Search  for anything...
Ade Advanced Optics

ADE RD3-006x Green Dot + D1 Rear Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models,Canik TP9SF,Taurus GX4,TX22 GEN2,G3C,G3 with Factory Steel Sights Pistol

  • Based on 820 reviews
Condition: New
Checking for the best price...
$77.77 Why this price?
Save $122.22 was $199.99

Buy Now, Pay Later

As low as $12.96 / mo
  • – 6-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Monday, Aug 17
Order within 3 hours and 56 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Features

  • GLOCK & PICATINNY MOUNTING INCLUDED This listing comes with ADE red dot, a picatinny mounting plate (pre-assembled), and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to Glock 100. Does NOT fit Optic Ready MOS Glock and Glock with AFTERMARKET slide with optic cut.
  • FITS SELECT CANIK & TAURUS MODELS The included Glock plate also fit some other Pistols such as Canik TP9SF, DA, SA (does not fit SFX, COMBAT, SFT, Mete). This Glock plate also fits Taurus GX4, TX22 GEN2, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. Professional gunsmith installation is recommended.
  • MOTION-ACTIVATED GREEN DOT Upgraded with several enhancements to improve functionality and user experience. The rear locking screws have been removed and replaced with a self-locking mechanism for easier use and greater reliability. The new motion-activated technology puts the green dot illumination into sleep mode after five minutes of inactivity, instantly reactivating it at the previous brightness setting when motion or vibration is detected, ensuring seamless operation and improv.
  • CLEAR & DURABLE OPTICS Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA DOT & 5 BRIGHTNESS LEVELS 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery (Included). Battery supports motion-activated sleep mode and quick reactivation at previous setting.

Description

What is included in this package? Includes the ADE RD3-009 Crusader red dot (Doctor footprint), a Picatinny mounting plate, and a rear sight replacement plate for select compatible models. Which models does the included plate fit? The rear sight plate is designed for standard Glock dovetail cuts (Gen 1–5, non-optic-ready). Some Taurus and Canik models without optic cuts may share the same dovetail. What models does the plate NOT fit? Not compatible with optic-ready versions or slides with factory optic cuts. Also does not fit older Taurus models with polymer or non-standard rear sights. Will this plate fit optic-ready versions? No. This plate is made to replace the factory rear sight on non-optic-ready slides and will not fit models with pre-cut optic mounting systems. Why choose ADE Advanced Optics? Founded in Oregon in 2010, ADE provides practical, durable optics designed for everyday use, with a focus on reliable performance and functional design. ADE 006+D1 Plate ADE 006+G2 Plate ADE 009+G2 Plate ADE 009+D1 Plate ADE 012+G2 Plate ADE 012+D1 Plate ADE 015+D1 Plate Founded in 2010 in Oregon City, Oregon, ADE Advanced Optics delivers leading-quality products at manufacturer-direct price. Built by experienced optical engineers, our optics are developed through real customer feedback and real-world testing. Every product is designed for durability, precision, and practical performance—bringing advanced technology within reach of everyday shooters. ADE Advanced Optics—Practical Innovation. Proven Performance. Secure your optics with ADE's engineered mounting plates, built for accuracy and durability.

