ANYCUBIC 12K Resin 3D Printer, Photon Mono M5s 10.1'' 12K HD Mono Screen, 3X Fast Printing, Self-Leveling and Intelligent Detection, 7.87'' x 8.58'' x 4.84'' Printing Size
Condition: New
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Model: Photon Mono M5s
Features
- Smart Leveling-FreePhoton Mono M5s is the first consumer grade resin 3D printer without leveling. While printing, a mechanical sensor on the cantilever arm will detect the alignment between the printing platform and the floating leveling module, and automatically adjust it accordingly. After simple assembly, it can be printed directly, making 3d printing more convenient and efficient
- 10.1'' 12K ResolutionANYCUBIC Photon Mono M5s 3d resin printer adopts 10.1 12K LCD screen with a HD resolution of 11520*5120 and a high contrast ratio of 480:1, achieving a XY accuracy of 19 x 24 micro, making 3d printing details as precise as a hair thickness.
- 3X Printing speedCombined with Anycubic high-speed resin, Photon Mono M5s resin printer is able to reach an average speed of 105mm/h. The fast release film comes with the printer can reduce the release force during the printing process and assist in fast 3d printing
- Simple and EfficientBy utilizing auto device check and resin detection functions, anycubic 3d printer can check the exposure screen, mechanical detection module, motor operation status and resin allowance before printing, assisting printing to start smoothly. Besides, prints status detection feature will remind and smartly analyze the common bottoming-out printing failures, greatly reducing waste of resin and time and ensuring printing efficiency.
- Upgraded Slicing SoftwareAnycubic Photon Workshop 3.1 introduces the Intelligent Mode , which can match exposure parameters based on model details and size. The new support algorithm further enhances the printing stability and success rate. Realize one-click repair of damaged models,optimizing the speed of punching and slicing, making it easier to use slicing.
Brand: ANYCUBIC
Material: Resin
Color: Yellow
Product Dimensions: 11.41"D x 10.63"W x 18.11"H
Item Weight: 23.36 Pounds
Product Dimensions: 11.41 x 10.63 x 18.11 inches
Item Weight: 23.4 pounds
Item model number: Photon Mono M5s
Date First Available: May 18, 2023
Manufacturer: ANYCUBIC
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Model: Photon Mono M5s
Rating: ★★★★☆ (4.7/5) NOISY BUT EFFECTIVE The Anycubic M5S has been a fantastic addition to my workshop, balancing performance and ease of use. Here are the highlights: Print Quality: Impressive print quality with sharp details and excellent adhesion. It handles complex geometries effortlessly. Ease of Use: Almost ready to use out of the box. Simple assembly and intuitive interface, plus automatic bed leveling save time. Print Speed: Fast print speeds without sacrificing quality, enhancing efficiency in my projects. Connectivity and Features: Includes Wi-Fi and USB connectivity, with a useful print resume feature for power outages. Noise and Design: Modern design that takes up little space. It’s relatively quiet compared to other printers. Conclusion: The Anycubic M5S is an outstanding 3D printer that combines quality, speed, and usability. While it could be quieter, its overall performance makes it a great choice for beginners and experienced users alike. Highly recommended! PD: these are my settings to abs-like sunlu gray and dark gray.
...
show more
Reviewed in the United States on October 19, 2024 by Giann Giann
Model: Photon Mono M5s Pro
This resin printer was purchased as an entry level into resin printing, but it has turned out to be much better than we expected. This is used to make aerospace prototype parts and we are quickly looking into making production off it. Definitely a great value.
Reviewed in the United States on December 3, 2024 by Jamie D
Model: Photon Mono M7 Pro
A friend of mine has the same one and it’s so easy to use and can make some super high quality prints once the settings are refined!
Reviewed in the United States on January 15, 2025 by Josh
Wow... not sure what happened here. I have an Anycubic Photon that I have run thousands of prints on for the past 5 or 6 years with zero issues. This pile of junk however... where to start? First gripe is that the FEP film is not replaceable on its own. It comes on a carrier, which is good in principle, but the quality of FEP film installed is very poor and lasts less than 10 prints. There is a "counter" on the printer that warns you that the film should be replaced, but I have yet to have the FEP film last as long as the printer expects it to, I usually have to replace it 2-3 prints before the warning kicks in. The FEP replacements are expensive and not durable at all. The best deal is the 5 pack, which you get for about $30. If you don't replace the FEP film when it first starts showing wear, it will easily crack and leak, then you get the privilege of also replacing the screen cover if any resin gets cured on it. Secondly the LCD screen is garbage. I suspect that it is actually the printer controller more than the screen, but this thing is less than 7 months old and I have had the screen fail 3 times. I wonder if the insulation of the glass to liquid crystal is not sufficient to account for the heat of the UV curing process for the resin or if the machine controller itself causes the failure... not sure, but wouldn't recommend this machine regardless. Anycubic was nice enough to send out a couple of screens, but now customer service seems unwilling to make things right. The screens are lasting ballpark 20 prints before failure... Buyer beware on this printer. You will spend 2X the cost of the printer on FEP film and LCD screens very easily. Definitely spring for the extended warranty pr buy something better Another gripe is the file system... what is the deal with not allowing a file structure on this thing? You can't have files I'm folders to make it so that you font have to go through all the files to find what you saved... plus the file organization is random, so files aren't easy to find.
...
show more
Reviewed in the United States on March 18, 2024 by supernibs2000 supernibs2000
Model: Photon Mono M5s
My original review of this product was extremely negative. I have since gotten it to work with some assistance from the manufacturer and I feel like a revision is in order. My original printer's LCD screen protector sheet became "foggy" after several prints. No, I didn't spill resin on it! This caused nearly every print to fail and I only discovered the cause when I ran the LCD test and saw that only a little light was getting through the milky fog. Customer Service sent me several replacement screen protectors and I've since had no issues with them. First of all, this is a nicely-made printer with a lot of cool bells and whistles. The resolution is great and the price is competitive with other printers with similar features. If I had to name a favorite feature, it would probably be the vat-cleaning system. If your print fails and you have bits of model stuck to the film at the bottom of the reservoir, activate the cleaning system at the 30-second level and you'll have an easy-to-remove plane of cured resin that comes up with all of the failed model bits attached. I wasn't especially interested in the online controls but I fell in love with them after just a few uses. I keep my printer in its own isolated room away from people and pets so being able to start a print from my computer as soon as I finish slicing it is a nice treat. However, there is one major downside to this device that needs to be mentioned. The printer has an auto-leveling feature that was the main selling point for me. My older printers required frequent re-leveling and it was usually the first step in solving any problems. I ended up getting quite good at it. This one has no capacity for manual leveling, which is nice when it works. However, there are times when the auto-leveling function just doesn't work as well as a manual adjustment and there is nothing you can do but re-orient your print to a more stable position and add additional supports. If you are having trouble, make sure the build plate was level when you tightened the nut. It has a tendency to let itself be fastened with a tilt if you aren't watching out for it. Besides that, make sure your LCD screen protector didn't go bad like mine. Aside from those two model-specific issues, follow any standard resin printer troubleshooting guides you come across and you should be good. That being said, when this thing works, it works amazingly. The prints come out fast (about 75% faster than my older printers) and the details look sharp. So far, 100% of my prints have been for tabletop RPG use and wargaming. I print a lot of 25-35mm little heroes and they look great.
...
show more
Reviewed in the United States on February 12, 2024 by Jason Duncan