Outsunny Outdoor Glider Chair, Gliders for Outside Patio with Smooth Rocking Mechanism and Lightweight Construction for Backyard, Black
Condition: New
Buy Now, Pay Later
As low as
$15.83
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Aug 31
Recently Viewed
Color: Black
Features
- Cozy Glider Chair: Our single-person outdoor glider features a 28-inch-high backrest and ergonomically protruding neck support, providing your upper body extra comfort.
- Smooth Rocker: The smooth rocking mechanism on our patio glider swings you quietly through the breeze. With metal treated to be heat and wear-resistant, our rocker offers outdoor comfort season after season.
- Mesh Fabric: Our outdoor glider chair is built with breathable sling fabric that keeps you cool in the summer heat by letting in the wind. It's water resistant and quick to dry, too, meaning you won't have a long wait after rain.
- Lightweight: If you prefer to read a book in the shade or take a nap in the sun, our glider chairs can adapt. A versatile outdoor seating option, our glider chairs are easy to carry with a thoughtful, lightweight build.
- Heavy Duty: The strength of thick steel allows the frame of our porch glider to support up to 352 lbs. of weight without issue.
Brand: Outsunny
Color: Black
Product Dimensions: 28.75"D x 23.5"W x 41.25"H
Back Style: Tight Back
Special Feature: Water-resistant, Arm Rest, Ergonomic, Wear-resistant, Quick-drying
Brand: Outsunny
Color: Black
Product Dimensions: 28.75"D x 23.5"W x 41.25"H
Back Style: Tight Back
Special Feature: Water-resistant, Arm Rest, Ergonomic, Wear-resistant, Quick-drying
Product Care Instructions: Wipe Clean
Unit Count: 1.0 Count
Recommended Uses For Product: Relaxing
Maximum Weight Recommendation: 407 Pounds
Style: Modern
Pattern: Solid
Finish Type: Lacquered
Room Type: Patio Garden
Age Range (Description): Adult
Included Components: Smooth Rocking Arms
Theme: Outdoor
Shape: Rectangular
Model Name: Gliding Chair
Arm Style: With arms
Surface Recommendation: Hard Floor
Seat Back Interior Height: 28 Inches
Furniture base movement: Glide
Indoor/Outdoor Usage: Outdoor
Seat Height: 17.25 Inches
Seat Depth: 16.75 inches
Seat Length: 19.25 Inches
Leg Style: Tapered Leg
Reclining Position Count: 1
Tilting: No
Is Customizable: No
Is Foldable: No
Chair Backrest Width: 23.5 Inches
UPC: 196393155189
Form Factor: Metal
Manufacturer: Aosom LLC
Item Weight: 23.1 pounds
Department: Unisex Adult
Country of Origin: China
Item model number: 84A-009BK
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 31
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Beige
The chairs are well made, durable and comfortable but light enough to easily move around. The color is perfect for our sun porch. The size is adequate, they were easy to assemble and they function perfectly for what we needed. We are average size and the chairs are comfortable.
Reviewed in the United States on April 26, 2025 by Jannydd
Color: Sand
Love these chairs! Very easy to assemble, very well built, very quiet and comfortable.