Brand: Ade Advanced Optics


Color: Green,Red


Style: Red Dot Sight


Sport: Hunting


Item Weight: 2.08 ounces


Material: Alloy Steel


Magnification Maximum: 6 x


Objective Lens Diameter: 22 millimeters


Magnification Minimum: 1 x


Compatible Devices: Handgun


Magnification Maximum: 6 x


Objective Lens Diameter: 22 millimeters


Magnification Minimum: 1 x


Compatible Devices: Handgun


Mounting Type: Dovetail Mount, Picatinny Mount, Weaver Mount


Field Of View: 19 yard


Reticle Type: Dot


Item Weight: 2.08 ounces


Color: Green,Red


Product Style: Red Dot Sight


Brand Name: Ade Advanced Optics


Sport Type: Hunting


Model Name: RD3-006B


Manufacturer: Ade Advanced Optics


Number of Items: 1


Unit Count: 1 Count


Manufacturer Part Number: RD3-006X+D1


Material Type: Alloy Steel


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Aug 17

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • Zip Pay in 4
  • Financing through Apple Pay
  • Financing through Google Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Would recommend
If you’re looking for a compact, no nonsense red (well, green) dot optic with a built-in rear sight, the ADE RD3-006x Green Dot might surprise you in a good way. It’s not a high end, break-the-bank sight, but for the price, it delivers impressive performance that’s reliable, durable, and easy to use, especially for pistol shooters who want something lightweight but functional. After putting it through its paces at the range and carrying it for a few weeks on my compact carry gun, here’s my honest take. First Impressions Right out of the box, the RD3-006x looks sharp. It’s a sleek, low-profile sight with a clean matte finish, and it doesn’t feel cheap. It’s actually pretty solid for its price point aluminum housing, good fit and finish, and the buttons are tactile without being overly stiff. The built in rear sight notch is a thoughtful touch. If you’re like me and appreciate backup irons for co witnessing or just peace of mind in case of battery failure, this is a big win. You won’t need to spend extra on suppressor height sights the notch works surprisingly well when paired with a standard front sight. Installation & Mounting The RD3 006x uses a Doctor/Noblex footprint, which means it fits a decent variety of optics ready pistols or mounts without needing an adapter plate (depending on your slide cut). I mounted it on a Glock 19 MOS using an appropriate plate, and it locked down securely with minimal fuss. Installation took maybe 10 minutes tops two screws, check the fit, zero it in. Everything needed (including tools) came in the box. ADE seems to get that not everyone wants to fiddle with custom tools or proprietary nonsense. The Dot & Glass Quality The green dot is crisp and easy to pick up, especially in daylight. Compared to red dots, I actually prefer green in brighter environments it’s more visible to the eye and reduces strain a bit when transitioning targets. You can choose from several brightness levels using the side buttons, and the controls are intuitive. The lowest setting works well in low light, while the highest handles sunny outdoor conditions just fine. The glass clarity is better than I expected. Slight bluish tint, sure but nothing that distracts or gets in the way of target acquisition. No warping or noticeable fish eye effect, which you sometimes see in budget optics. Durability & Zero Retention So far, the RD3 006x has held zero like a champ. After a few hundred rounds on both 9mm and .40 cal platforms, the dot is still dead on. I even ran a few drop tests on soft ground and bumped it a bit in a holster no shift, no issues. It’s not mil spec bombproof, but for range, EDC, or home defense, I trust it enough to keep it mounted. It’s also shock and recoil resistant, so unless you’re planning on throwing it in combat conditions, it should hold up just fine. Battery Life & Auto Shutoff It uses a CR2032 battery, which is easy to find and replace. Battery life is rated for thousands of hours on mid settings, and it features auto shutoff after a period of inactivity, which is a huge plus. You can also manually power it down if you prefer. One downside? The battery is bottom mounted, meaning you’ll need to remove the optic to change it. Not a dealbreaker, but something to note if battery swaps are a pain point for you. Price & Value This is where the RD3-006x really shines. You’re getting a solid green dot optic with rear sight integration for well under $150, and it punches above its weight in terms of performance. Sure, it’s not a Trijicon RMR or a Holosun 507C, but it also doesn’t come with that kind of price tag. If you’re looking for a budget friendly optic that you can actually train with, carry with, and trust to perform, this is a strong contender. Final Thoughts The ADE RD3 006x Green Dot Rear Sight is a great choice for shooters who want simplicity, affordability, and reliability all in one. The green dot is crisp, the built in rear sight is actually usable, and it holds zero well, even on higher recoil calibers. It’s not trying to be a $400 optic and it doesn’t have to be. It’s for the practical shooter who wants functionality without fluff, and it nails that balance. Whether you’re just getting into optics or want a dependable backup sight that won’t break the bank, this one’s definitely worth a look. ... show more
