3M Aqua-Pure Whole House Scale Inhibition Inline Water System AP430SS, Prevents Scale Build Up On Hot Water Heaters and Boilers

Features

• Helps Inhibit Scale: Polyphosphates, included in This Product bind calcium and magnesium hardness minerals, preventing them from becoming a solid to help reduce the build-up of mineral scale in pipes and water using appliances
• Helps Protect Hot Water Heaters: Extend the life of water-using appliances such as water heaters, clothes washers and dishwashing machines, as well as plumbing fixtures like faucets, pipes and shower heads by reducing scale build-up and corrosion
• Not a Filter, A Scale Reduction System: System diverts only a small portion of water passing through the system head into the cartridge to inject polyphosphates in minute concentrations and return it to the water supply to help reduce scale build-up
• Minute concentrations of polyphosphates help reduce scale build-up by inhibiting the build-up of hardness minerals onto metallic surfaces. Polyphosphates also help reduce corrosion by forming a thin protective layer on the inner-surface of pipes.
• Maintains Efficiency: By Inhibiting Scale Build Up On Heating Elements, Helps Maintain Water Heater Efficiency
• Easy To Replace: Easy Change Out Of The 3M Aqua-Pure Ap431 Replacement Water Cartridge Makes System Maintenance Easier
• High Flow Rates: The AP430SS provides unrestricted flow of up to 10 gpm (37.9 lpm) when installed with 3/4 NPT inlet/outlet connections
• System is to be installed on cold water line feeding water to the water heater. Included System Head fittings are two 3/4" NPT (female) connections. Additional parts and tools are required for installation and not included.
• For parts and tools required, read all instructions carefully and measure your cold water line feed pipe before attempting to start installation
• Binds calcium and magnesium hardness minerals, preventing them from precipitating out of solution and building up on metallic surfaces
• Contains Siliphos, a 100% pure food grade scale inhibitor approved by USDA
• Stainless Steel Head
• Flow rate 6 gallons per minute
• Max operating Temp 100F

Description

The 3M Aqua-Pure whole house scale inhibition inline water system AP430SS is designed to help reduce scale build-up and corrosion - thereby helping to extend the life on hot water-using appliances such as water heaters (standard gas, standard electric and tankless), boilers, clothes washers and dishwashing machines, and on plumbing fixtures like faucets, pipes, and shower heads. The AP430SS provides a flow of up to 10 gallons per minute (37.9 liters per minute) when installed with 3/4” NPT inlet/outlet connections. Scale is calcium and magnesium mineral deposits that often form when hard water is heated. Water hardness is responsible for most scale formation in pipes, water heaters, finishes and flat surfaces, and other water using appliances. Over the time scale build-up can significantly shorten the life of any water-using appliance. Also scale buildup inside pipes causes loss of water pressure as the interior gets smaller and smaller over time. The AP430SS contains polyphosphates to bind calcium and magnesium hardness minerals, helping to prevent them from precipitating out (or becoming a solid) and building up on metallic surfaces. Polyphosphates also helps reduce corrosion by forming a thin protective layer on the metal surface. The 3M Scale Inhibition Water System AP430SS is tested by NSF International to NSF/ANSI Std. 42 for material and structural requirements only. The overall single vessel/cartridge design of the AP430SS makes the 3M Aqua-Pure AP431 Water Filter Cartridge change-out easy for professionals as well as end users. Change disposable filter cartridge every 6 months or sooner if you observe noticeable reduction in water flow rate. The AP430SS is to be installed on the cold water supply line of the water heater or at point-of-entry of water into the home. Tools and parts required (not included): one 3/4” stop and waste valve (compression type), PTFE tape, two 3/4” male x 3/4” street adapters, one 3/4” compression gate valve, and pipe cutter. Read all instructions carefully before attempting to start installation. The existing shut-off valve remains in place and still acts as the cold water shut-off. This filter system has two 3/4” NPT female connections, but you may need additional adapter fittings (not included) to match up to your piping. Measure your cold water supply line pipe to ensure proper connection sizing and fittings. The AP430SS can be adapted to various pipe sizes by using a reducing adapter (not included) on either end of the 3/4” NPT head. Adapter fittings (not included) can be sweated, threaded, or quick-connected to adapt to various pipe types like copper, galvanized pipe or PEX tubing using appropriate adapter fittings. Use galvanized fittings for installation of galvanized pipe.

Material: Stainless Steel

Product Dimensions: 2.8"D x 2.8"W x 10.2"H

Item Weight: 0.86 Kilograms

External Testing Certification: NSF, ANSI

Product Benefits: help reduce contaminants such as sediment, chlorine taste and odor

Is Discontinued By Manufacturer ‏ : ‎ No

Product Dimensions ‏ : ‎ 2.8 x 2.8 x 10.2 inches; 1.9 Pounds

Item model number ‏ : ‎ 70020003060

Department ‏ : ‎ Unisex-Adult

National Stock Number ‏ : ‎ 5130-01-073-0811

Date First Available ‏ : ‎ May 2, 2005

Manufacturer ‏ : ‎ 3M

Best Sellers Rank: #37,361 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #80 in Under-Sink & Countertop Filtration

#80 in Under-Sink & Countertop Filtration: