OVV3D Wood PLA Filament 1.75mm, Black Walnut Wood 3D Printer Filament, Add More Than 30% Real WoodFiber, Matte and Frosted 1.75 WoodPrinting 1kg
Condition: New
Buy Now, Pay Later
As low as
$5
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Extended holiday returns
Returnable until Jan 31, 2026 Learn more
Returnable until Jan 31, 2026 Learn more
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Monday, Dec 8
Recently Viewed
Color: Walnut Wood
Features
- WALNUT WOOD PLA+OVV3D walnut wood PLA filament add more than 30% real wood fiber, which makes the printed models look like real woodwork. This wood PLA shows a dark brown or chocolate brown color, has the grainy appearance of woodwork and even smells like wood.
- EASY TO PRINTThe diameter tolerance of this 1.75 PLA filament is +/- 0.03mm. More stable diameter tolerance of 3D printer filament would give you smoother 3D printing experience. High toughness PLA filament 1.75mm cause you have room for 3D printing imagination.
- PLA PLUS RAW MATERIALThe raw material comes from Europe, and it has been developed and modulated to show a outstanding print quality on the PLA. No jamming, no bubble, no tangle, and no layer line, just perfect wood PLA filament.
- PERFECT WINDING Using the latest intelligent winding machine and strict manual inspection procedures to ensure that each roll of PLA filament is neat and tidy. We pay attention to every detail of our 3D printer filament to provide high quality 3D printing.
- ECO PackagingInstead of plastic spools, we use paper spool and paper box to package PLA filament. Protecting the environment is the responsibility of each of us. The PLA filament is vacuum packed with high quality desiccant to keep dry.
Brand: OVVNYXE
Material: Plastic, Polylactic Acid
Color: Walnut Wood
Item Weight: 2.2 Pounds
Item Diameter: 1.75 Millimeters
Manufacturer: OVV3D
Brand: OVVNYXE
Item Weight: 2.2 pounds
Package Dimensions: 8.86 x 8.23 x 3.03 inches
Item model number: E01Walnut
Color: Walnut Wood
Material Type: Plastic, Polylactic Acid
Number of Items: 1
Manufacturer Part Number: E01Walnut
Date First Available: May 10, 2023
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Dec 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Tri-color Macaron
Works well and looks great
Reviewed in the United States on November 5, 2025 by Randolph
Color: Tri-color Red Blue Yellow
Love this stuff, prints well and looks amazing.
Reviewed in the United States on October 30, 2025 by David Fox
Color: Walnut Wood
I was honestly scared to try this filament, given all the folks who had problems with clogs and all. And while I have extra nozzles and could have easily changed mine out to a .6mm before printing, I was too lazy. But I did follow all of the various pieces of advice, including slowing down the print speed (I just moved it to 80% of the default for 'precision' printing on my Ankermake), recommended temperatures for bed and printing, fan kept on, and I used a raft for better adhesion and a glue stick on the bed. The first print was a delicate statue that I didn't take a picture of because my kid was go giddy at how great it was she wrapped it up for her teacher before I could snap a pic. Print #2 I managed to stall her long enough to get a photo. Both items printed on first try, no clogs, no issues at all. I'm being careful to store it now in a bin where I have a little dehumidifier, and I look forward to doing more with wood pla! Oh - and while these prints do not have a wood grain look, they definitely feel more like wood than any of my other PLA. They are very cool little prints. I would buy again.
...
show more
Reviewed in the United States on December 15, 2024 by Amazon Customer Amazon Customer
Color: Tri-color Sky Blue & Rose Red & ...
Great color
Reviewed in the United States on October 29, 2025 by cheryl barry
Color: 4 Pack Tri-color & Dual-color
I bought this 4 pack to give dual color and tricolor silks a whirl, to print some cheistmas gifts. I have now been futtzing with this for 2 days and havent managed to get a single print off. Moreover, I have tried different first layer/project temps, bed temps, and reslicing different projects using different infill patterns, shell thicknesses, brims and the like and have yet to get a single print past the first layer. The cardboard spools on my rolls are offcenter and wobble when they roll on the spool (probably has zero affect on print quality). When I run a first layer calibration, the filament lays down fone and looks like it should produce a good print. But no matter what object I slice and print even with those same settings, this filament globs up all over my hot end and creates a nightmare of a mess. I made a mistake in setting a print up and walking away for 30 minutes after it started, with the first print, and had this pla smashed all over and melted around my nozel and hot end. (Probably going to have to replace the hot end at this point, though it still seems to function, but is covered in this melted PLA film). I have never had this kind of issue with any other filaments I have ordered, and wouldnt be able to recommend this. Furthermore, its pretty expensive for 4 200g rolls of questionable quality. Your mileage may vary, as I see plenty of good reviews here which is why I purchased. But I suspect some bad QC is to blame. Printing on a prusa MK3
...
