Tier1 1 Micron 20 x 2.5 Whole House Water Filter | Spun Wound Polypropylene Sediment Depth Filtration | Replacement for Pentek P1-20, SP-P1-20, PX01-20 | 2.5 x 20 Water Filter Cartridge (6 Pack)

Features

• COMPATIBLE REPLACEMENT MODELS Designed to fit standard 20 x 2.5 whole house filter cartridges and a replacement for Pentair P1-20, SP-P1-20, PX01-20, PS1-20C, 155755-43, 255691-43, SDC-25-2001, 93125, and 155304-43, along with many equivalent 2.5 x 20 water filter housings.
• 1 MICRON DEPTH SEDIMENT FILTRATION Spun wound polypropylene depth media captures fine sediment throughout the cartridge, helping reduce rust, sand, silt, dirt, and scale commonly present in well water and municipal water systems.
• FINE SEDIMENT POLISHING DESIGN The graded density structure traps larger particles on the outer layers while finer particles are captured deeper inside, making 1 micron filtration ideal for sediment polishing ahead of downstream filters.
• SERVICE LIFE VARIES BY WATER CONDITIONS Replacement frequency depends on sediment levels, water quality, and micron rating; finer filters capture smaller particles more quickly, so monitoring flow or pressure changes helps determine when cartridge replacement is needed.
• FINE SEDIMENT PROTECTION FOR WHOLE HOUSE SYSTEMS Commonly used as a polishing-stage or secondary sediment filter, or as a first-stage filter only in low-sediment water conditions, to help protect plumbing, appliances, water softeners, and carbon filters from fine particulate buildup.

Features

• COMPARABLE FIT: Fits standard filter housings using 20 x 2.5-inch filters. Actual Size: 20 inches (length) x 2-1/2 inches (outside diameter)
• HIGH QUALITY MATERIALS: Spun Wound Polypropylene 20 Inch sediment filter
• COMPARABLE REPLACEMENT: Cost effective alternative to P1-20
• HIGH QUALITY WATER: Our Tier1 20 Inch sediment water filter is designed to help ensure you serve only high quality water throughout your home
• ENHANCED WATER QUALITY: Improves the quality of your water through contaminant reduction

Description

Whole house water filter systems are placed on the main water line entering your home, and designed to remove rust, sediment, chlorine and other chemical contaminants from all water entering your home. So no matter where you are in your house, whether it’s the guest bedroom shower, outside hose, kitchen or bathroom sink, you and your family can have clean, healthy and great tasting water. Not only does a whole house water filter give you the luxury of clean great tasting water from every faucet in the house it can also help extend the life of appliances that use water, such as dishwashers, water heaters and washing machines, because it removes the sediment, chlorine and other contaminants that would otherwise be entering those appliances. Specifications Features Actual Size: 20 inches (length) x 2-1/2 inches (outside diameter) Media: Spun Wound Polypropylene Filter Life: 6 months Micron: 1 Flow Rate: 10 Designed to Fit Fits standard filter housings using 20 x 2.5-inch filters Contaminants Removed ParticulatesSediment Comparable Part Numbers -5155755-43PS1-20C255691PX01-20 Read more Easy Installation 1. Turn off water supply. Press red pressure-relief button (if present) 2. Unscrew housing. Remove large o-ring, wipe clean and set aside 3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly 4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly 5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove 6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove 7. Insert new filter cartridge 8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge 9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation Read more Reasons to Invest in a Sediment Reducing Filter Sediment in drinking water on its own isnt particularly hearmful to humans or pets but it can be an indication of lead or iron contamination which can cause serious health issues. If you suspect there is lead in your pipes get your water tested. Sediment filters help protect other appliances and posessions from the harmful effets of particles which can cause staining and spots on clothes, sinks, toilets and more and wear and deterioration on pipes and appliances If other filtration mediums are already in place in your home, sediment filters as a first layer of defense can increase the lifetime of your other filters by reducing the number of particles and contaminants that would otherwise wear on those other filters. Read more

Product Dimensions: 20 x 4.68 x 7.02 inches

Item Weight: 2.96 pounds

Is Discontinued By Manufacturer: No

Date First Available: March 8, 2016

Material: Polypropylene (PP)

Product Dimensions: 2.34"D x 2.34"W x 20"H

Item Weight: 2.96 Pounds

External Testing Certification: NSF

Product Benefits: Reduces sediment and improves water quality

Model Number: P1-20

Product Benefits: Reduces sediment and improves water quality

Brand Name: Tier1

Set Name: P1-20

UPC: 635510434610

Unit Count: 6 Count

Number of Items: 1

Manufacturer Part Number: P1_20

Manufacturer: Tier1

Material Type: Polypropylene (PP)

Item Dimensions D x W x H: 2.34"D x 2.34"W x 20"H

Item Weight: 2.96 Pounds

External Testing Certification: NSF