Search  for anything...
TP-Link

TP-Link TL-SG2210P V3| Jetstream 8 Port Gigabit Smart Managed PoE Switch | 8 PoE+ Ports @61W, 2 SFP Slots | Support Omada SDN | PoE Recovery | IPv6 | Static Routing | 5 Year Manufacturer Warranty

    • Based on 1,881 reviews
Condition: New
Checking for product changes
$114.99 Why this price?
Save $35.00 was $149.99

Buy Now, Pay Later

As low as $19.17 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Saturday, May 3
Order within 4 hours and 54 minutes
Available payment plans shown during checkout

Recently Viewed

Style: 8 Port PoE+, 2 SFP Slots, 61W


Features

  • Flexible Full Gigabit 10-Port PoE Configuration8 PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of 61W, together w/ 2 Gigabit SFP slots for high-speed connections.
  • Integrated into Omada SDNOmada SDN platform integrates network devices, including switches, access points & gateways with multiple control options offered Omada Hardware controller or Omada Software Controller. Standalone Mode also applies.
  • Cloud AccessRemote cloud access and Omada app brings centralized cloud management of the whole network at different sitesall controlled from a single interface anywhere, anytime.
  • SDN CompatibilityFor SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN switches, access points & gateways. Non-SDN controllers work only with non-SDN access points. For devices that are compatible with SDN firmware, please visit TP-Link website.
  • Enhance Network SecurityAdvanced security features include 802.1Q VLAN, IP-MAC-Port binding, ACL, Port Security, DoS defend, Storm control, DHCP Snooping, 802.1X radius authentication and more.
  • Advanced Software FeaturesPrioritize your traffic and guarantee high quality of video or voice data transmission withL2/L3/L4 QoS, IGMP Snooping, Link Aggregation and Flow Control.
  • 5 Years WarrantyBacked by our industry-leading 5-years warranty and free technical support from 6am to 6pm PST Monday to Fridays, you can work with confidence.

Description

TL-SG2210P is equipped with 8-gigabit RJ45 ports and 2 SFP slots, all RJ45 Ports support IEEE 802.3af/at with total PoE power budget of 58W and useful PoE power management features. TL-SG2210P is specially designed for the small and medium business networks that require efficient network management. TL- SG2210P comes with a comprehensive set of features, such as Link Aggregation Group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service(QoS L2 to L4), Storm Control and IGMP Snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability.

Brand: TP-Link


Number of Ports: 10


Included Components: TL-SG2210P, Power Adapter, Installation Guide, Rubber Feet


Color: Black


Compatible Devices: Desktop


Switch Type: Ethernet Switch


Product Dimensions: 8.23"L x 4.96"W x 1.02"H


Platform: Not Machine Specific


Voltage: 12 Volts (DC)