Reviewed in the United States on July 28, 2025 by Amazon Customer
    • 5/5 stars, one minor issue for me, easily fixed.
This is a great optic for the money, I would definitely buy this again for a different gun. This optic is better for me than my Vortex Venom on my CZ 97b. The ADE green dot is extremely visible, the on/off button is in the center of the optic, above the barrel, not on the side above the slide serrations like the Vortex Venom. This means it’s really unlikely you’ll turn it on or off unintentionally, no matter how you carry it. This came zeroed perfectly, I matched it with a 9mm bore laser and I didn’t have to touch the elevation or windage screws. I have one minor caveat with this ADE green dot, but it’s tiny and I still give this 5/5 stars. I bought this to stick on my Glock 43x (non-MOS) it comes with a metal baseplate which screws into a mounting insert which sits under that, replacing the rear sight. My only issue is the metal insert which goes into the sight slot was far too large to fit without sanding it. The rear sight can be removed with a sight pusher, but the mounting insert is too low profile to install with the pusher (because the base plate has to screw into it from above and sit flat). So I had to install the insert with hammer and punch, but it was too large for the slot. It went about 25% of the way in and got stuck completely, I had to hammer it back out the opposite way. The insert is kind of triangle shaped with a flat top, I had to sand it on the 2 top two diagonal faces until it was bare metal. I just laid a piece of medium grit sand paper down and rubbed it manually, took like two minutes. You do have to be careful that you don’t take too much off or the base plate with optic will slide out. I had sandpaper, it took a couple of minutes, it fits perfect now, no big deal. So what does the Vortex Venom have for $220 that this doesn’t at $68.99? Not a lot to me. The Vortex and the ADE optic both have adjustable dot brightness settings. The battery cover of the Vortex Venom is on top of the optic, which is the only superior design element it has over the ADE optic. On the ADE you have to use an allen key on two screw which connect to the base plate, and remove the whole optic in order to access the battery (you dont have to remove the base plate or the sight insert.) To me this isn’t a deal breaker, dot optics use so little power and it’s really easy to take the 2 screws out of the base plate. Only other difference between the Vortex Venom and the ADE I’m aware of is the on off button. On the Venom the button is on the side where it can too easily be hit by accident. It’s still easily accessible on the ADE (front face, above barrel) but way less easy to hit by accident. Overall, I give this optic a 5/5 for my needs. The ADE has everything I need, and is literally 1/3rd the price of a Venom. A minor amount of sanding isn’t a big deal for me personally so it’s a nonissue. ... show more
Reviewed in the United States on February 12, 2022 by Armageddon
    • Lens cracked after first try
Install was easy enough on my Glock 19. Made sure I have the locktite blue to keep it snug and tight. But first trip to the range, I noticed it cracked on the upper left corner after maybe 7 shots. Returned it for a refund. My friends told me ADE is a good first red dot...I don't think so and now I am kind of avoiding all red dots. ... show more
Reviewed in the United States on July 2, 2023 by Jack Ryan
    • Green means Go!
Yep. Totally worth it!!! G3C perfect.
Reviewed in the United States on July 30, 2026 by Ricky Llewellyn
    • It's complete!
I should give this 5 stars because the price, but the reality is that even if this was for a toy I'd expect to see it during daytime. It's REALLY difficult to see the dot outdoors on a sunny day. If you shoot indoor ranges it's fine, and during hunts from dusk or dawn is great, but mid day it's almost impossible to see the green dot even at it's max settings. I have used it once and luckily I "trained" to find the dot quickly but don't expect this to be a right away dot like those expensive ones. The shoe is really easy to install too, but you might need a sight tool to remove the old sight and install the shoe. ... show more
Reviewed in the United States on March 12, 2026 by Dan
    • Mounts crooked
The way it mounts its angled up in the front it wont adjust far enough down to sight it in
Reviewed in the United States on July 3, 2026 by Andrew rigsby
    • Nice optic for the $$
This fit on my Glock Gen 2. I have no issues with this optic. I'm shooting .22 with it utilizing a conversion kit so low recoil. It has an auto off feature which is nice. Battery (2032) should last a while. I didn't have to adjust up or l or r, which was nice. I would definitely recommend this optic for the $$. Came with everything needed to mount plus extras for a Picatinny rail, which I didn't have. ... show more
Reviewed in the United States on March 21, 2026 by user
    • Items is exactly as described.
Item is exactly as described. Great customer support.
Reviewed in the United States on July 1, 2026 by roastedpig_671

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...