show more
Reviewed in the United States on December 21, 2024 by Chris Stanford
Color: Tri-color Sky Blue & Rose Red & ...
The filament is a matte filament and looks very dry, also if you print a top n bottom of a dinosaur egg you’ll have to print the bottom first, then the top, not both at the same time or the fade of colors will not match, even by doing bottom n too it doesn’t match because some of the color is hidden in the screw section, the photo shows how it will turn out, this filament is not for short run items, because you’ll have a green, or a pink, or blue item but not a multi color item, it takes a long time for the color to change from one to the other when printing, the colors are pretty and would be Easter type colors but wouldn’t do well on small prints your hoping to be multi color, the picture of eggs apart does the one on the right printed both have at the same time and has purple on bottom n green on top but when assembled it doesn’t look correct, other egg was printed bottom first n top last, laying on table the color change looks correct, but when assembled part of the color on the screw gets hidden and it doesn’t match correctly, it’s kinda close but not great I hope this helped, use 2 or 3 color for easy results of eggs
...
show more
Reviewed in the United States on January 7, 2024 by Wolfboy Wolfboy
Color: 4 Pack Tri-color & Dual-color
Tip: Always dry your filament before using! My full review is listed under the pros and cons. Pros: - Great adhesion - Interesting color effects - Very shiny - Easy to print - Spools nicely wound Cons: - Colors not as advertised - Occasional gaps in prints - Occasional color shifts - Pricey compared to other filaments --Print quality-- I printed these sample spools on my Prusa Mini+ with a PEI bed and the adhesion was great. I printed at 220C with the default settings in PrusaSlicer and the prints came out very shiny with little to no stringing (after drying). The spools are wound very nicely (better than Atomic Filaments, but not quite as perfectly as Prusament), but they don't fit on the spool holder that came with my printer. I ended up laying the spool flat and the printer had no problem pulling filament without tangling. I did hear quite a few popping noises while printing, and upon inspection I found some gaps in my prints. I do expect pops with wet filament, but I dried it down to 14% humidity so I don't see why it would still be wet. The gaps weren't very noticeable in my prints, but this could be a concern for you if you're looking for perfection. One of my prints had a few layers where the colors moved--ie, if red was on top, it switched to yellow for a few layers, then went back to red. This disrupted the rainbow effect on the print, but thankfully it only lasted for a few layers. I didn't expect this due to how nicely the spool was wound, so I'm not sure what happened there. Again, this might be an issue for you if you're looking for perfection, but it didn't bother me too much. --Colors-- My biggest gripe is with the colors. They're darker than what's advertised. I have no doubt that the colors are stunning in bright, natural light, but they simply aren't the same as what you see in the pictures, regardless of how your monitor is calibrated. The colors look much darker when viewed in indoor light (even when it's bright/by a window), and some of the colors look muddy, especially the tricolors. The dual colors look pretty good, but they're still dark. If you're expecting to receive the exact colors listed in the photo, look elsewhere. But if you don't mind darker shades, this might be perfect for you. --Value-- I bought this at $35 for 4x200g of filament. That's $0.044 per gram. Prusament is $30 for 1kg, or $0.03 per gram. Atomic Filament is $30-$35 for 1kg, or $0.03-0.035 per gram. As you can see, this filament is more expensive than both of those high-quality filaments. I'd say that the OVV3D filament is good, but Atomic and Prusament are great, so in the future I'd rather buy from them than get another sample pack from this brand. The benefit of buying this particular pack is that you get four colors instead of one, which is why I bought it in the first place. I wanted to try a few different colors before committing to a full spool. I'm glad I did so, because the colors aren't what I need for bigger projects, and I don't plan on buying them again. All in all, a good printing experience, but not my favorite final result.
...
show more
Reviewed in the United States on March 9, 2024 by Cameron Cameron