Search  for anything...
Kitchener

Kitchener Chicken Plucker De-Feather Remover Poultry and Fowl Food Processor Electric Stainless Steel Heavy Duty 1HP 120VAC 280RPM GFCI Connector 92 Soft Fingers 20" Drum Diameter

    • Based on 863 reviews
Condition: New
Checking for product changes
$530.99 Why this price?
Save $28.00 was $558.99

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 10 left in stock, order soon!
Fulfilled by Amazon
Arrives Thursday, May 23
Order within 14 hours and 24 minutes
Available payment plans shown during checkout

Recently Viewed

Features

  • SPECS; Our Heavy Duty Chicken Plucker De-Feather Poultry and Fowl Processor utilizes a 1HP 120VAC 800W 280RPM Planetary Gear Transmission Reduction Motor; 92 soft fingers, large 20" inch dia. drum, Barrel Thickness 0.6mm and Panels Thickness 0.3mm
  • ADVANCE DESIGN; Our Plucker has a robust compact design for easy storage and transportation, including 2 wheels for optimal maneuverability; Built of premium safe and sanitary 403 Brushed Stainless Steel body/base (protecting from rust)
  • PROFESSIONAL CAPABILITIES; Our powerful, reliable Fowl and Poultry Feather Plucker has a durable structure, capable of 2-4 birds at one time in just 15-30 seconds per foul (that's 3-4 in under 2 minutes) (depending on the size of the fouls and if properly scalded, will guarantee high speeds and efficiency)
  • SAFETY; We recommend to always use eye and hand protection; We use an Overcurrent Protector GFCI Connector switch, with a waterproof IP54 weather-resistant electrical housing for optimal safety; (Note; Never Pluck frozen fowl)
  • PROPER USE; This commercial grade Plucker is perfect for farms and food processing facilities; (ATTN; CONNECT PROXIMITY SENSOR SWITCH CORRECTLY, instruction on youtube); Follow scalding instruction, under technical specs in the product information section

Description

Our Chicken Plucker is a Heavy Duty Commercial De-Feather Remover Poultry & Fowl Food Processor, built of premium safe & sanitary 403 Brushed Stainless Steel body/base (protecting from rust). Utilizing an all-powerful 1HP 120VAC 800W 280RPM Planetary Gear Transmission Reduction Motor w/ an Over-current protector GFCI Connector. Included w/ 92 soft fingers in a large 20" drum dia. w/ a Barrel Thickness: 0.6mm. (0.023 or 1/32 in.) & Panels Thickness: 0.3mm. (0.011 or 1/64 in.) Our powerful & reliable Fowl & Poultry Feather Plucker has a durable structure capable of 2-4 birds at one time, in just 15-30 seconds per foul, that is 3-4 in under 2 minutes (depending on the size of the fouls & if properly scalded, will guarantee high speeds & efficiency) making the job quick'n easy & effortless. Our Plucker has a robust compact design for easy storage & transportation, including 2 wheels for optimal maneuverability & a 3 leg for extra stability & support. We recommend to always use eye & hand protection. This Plucker is of commercial outdoor grade, perfect for farms & food processing facilities. We use a GFCI switch & waterproof IP54 weather resistant electrical housing for optimal safety. ATTENTION: ALWAYS CONNECT PROXIMITY SENSOR SWITCH CORRECTLY, instruction can be found on youtube. Note: Never Pluck frozen fowl & follow the scalding instructions, downloadable under technical specs in the product information section.

Brand: Kitchener


Special Feature: Built In Grinder


Product Dimensions: 22"D x 23"W x 22"H


Color: Stainless


Number of Speeds: 2


Brand: Kitchener


Special Feature: Built In Grinder


Product Dimensions: 22"D x 23"W x 22"H


Color: Stainless


Number of Speeds: 2


Product Care Instructions: Hand Wash


Included Components: Container, Lid


Blade Material: Stainless Steel


Item Weight: 68.9 pounds


Manufacturer: Intradin (Shanghai) Machinery Co., Ltd.


