Anycubic Kobra 3 V2 Combo 3D Printer, Smart Multicolor Printing Up to 600mm/s Print Speed, Active Filament Drying Enhanced Auto-Leveling for Higher Success Rates, 10.0'' x 10.0'' x 10.2''
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 10 left in stock, order soon!
Arrives
Thursday, Jul 23
Recently Viewed
Features
- Amazing Multicolor Printing1x ACE Pro Enables 4-color printing, 2x ACE Pro + 8-Color Filament Hub Enables 8-color printing
- Top-of-the-line Nozzle TechnologyAnycubic Kobra 3 V2 Combo is equipped with the same advanced nozzle as the Kobra S1, significantly reducing the material leakage during printing, making the surface of the model smoother and enhance its exquisite appearance
- Active Filament Drying for Optimal Performance Adjustable Drying Temperature (35-55C), maintains the filament's ideal printing condition for optimal printing results. It supports continuous operation for up to 24 hours without the need to purchase additional filament dryer box, providing you with printing convenience
- 600mm/s Higher Printing SpeedAt speeds of up to 600 mm/s, Anycubic Kobra 3 V2 Combo sets the standard for high-speed printing. Max acceleration is 20,000mm/s. Recommended speed is 300mm/s. Compared to regular FDM 3D printers, the speed has improved 12 times, and it just only takes 11min30s to print a boat. Faster speeds help you save valuable time
- Comes Standard with a 720p CameraWith a high-definition camera that offers 720P video streaming, you can now monitor your printing progress anytime, anywhere, and share your time-lapse recording of the printing process.
Description
Anycubic Kobra 3 V2 Combo Anycubic Kobra 3 V2 Anycubic Kobra S1 Combo Anycubic Kobra S1 Anycubic Kobra 3 MaxCombo PLA Filament 2KG PLA Matte Filament Anycubic is a famous consumer-grade 3D printing manufacturer specializing in delivering quality 3D printing products. Featuring a professional R&D team and high-end innovation technologies, we could make 3D printing more accessible to meet the demand from 3D professionals and amateurs alike. We are passionate about providing effective 3D printing solutions to unleash your creativity and help you push the limits of what's possible. Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store A more comprehensive range of high-quality products at competitive prices To meet our users' various needs, we provided multiple options. So You can always find your suitable 3D printers in our stores whether you are a 3D printing beginner or a professional. We believe there's an innovator in everyone. We are passionate about helping you transform your ideas and creativity into reality and making you enjoy the freedom to create with 3D printing technology.
Brand: ANYCUBIC
Material: PLA, PLA+, TPU, ABS, ASA, PETG、PA、PC、Matte PLA、Silk PLA
Color: black
Product Dimensions: 8"D x 8"W x 8"H
Compatible Devices: Personal Computer
Product Dimensions: 21 x 19.6 x 19.25 inches
Item Weight: 35.9 pounds
Item model number: Anycubic Kobra 3 V2 Combo
Date First Available: May 21, 2025
Manufacturer: ANYCUBIC
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Thursday, Jul 23
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
My perspective is coming from several years of using 3D printers, but mostly entry-level printers (prices in the low hundreds of dollars). At the time of writing this review the Kobra 3 V2 has only been out for a couple of months. We got a Kobra 3 V2 Combo at work when the pre-order price was $379. We've used it for a little over a month and I liked it so much that I decided to buy one for myself. Obviously prices change over time, but it appears the current typical baseline price is $399 (regardless of what websites say is the full price). The lowest I've seen the price is $350. At $400, I would say this is a good setup. But if you can buy it on sale, I'd say it is the best bang for your buck. Highlights: -Great value for what you get: fast, reliable printer + multi-color/multi-material printing + filament dryer -In general the print quality is great. I have had some challenging prints fail, so it isn't a miracle worker, but for typical prints that are well supported I haven't had any issues. -I've used the faster "sport" mode printing speed and I was surprised that the quality still looked good. But that could be geometry dependent. -I've used dissolvable filament (PolyDissolve S1 PVA) in the ACE Pro to make dissolvable supports. It fed through the ACE just fine. Print results were acceptable. You have to tune the settings for the dissolvable filament, and it is hard to purge enough volume so you don't get any discoloration or swelling of the print itself after soaking the print. -Wireless printing without having to create or sign into an account (LAN mode). Cons: -It comes with a camera and it works, but the image quality and default location is not that great. -It cuts and retracts the filament after each print, so even if you don't change colors between prints you will be wasting a small amount due to purging as it loads the filament. -You need to create a way to catch the purge blobs or they will end up getting everywhere. -The ACE Pro is intended for plastic spools. Some cardboard spools seem to work fine, but others require printing plastic adapter rings otherwise the spool won't feed properly. As a side note, there was a mix-up with my initial order and Anycubic Customer Service did a great job of taking care of me. It is a little hard due to the time difference (from the US) so replies came in the middle of the night, but aside from that I had a very positive experience working with their customer service.
