other). One piece would grab onto the film, and the other onto the liner. Press the tapes together, and then slowly separate the two pieces to pull the two layers away from each other. Static reaction happens when the backing liner is taken apart from the film. It may cause the film to stick to itself, which makes that film useless. To prevent this, spray the soapy water solution as you carefully pull off the backing liner. The window surface should also be sprayed with plenty of the soapy water. This can be used to clean the window before applying the film, and allows you to move the film around on the window without it getting stuck on the surface. A daytime privacy film can prevent onlookers outside from seeing in while retaining view from inside during the day. The effect will depend on the brightness on each side: the space that has more light can be seen through the film from the other side, whereas the film conceals the space that is darker. This is why the privacy effect works well during the day, since the sun usually makes the exterior of your building brighter than the interior. Curtains or blinds will be needed for nighttime. Why does the film not stick to the window? / Why did the film fall off from the window a few hours later? There is a clear "backing liner" layer attached to the actual "film" layer. The backing liner covers the adhesive on the film so that the film does not prematurely stick. When you install the film, the backing liner needs to be peeled off from it. Can people see in at night? / Why is the interior visible from outside during nighttime? If lights are on inside, the interior will be visible at night because it is brighter. Curtains or blinds can be closed at nighttime to block view. (During daytime, you can see out while having privacy from outside due to the sunlight outside.) Why are both sides silver? / Why is there reflection from inside? The film is silver on each side, but reflection is more apparent from the side having more light. This is why during daytime, the film looks like a mirror from outside while allowing view from inside. This is reversed at night with lights inside. Why does the window feel warmer after the film has been installed? This is an expected result. The window with the film installed feels warmer because the film stops some of the heat. If the film is not there, the heat felt on the window would instead enter the room. Why did bubbles (or spots where film is not adhering properly) form after the film was installed? This is due to the moisture left inside. The film may appear fine when installed, but afterwards, the water can interfere with the adhesive and cause bubbles to form. Apply firm pressure with the squeegee and push out the water to prevent bubbles.

Material: Polyethylene Terephthalate (PET)

Brand: Buydecorativefilm

Color: Silver

Size: 60in X 25ft

Product Dimensions: 300"L x 60"W

Installation Type: Peel & Stick

Ultraviolet Light Protection: Yes

Number of Items: 1

UPC:

Manufacturer: Buydecorativefilm

Brand Name: Buydecorativefilm

Number of Items: 1

UPC: 810203024327

Manufacturer: Buydecorativefilm

Unit Count: 125 Square Feet

Model Number: CSRSI1536100

Manufacturer Part Number: HM-12116

Material Type: Polyethylene Terephthalate (PET)

Color: Silver

Ultraviolet Light Protection: Yes

Size: 60in X 25ft

Item Dimensions L x W: 300"L x 60"W

Installation Type: Peel & Stick