Item model number: FP-100-USED


Is Discontinued By Manufacturer: No


Date First Available: October 26, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Thursday, May 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Amazing Amazon Lightening Deal! Quality product, easy to assemble, easy clean & move around!
Review Image by Stormin AK Stormin AK
Review Image by Stormin AK Stormin AK
Review Image by Stormin AK Stormin AK
Amazing Amazon Lightening Deal! And what a true deal this was! A quality made product, the only one with free shipping to AK to boot. It’s a big deal to me because shipping alone to AK for pluckers are easily $400-600, costing as much or more than the actual product. Assembly is very simple, easy to clean up, easy to move and a great price. I like that the wheels only roll and make contact with the ground when tilted to move, which make it very stable while in operation. The only modification I will make to my plucker is to extend the feather waste shoot down beyond manufacturer’s specs and angled away from the motor so the feathers don’t get sucked in and lodged up in there. This one doesn’t have the water valve attachment to hook up to hot water while in operation, so we used a bucket filled with hot water and that worked even better, plus it really stripped the feathers faster & flushed the feather waste out quickly. I highly recommend this plucker! Update 7/19/20: I’ve added pictures to show my simple adaptation to prevent the feathers from getting sucked up in the motor. I used a cutting board, angled it under the shoot with a rock and it works like a charm. I also recommend having an ideal scald temp (we use 148- 150 degrees) and a proper soak, it is key to not running the machine as long = less possibility of broken limbs. We put in less birds, doing two Cornish cross birds at a time, to minimize bone breakage and run the machine for a shorter amount of time. ... show more
Reviewed in the United States on July 25, 2019 by Stormin AK Stormin AK
    • Works GREAT
I've been processing chickens for 3yrs now. By far having a plucker even for small batches saves a lot of time. I was worried about the speed since it seemed slower than the ones I've rented but this one works just fine.
Reviewed in the United States on October 26, 2023 by Kim
    • Great for full grown chickens
This works amazingly well on full grown chickens. Once you figure out the proper temperature for scalding, the feathers come off with ease. However, this is a little rough on young chickens. You end up with some tears in the skin for them.
Reviewed in the United States on October 21, 2023 by S. Sizemore
    • A terrific timesaver (with a caveat about what seems to be a common problem)
First, the good: the plucker has wheels that allow for easy movement. There are plenty of "fingers" in the tub and on the spin plate to get the job done, and the job is done very well. It took maybe a minute or so to fully pluck a bird. I was doing one at a time, as it was just me doing all the processing, and there were very few feathers I had to pull after giving the birds a tumble. I suspect if I'd done two birds at a time, even those feathers would have been removed. I found the feet tended to get caught up in the fingers in the tub, so I removed the feet after scalding and before putting the bird in the plucker. The bad: one, the description lists this with a "Integrated irrigation ring, with standard garden hose connector". It does NOT have this feature. You'll need to use a hose to spray the birds while they are tumbling. In addition, I ran into the same problem quite a number of other reviewers encountered: it would not power on, despite everything being set up correctly. I contacted the seller, indicating I'd disassembled and then reassembled the thing, as well as ensuring the proximity switch was seated properly. Their support wrote me back, telling me to make sure the arrows were aligned and that the proximity switch was connected - things I'd already told them was the case, and even sent them a picture (that was better than the one they sent me) showing the switch correctly in place. It is a little annoying to have this sort of response, but the guy was polite, and the response relatively quick. The legs really need better bolts, as the legs wobble, and this allows the plucker to "walk" when it's tumbling birds. I disassembled the thing again, and had a look at the proximity switch and tub, lined them up and it felt like the magnetic connection wasn't very strong: there was about a 2mm space between the top of the switch and the bottom of the tub connector. I thought about just drilling up the screw holes in the connector a little to force it to sit higher, but then had a better idea: I have a bunch of tiny, circular magnets, ranging in size from 2mm to 10mm. I grabbed a 2mm magnet, slapped it on top of the proximity switch, and voila! The plucker powered on and spun. If you're going to be processing a lot of birds, this is a good investment at a reasonable price, and this product works very well to get the birds plucked quickly, taking off a ton of time in the processing. It can be a bit hard to clean, as some feathers can get caught up in and wrapped around the base of the fingers, but dealing with those is a pretty good tradeoff versus having to pluck by hand. Overall: recommended. ... show more
Reviewed in the United States on October 19, 2018 by AC
    • Feathers Be Gone In No Time!
The media could not be loaded. Works fast. Works great. We have processed 24 meat birds so far and it’s been amazing. Feathers come right off. Simple to use. Simple to clean.
Reviewed in the United States on July 29, 2023 by Awaken Farm
    • Easy to assemble
Review Image by Kindle Customer Kindle Customer
Just received my clucker plucker and it is in perfect shape. I was worried it would be beat up from shipping because of some of the reviews I have read. I assembled everything that needed assembled, plugged it in and it worked just fine. I can't hardly wait to have it pluck my first chicken. I will update my review at that time. UPDATE: I have finally had a chance to use my plucker, and let me just say this, It is fantastic! Less than 30 seconds per bird. Due to our set up we can only process 1 bird at at time and this kitchener plucker paid for itself in the time it saved us. We had a couple of the larger birds retain a couple of feathers, but I think it was my singing temperature. All in all I highly recommend this plucker. ... show more
Reviewed in the United States on March 2, 2023 by Kindle Customer Kindle Customer
    • Good plucker for the money
You will have to build a base for this machine or it will dance around the room. That said, the machine works great on up to 8 lb birds and probably larger although I don’t know this.. We scald and pluck about 70 birds at a time. This machine holds up well and is the best I’ve ever used. A good value ... show more
Reviewed in the United States on August 1, 2023 by Klaus Hagen Holzer
    • Reassembly required
I haven't even used it yet but I don't have high expectations if quality control isn't important. I put all the legs on and installed the tub with the feather plate in it to the motor base only to find out the tabs to lock the tub to the motor base was at the top instead of on the bottom. I took it off and compared it to the instructions and realized the feather plate (the bottom piece that spins) was installed upside down but you can't just take it out and flip it around because the nipples on the tub are in the way. So now, I have to take off a retaining bracket that sits on the top to take the feather plate out so it can be installed properly. I would have returned it if I didn't need to use it right away because when I spend this amount of money on a product, I don't expect to have to disassemble it to install it. ... show more
Reviewed in the United States on September 16, 2023 by Daniel

Can't find a product?

Find it on Amazon first, then paste the link below.