Reviewed in the United States on April 16, 2025 by Bruce
Color: Brown
I absolutely LOVE this glider chair!!! This glider fits your back perfectly, has a neck rest to cradle your head, has supportive arms, is comfortable on your legs, and rocks/glides so effortlessly and smoothly, like a dream! It's everything I ever wanted in an outdoor/porch rocking chair!! Many reviewers complained about the instructions, but we got through them ok, though the pictures were small. Also the picture of the chair on Amazon is ASSEMBLED BACKWARDS, so don't go by that picture!!! (The stabilizing bar between the base unit legs is supposed to go in the BACK, otherwise, your ankles will hit it - OUCH). So if you get this chair, which I highly recommend, SAVE THESE HELPFUL INSTRUCTIONS for when you put it together: Open the Instructions to the PARTS LIST and make sure all parts/tools were included (we had all the parts). PICTURE 01: Assemble half of the base. Lay one C-shaped base leg (B) down on a table with the holes that have the ridges around them facing up (this is easier than the way the picture shows with the legs standing up). Take one of the straight support bars that have T-shaped ends (E)(1) and align its holes with one of the ridged sets of holes on the base leg (B). Put an (O) ring on a short screw (K) and guide it through the support bar hole and into the base hole, tightening the screw with the little allen wrench (AA). Repeat with the other hole of the support bar (E)(1). Do the same thing with the second support bar (E)(2) into the other set of ridged set of holes on the base leg (B). PICTURE 02: Assemble the other half of the base. Lay the other C-shaped base leg (C) down on a table with the holes that have the ridges around them facing up. Align the support bars (E)(1) and (E)(2) to the mirrored holes on base leg (C), again putting an (O) ring on each short screw (K) and guiding them through the support bar holes and into the base holes, tightening all the screws with the allen wrench. (It is helpful if someone holds base leg (B) for you.) PICTURE 03 (A): Attach the glider swinging mechanisms. Set the completed base upright on its legs, with one of the sides facing you. Pick up a swinging mechanism (H) (looks like a little paddle). Hold it up vertically in front of you so that an indentation is at the top and a protrusion is at the bottom. HINT: the little hole in the arm of the paddle MUST be closer to the top. Now align the top of the paddle, indentation towards you, with one of the holes on the side of the base unit that is on the top portion near the curve. The paddle goes on the OUTSIDE of the base. Put a very long screw (N) through the indentation top of paddle, all the way through the side of the base until a little of the screw comes out on the inside of the base leg. Put an (O) ring and a nut (P) on that little bit of screw on the inside and tighten it (it helps to hold the nut still with a wrench and use the allen wrench on the screw head to tighten the screw into it). Repeat until all 4 paddles are screwed on to the OUTSIDE of the base, with the indentation at the top and the protrusion at the bottom, and the little hole on the arm closer to the top. PICTURE 03 (B): Connect together the front paddles, and then the back paddles. Place a connector bar (D)(1) in between the front two paddles (inside the base unit), aligning it to the little holes towards the top of the paddles. Install the connector bar so that it is tall, not wide. Put an (O) ring on a short screw (L) and guide it through the little hole on the OUTSIDE of the paddle and into one end of the connector bar, tightening the screw with the little allen wrench. Repeat with the other paddle on the front. Now do the same thing to connect the back two paddles with the other connector bar (D)(2). PICTURE 04: Connect ONE top/arm unit. IMPORTANT: with the base unit still set upright on its legs, the side facing you, place one of the top/arm units (A) against the outside of the base unit so that the indented curved portion is towards the front of the base unit (where the legs have an opening between them) and the opposite straight portion is towards the back of the base unit (where the legs are connected with a bar between them). (If you don't do this, the chair will be assembled backwards, like the Amazon picture shows!) Lift the top/arm unit up a few inches so that the holes in the bottom portion align with the protrusions on the bottom of the two side paddles. Put a very long screw (N) through the bottom of the paddle from the INSIDE of the base unit going OUT all the way through the holes of the bottom portion of the arm unit until a little of the screw comes out on the outside of the arm unit. Put an (O) ring and a nut (P) on that little bit of screw on the outside and tighten it (it helps to hold the nut still with a wrench and use the allen wrench on the screw head to tighten the screw into it). Repeat with the other paddle on that side. DO NOT ATTACH THE OTHER TOP/ARM UNIT TO THE OTHER PADDLES YET. PICTURE 05: Connect together the front of the top/arm units, and then the bottom of the top/arm units. FRONT: Align a connector bar (F)(1) to the hole on the inside of the top/arm unit below the curve under the indented area. Put an (O) ring on a long screw (M) and guide it into the hole on the outside of the arm unit into the