Performance Cold Air Intake Piping Kit for 2012-2018 Jeep Wrangler 3.6L V6 (MS-JQTJ-027) - Black & Black

Features

• Boosted Power & Torque Unlock your engine's full potential with an optimized cold air intake. Experience increased horsepower for sharper acceleration and stronger performance at high speeds. Enhanced torque delivers more responsive throttle control and improved pulling power when climbing or hauling.
• Reusable High-Efficiency Filter The multi-layer cotton filter delivers over 98% filtration efficiency and is fully reusable. Simply clean it every 100,000 miles to keep your engine protected from contaminants. A pre-filter helps block larger debris, extending filter life in dusty conditions.
• High-Flow Tube The system features a large-diameter aluminum intake tube with smooth walls and precision bends to minimize airflow resistance. A steel heat shield blocks engine heat, directing cooler, denser air into the engine for more efficient combustion.
• Aggressive Sound & Refined Cruising Enjoy a deep, aggressive intake roar under acceleration that showcases your engine's performance, while maintaining a smooth, quiet ride at cruising speeds. Strikes the perfect balance between thrilling sound and everyday drivability.

Description

Fit for 2012-2018 Jeep Wrangler 3.6L V6 Whether it fits yours'vehicle, Please MATCH your vehicle model on the left top before purchasing Each intake kit comes with a huge, highly-efficient air filter which results in better performance and better protection for your engine. Most new design are now dry filter instead of oil filter. Our filter do not require oil, it is reusable and washable. You can wash it with soap and water, rinse it until it is all dry up and use it again. We recommend you to check every 5,000 miles to see if it needs to be wash / clean. Silicone is a premium rubber which seals better and lasts longer. The air filter, couplers and tube seals in our intake kits are made from our premium silicone rubber. This means they won't crack, has exceptional tear strength, and can handle temperatures as high as 400F. Also, with a high friction surface and no oily residue, our silicone filters and couplers won’t slide off the tube. MOOSUN air intakes are very easy to install on your car or truck. A typical air intake installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less! MOOSUN specifically engineers their intake kits to use existing factory holes and mounting points, making installation simple. The vast majority of MOOSUN cold air induction systems do not require any cutting or drilling. Step 1 - Make sure your engine is cool to the touch. Step 2 - Disconnect your battery cable from the negative terminal. Step 3 - Remove your old air intake. Step 4 - Attach the silicone coupling that came with the air intake kit to the throttle body. Step 5 - Secure the coupling by tightening a hose clamp at the end. Step 6 - Place another hose clamp on the front of the coupling, but don’t tighten it just yet. Step 7 - Slide the intake tube into the silicone coupling, and ensure that your intake pipe is running from the throttle bay away from the engine bay. Step 8 - Tighten the silicone coupling and secure all brackets on the tube. Step 9 - Plug the mass air flow sensor into the new cold air intake system. Step 10 - Reconnect the battery.Enjoy the new power boosts immediately!

Product Grade: Replacement Part

Brand: MOOSUN

Fit Type: Vehicle Specific Fit

OEM Part Number: MS-JQTJ-027

Number of Items: 1

Brand Name: MOOSUN

Model Number: MS-JQTJ-027

OEM Equivalent Part Number: MS-JQTJ-027

Manufacturer Part Number: MS-JQTJ-027

Number of Items: 1

Manufacturer: MOOSUN

Unit Count: 1 Count

Item Weight: 3 pounds

Product Grade: Replacement Part

Fit Type: Vehicle Specific Fit

Automotive Fit Type: Vehicle Specific Fit