...
show more
Reviewed in the United States on July 25, 2025 by David
Being a part-time 3D printer enthusiast for many years, this is now my third printer and first from Anycubic. Right out of the box, with minimal setup and a quick firmware update on both the printer and ACE, it was producing excellent prints. No additional effort was needed on my part to calibrate or anything. Having previously only used ABS and PLA, this has many default profiles for many other filaments. I find PETG to be an excellent material that prints well and has great durability vs. PLA. Having the ACE be able to recognize NFR tags allows me to use one of the many tag writers to tag my various filament types and colors and have the ACE appropriately recognize and adjust accordingly. The combo is an excellent value to get into multicolor and high quality prints with minimal effort and cost. Printing is so easy I setup my kids with the app so they can choose and sent prints when its showing as available.
...
show more
Reviewed in the United States on September 14, 2025 by Tom Birkenbach
Great prints. Have had no issues so far with it
Reviewed in the United States on May 28, 2026 by Kendra wray
DO NOT BUY ANYTHING FROM ANYCUBIC, UNLESS YOU WANT A MALWARE DAMAGING YOUR COMPUTER. SO, I bought this 3D printer. It works fine. But this 3D printer comes with a USB flash drives in which you can find the Anycubic's software slicer to handle your 3D models... THIS USB COMES WITH A VIRUS THAT LEAVES YOUR PC FRIED. I ask Amazon to take responsibility for this cuz the seller responds "Typically usb flash drives do not cause damages to computers" as if im some kind of dumb who doesn't know what I'm talking about, and amazon won't give a solution after over a month of the claim. So, Do yourselves a favor and do not buy anything from them.
...
show more
Reviewed in the United States on December 1, 2025 by JuanK
The Ace Pro was defective. Anycubic support tried for a month to fix unit. Amazon customer service gracefully exchanged the Kobra 3 v2 Combo. I am very impressed with the new Anycubic Kobra 3 v2 Combo. This print is flawless.
Reviewed in the United States on March 18, 2026 by Moore
First time using a new generation printer - I come from the before-fore time when you had to level your own bed and test the flow rate by hand and wait long grueling minutes of just waiting for the hot end to heat up to temperature. This process took about an hour when just starting out and I was able to refine that process down to 20 minutes with practice. With this machine, all of that process is automated and takes less than 10 minutes. I just make sure the build surface is clean and I'm able to use the on board diagnostics to start the entire process. Then once I've calculated the flow rate for that spool, I never have to do it again until I change spools. Once the filament was calibrated, the print quality for the stock settings was immaculate. Size was an issue at first but was able to use the Anycubic app to find a mount for the Ace Pro system that moves it on top of the printer. And it all fit in my large enclosure that used to house my old printer. This system is the best bang for your buck when it comes to multi-color printing. Period. My only issue with this specific setup is that it cannot print TPU (flexible) filaments because the Ace Pro system requires a rigid filament in order to work; but it can still be done if you disconnect the Ace Pro system and use the stock single spool holder that also comes with this version as well.
...
show more
Reviewed in the United States on September 1, 2025 by The Master of the Universe
Never 3D printed in my life before I brought this 2.5 months ago and have been amazed at what you can do. There is a learning curve but it is not hard to navigate, I have printed things almost none stop, have I run into obstacles yes but most of them have been related to the 3D files downloaded and the slicing of them. As for the unit itself the only problem I encountered was feeding the filament into the Ace Pro which was easily elevated by just taking the time to make sure that I straighten about 6 to 8 inches of it and fed it in carefully, problem gone and solved. I have had zero problems with this unit and customer service on the help for the Ace Pro was spot on. As a first time user's, I recommend this unit, Go read some of the reviews on Youtube and such and find out for yourself, as for me, Santa is going to bring me another one than I will have two :-)
...
show more
Reviewed in the United States on November 7, 2025 by Steven E Hostetler
As a first-time 3D printing hobbyist, I’m impressed. The setup was quick and easy, and the printer’s build quality feels top-notch. It’s been a great experience so far, and I’m excited to start creating and printing more of my own custom designs. My main complaints are the fan running constantly (underneath, not the printing fan), very slow start times—though it prints quickly once underway—and the amount of filament wasted on multi-color jobs (which seems common across multi-color setups). I’ve learned it’s best to download the files you need, load them into the Anycubic slicer, and make adjustments there. Printing straight from Makeronline isn’t ideal. Most single-color prints don’t require much tweaking. Overall, I couldn’t be happier with this printer as my first step into 3D printing
...
show more
Reviewed in the United States on December 6, 2025 Reviewed in the United States on December 6, 2025 by Amazonian2005