connector bar (F)(1) and tighten. BOTTOM: Repeat by screwing the other connector bar (F)(2) to the bottom of the top/arm unit. Now, set the second top/arm unit (A) in place against the other side of the base, so the indented curved portion is towards the front of the base unit (mirroring the other arm). Lift the top/arm unit up a few inches so you can align it with both the front (F)(1) and bottom (F)(2) connector bars, and screw them together, as above. YOU WANT TO CONNECT THESE BARS BEFORE YOU CONNECT THE ARM UNIT TO THE LAST TWO PADDLES. Once connected, then align the bottom of the paddles with the bottom portion of the arm unit and screw them together just like you did on the other side. PICTURE 06 (A): Attach the chair (back). Place the back of the chair near the back of the base and inside of the arms. About 8" up from the seat, there are holes on the side supports of the chair back. Align these holes to the holes in the back curve of the arm unit. Put a long screw (N) into the outside of the arm unit until it goes through, then put a thick washer (J) onto the screw between the arm and the chair back, and then guide the screw through the hole of the chair back until it sticks out a little behind the chair. Put an (O) ring and a nut (P) on the end of the screw that sticks out and tighten it using a wrench and an allen wrench. Do the same on the other arm to the other side of the chair back. PICTURE 06 (B): Attach the chair (seat). Fold the seat of the chair down so the front of the seat is near the front of the arm unit, right at the indentation area. Put a long screw (N) through the outside of the arm unit, just below the indentation, put a thick washer (J) onto the screw between the arm and the chair seat, and then guide the screw through the hole of the chair seat until it sticks out a little underneath the seat. Put an (O) ring and a nut (P) on the end of the screw that sticks out and tighten it using a wrench and an allen wrench. Sorry, this is tricky because it is underneath the seat! Do the same on the other side of the chair seat, to the other arm. Now go back through and check all the screws, tightening if needed. Congratulations, your chair is done!!! This took me much longer to write than it did to assemble the chair (which only took about an hour), so I hope it really helps those who have difficulties with the instructions that came with the chair!
...
show more
Reviewed in the United States on May 23, 2023 by Honestly Speaking Honestly Speaking
Color: Beige
Bought 2 chairs. Beautiful, comfortable smooth gliding chair. First chair took awhile to assemble. 2nd chair was missing a part. However, Outsunny responded quickly to email requesting part be shipped to us. Bought the cream color, and it will perfect on my new porch.
Reviewed in the United States on May 3, 2024 by Mary Jo Sink
Color: Sand
Even if money weren’t an issue, these chairs are great. I almost didn’t buy them because one lady talked about an ill placed bar hitting her back in a weird spot. Honestly, I can’t imagine why she has an issue with the bar she’s talking about. I’m glad I pulled the trigger anyway. These are the kind of chairs you see at a hotel pool-no nonsense, easy to clean, but IT GLIDES and the gliding mechanism is simple and smooth. There is one bar that has a brand plaque that says outsunny on it but when you are assembling, you can turn the bar so that it doesn’t show. I have zero problems with these chairs. Super easy to assemble, instructions were great, they look fantastic, the size is perfect, they make NO noise, and all the holes lined up perfectly. For ease of assembly I used my drill. It took me about 15 minutes by myself, and I’m a 54 y.o. woman. I bought one at first because the bad reviews made me nervous and I thought the price was too good to be true or they were a weird smaller size or something. Once I put the first one together and saw that it was a great chair, I bought one more. Now I’m considering two more. Great purchase, I just love the motion, I think life is too hectic not to be super comfy in your downtime.
...
show more
Reviewed in the United States on June 18, 2024 by Kim Rubino
Color: Brown
Really very comfortable and sturdy gliding chair. Fairly easy to assemble. I would offer one caution: this must be on a completely level surface to glide without any interference from its own parts. Once it is level, it is a joy to sit in
Reviewed in the United States on May 12, 2025 by Russ Reising
Color: Beige
I bought 2 of these chairs for our patio. They were a gift for my husband for his birthday. It took us an hour with us both working together to put each of the chairs together. The instructions aren't great, but are sufficient. If you have put enough furniture together you will figure it out. When we DID get them together and out onto our patio, they are comfy and sturdy without being overly heavy. They glide easily, smoothly, and without any noise or creaking. I can easily pick them up to move them. We have had them up for a week and have enjoyed sitting in them every day. To preserve them from sun and rain, we bought some heavy plastic covers. They sit 24/7 in full sun on our patio.
...
show more
Reviewed in the United States on March 15, 2024 by ABC
Color: Brown
Easy to put together, sturdy chair! Worth the money.
Reviewed in the United States on April 2, 2025 by sharon