Case Material: Metal


Upper Temperature Rating: 40 Degrees Celsius


Interface Type: PoE, RJ45


Data Transfer Rate: 2 Gigabits Per Second


Current Rating: 1.31 Amps


Manufacturer: TP-Link


UPC: 845973088668


Item Weight: 2.77 pounds


Item model number: TL-SG2210P


Date First Available: August 17, 2015


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Saturday, May 3

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Works great behind my pFsense router
Style: 24 PoE+ Port, 4 SFP Slots, 250W
Review Image by meine39 meine39
I added another PoE powered AP (a TP-Link EAP615 wall mounted AP) in addition to an existing ceiling mounted TP-Link EAP610, and decided it was time to ditch the PoE injector on the EAP610 and power them both through this PoE switch - a much cleaner implementation in my home network rack than a PoE injector with its "wall wart" power brick and related device. Alternatively I could have gotten a smaller capacity multi-port desktop PoE switch, but that doesn't lend itself well to the limited capacity of my little 6U network rack and its tidy cable management. While this switch is a bit pricy, I like that it integrated with my software based Omada controller (running on a Windows always-on home server). This switch allowed me to easily identify everything connected to my wired and wireless networks (home network and VLAN based IoT network) using the Omada controller software GUI. I was a bit intimidated at first by the Omada controller and whether it would let me use it with my pFsense firewall, but it ended up being pretty quick and intuitive to set up, and everything coexists nicely. I've seen some complaints about fan noise - I have this rack mounted in my unfinished basement - the fans make some noise but nothing terrible, and certainly nothing that can be heard in the rest of the house. I'm not sure if fan noise is a fair criticism here - this is a fairly sophisticated device and not something that should be mounted in a living area IMO. This is really more small to medium sized business oriented, where it is likely to reside in a network closet where noise is a given. Given the excess PoE capacity this switch gives me, I will likely add the Omada OC200 hardware controller, as having the software running on a Windows machine means I'm subject to Windows' inevitable software updates and reboots. I tend to favor hardware implementations rather than software implementations anyway - running stuff on host machines and/or VMs is not ideal IMO. I'm pleased with this device - a nice "level-up" to my increasingly sophisticated home network, and the Omada SDN is an inexpensive alternative to other SDNs. ... show more
Reviewed in the United States on December 19, 2023 by meine39 meine39
    • Solid buy. Recommended, but see details
Style: 16 Port w/ 8 PoE+ Port, 150W
Review Image by Dad, the engineer Dad, the engineer
Use Case I crawled around and put about 6000ft of Cat5E witing into my old house, but there was one attic that I only ran two lines to. As a temporary measure I put an 8 port switch up there and used a bunch of individual PoE injectors. The purchase of the TL-SG1016PE is meant to replace all of that, and act as a more permanent solution. Build Quality The TL-SG1016PE is standard fare when it comes to SOHO networking products. It's in a metal housing that seems durable enough. The unit it 1U in height, and includes flanges to mount into a 19" rack. The case has hexagonal perforations for ventilation, along with 40mm fans. Thankfully, the power supply is internal, and the power hookup is a standard C13 jack. A straight C13 cable is included. Setup/Performance I bought a cheap 4U 19" bracket to mount to a stud in the attic, but it's one of the shallow wiring type brackets for punchdowns. The TL-SG1016PE's mounting brackets support the switch being mounted vertically (where the flanges are rotated 90 degrees). I mounted the switch in the lowest U position, and a punchdown block will go in the top position. The fit is good, and there were no surprises. I think this is a really good mounting option for newer homes that have structured wiring coming back to a closet (usually a master bedroom closet), as it can significantly reduce the practical space/footprint consumed. The PoE ports of the device work fine, but it's worth noting that the total power budget of the device is 110W. While I will not end up using anywhere near this, it's still good for you to know that the limitation exists. This switch supports 802.3at-2009, which can max out the power budget at 4 devices (even though there are 8 ports). For reference, the 5 cameras that I have on the switch consume about 24W total (and that's at night when the IR consumes more power). When I have the full complement of 8 cameras on the device, I still won't be anywhere near the power budget. There isn't much to the setup of the hardware portion of the switch, but that still leaves the configuration of the "smart" management of the switch. While the TL-SG1016PE is not a full L2/L3 managed switch, it does have some limited extra functions. In order to access the switch, you can use a TP-Link software application to set the IP address of the switch - it's included on CD, but you can use the one you have installed already if you have any other TP-Link switched already. I prefer to assign static addresses, but DHCP is available, too. Once you've assigned the IP, you can access the web management interface. While I was able to log in with Microsoft Edge, I wasn't able to change the device password unless I used Chrome; Edge seemed to work for all other functions. The first thing I did was change the device password. I then created a link aggregation group (LAG) for the two lines that I'd run to the attic, which creates a higher bandwidth connection back to a switch (or computer) on the other end, provided that the other end supports it as well. The last thing I did was to create a VLAN for the cameras, which I think is a smart idea for anyone that has externally mounted cameras. Some of my cameras are mounted high up on the house, but others are low enough that someone could access the ethernet cabling with a stepladder... if they do, the VLAN limits the LAN access that the person would have. The web management includes PoE configuration and usage details. You can set a switch-wide power limit, as well as per-port power policy. I just left everything at auto. The usage details are comprehensive, displaying exactly what the negotiated power level was, along with the instantaneous usage. Something worth noting is that the TL-SG1016PE, like the switch I was using before it, will be operating in environmental conditions that are out of spec for the unit. The switch has an operating temperature limit of 40C, and the attic routinely gets hotter than that. The robust cooling of the unit, along with the relatively low power draw I will have (compared to the 110W max), should give me at least a few good years of operation. I'd consider that to be a great result. Conclusion There are a few things I would change about the TL-SG1016PE: 1. It would be nice if the unit shipped with the current firmware (it doesn't). There are a couple notable differences between the 5/18 firmware and the 5/17 firmware that ships on the device. I recommend loading the new one ASAP 2. I would prefer foam filters on the vents. This is not something that most people wouldn't want or need, but I've got my unit in an attic... 3. It would be nice if the unit (which uses temp-controlled fans, I think) would have hall-effect RPM monitoring of the 40mm fans, and could notify the admin of fan failure 4. It would be nice if there was some syslog or SNMP support Ok, so that's out of the way... none of the items above are absolutely necessary. As it is, the TL-SG1016PE is performing flawlessly. The VLAN and LAG are functioning correctly, and the PoE hasn't had any faults with my cameras. I highly recommend this item. ... show more
Reviewed in the United States on October 28, 2018 by Dad, the engineer Dad, the engineer
    • Great for standalone use, even better with other Omada-compatible products
Style: 8 Port w/ 4 PoE+ Port, 62W
I recently bought a second one for my bedroom, as I had a great experience with the first one I set up for my living room. As someone who works in IT, this is a great switch for someone who would want to experiment with home networking, but more on that later. For around $100, this is not a switch you use if you need only extra Ethernet ports and you aren't configuring anything. The noise and heat output are not really noticeable, but I also want to note I keep my living room switch in a TV stand with the sliding doors closed. It is also a serviceable size, on par with other managed network switches, if not smaller than some. So in terms of build quality and value, it is a steal. Standalone mode provides tons of functionally and custom port configurations, but where the networking side really shines is with the Omada Cloud Controller. Especially as someone who used this switch in tandem with other TP-Link network products, the Omada controller (which I run it off my PC as it is free; there is a hardware controller but it really is not needed) provides a full end-to-end network management experience. I have a wired VPN router from them and an Access Point (they have routers that provide WiFi as well but I needed them separate because of how my home is laid out) alongside the switch. I would not pass up the opportunity to experiment inside the controller, as it adds a surprising amount of features that can keep up with some of the networking interfaces I utilize in my profession on a daily basis. ... show more
Reviewed in the United States on November 10, 2023 by Roberto C.

Can't find a product?

Find it on Amazon first, then paste the link below.