Protopasta 3D Printer Filament | PLA Filament 1.75mm | Matte Fiber HT PLA Walnut Wood | 500g Spool
Buy Now, Pay Later
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
FREE refund/replacement until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Recently Viewed
Features
- Walnut Wood HTPLA - A dark brown with elegant sheen and sophisticated texture. Walnut is darker than Chestnut and less red than Mahogany. Great for rigid, artistic prints with no special hardware required
- Finishing Variety - With the option to heat-treat, wire brush, or polish this filament 1.75 gives you plenty of different choices to give your finished product a different look.
- Matte Fiber Materials - Fine gold pearl and black flecks, bringing warmth, radiance, and texture with just the right tones and sheen youd expect for a premium wood-like finish.
- High Quality - Proto-pasta offers only U.S-made, high-quality 3D printer filament PLA. Using only premium materials with a focus on craftsmanship this PLA 1.75 is one you can trust to get the job done.
- Easier to Use - This PLA Filament 1.75 mm has been flow-optimized and has less moisture than standard PLAs to help avoid heat soak and to keep mass flow up. This combination of features makes it easier to use than most standard PLAs.
Description
Matte Fiber HT PLA Walnut Wood - 500g Spool. Material DataBase resin: HTPLA - Heat Treatable PLAParticle size: less than 250 microns (0.25mm)Odor: low or noDensity: Approx. 2.30 g/ccLength (500g): 97m (1.75mm) and 36m (2.85mm)Heat treating: 110C (225F) for 10 min or as required for the desired resultTotal loss of stiffness (before heat treat): 50-60C (Tg)Total loss of stiffness (after heat treat): 150-175C (melting)Dimension change (before heat treat): 0% X/Y/ZDimension change (after heat treat): 1.5% shrink X/Y and 1% growth Z typical but please calculate and confirm for your specific print and processPrinter SettingsSpeed: 10-20 mm/s 1st layer, 20-80 mm/s rest of partNozzle Set-point: 185-215C (hottest on 1st layer for best adhesion)Nozzle Actual: maintain set-point, reduce speed if less thanNozzle Type: Standard or wear-resistant for extended useNozzle Diameter: 0.6mm or larger preferred, 0.4mm okay with 0.25mm minimum for expertsLayer thickness: 0.15-0.20mm recommended for a balance of quality, reliability, and productivityBed Temperature: Room-60C (over 60C can worsen warp)Bed Preparation: Elmers purple disappearing glue stick or your other favorite PLA surface preparation
Brand: Proto-Pasta
Material: Polylactic Acid
Color: Matte Fiber Htpla Walnut, 500g
Item Weight: 0.5 Kilograms
Item Diameter: 1.75 Millimeters
Manufacturer: Protoplant
Brand: Proto-Pasta
Item Weight: 1.1 pounds
Product Dimensions: 8 x 8 x 2.2 inches
Color: Matte Fiber Htpla Walnut, 500g
Material Type: Polylactic Acid
Number of Items: 1
Manufacturer Part Number: HTMF1705-WAL
Date First Available: February 19, 2022
Frequently asked questions
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
