K&N NextGen Cold Air Intake System: High-Flow Cotton Filter: Compatible with 2011-2025 DODGE/JEEP: Durango, Grand Cherokee, 50-1563
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE refund/replacement until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Saturday, Jan 10
Recently Viewed
Style: NextGen
Features
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine's stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The NextGen hybrid airbox features an enlarged factory fresh air inlet that is designed to improves airflow, lower inlet air temperatures, and deliver more fresh air to the engine. The air box adds an extra level of protection from contaminants, helping provide more clean air to your engine.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Simplified Installation: K&N NextGen air intakes were designed for quick and easy installation by minimizing the need for excess mounting hardware. Additionally, the air filter utilizes K&Ns Quick-Lock technology, which allows the air filter to easily snap into the air box. Lastly, an innovative sealing bead secures the filter with just one hose clamp, seamlessly connecting the filter, tube, and airbox into a unified system.
- Over 50 Years of Trusted Protection: Since 1969, K&N air filters have been extensively lab-tested and trusted by professional racers and automotive enthusiasts for their superior dirt-holding capacity, extended cleaning intervals, and exceptional filtration efficiency. All air filters feature 4 or 6 layers of premium pleated cotton gauze (application-specific), oil-tacking technology, and are ISO-5011 tested.
- Warranty: K&N NextGen intakes are backed by a No-Hassle Lifetime Limited Warranty and are designed to preserve your factory warranty. Our intakes have been proudly designed and engineered in the USA since 1969, K&N also offers dedicated, USA-based customer service for your convenience.
Description
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee V8 5.7L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 45.3% to your engine and provides an increase of 34.03 horsepower and 23.83 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.Compatible Vehicles:2009-2014 CADILLAC Escalade2011-2025 DODGE Durango2011-2021 JEEP Grand Cherokee
Product Grade: Performance Part
Brand: K&N
Fit Type: Vehicle Specific Fit
OEM Part Number: 50-1563
Manufacturer: K&N Engineering, Inc.
Manufacturer: K&N Engineering, Inc.
Brand: K&N
Model: Cold Air Intake System
Item Weight: 13 pounds
Product Dimensions: 24.2 x 20.2 x 15.6 inches
Item model number: 50-1563
Exterior: Machined
Manufacturer Part Number: 50-1563
OEM Part Number: 50-1563
Date First Available: April 1, 2025
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, Jan 10
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: Metal
First, I installed this on a 2018 Grand Cherokee Limited Sterling edition with the 5.7L equipped with the tow package. I have also installed K&N intake systems on at least 6 other vehicles over the last decade. As expected the fit and engineering is very good. It took less than 20 minutes to install - in part because there are not many factory mounting points and removal of the stock intake system takes about 2 minutes. After installing I took it for a 5 mile test drive - mainly to see what the noise level is. I was surprised how quiet the K&N system is for this vehicle. Probably the quietest intake I have installed to date, and it only has a slight grumble at full open throttle above 3,000 RPM. That is a good thing - my wife rolled her eyes when she saw the box arrive, and at idle and normal acceleration is really isn’t much louder than stock. Throttle response is slightly better and I have no idea if I’ll see an increase in mileage, but I’ve actually been happy with the 19-20 we have seen in the first 1,000 miles. As others have mentioned, be careful with the air sensor - it’s fragile but as long as you remove and replace by hand you will be fine. There is a metal coolant line on my Jeep that runs under the intake - I had to bend the bracket on the line to allow it to clear but you can also fine tune the angle of the intake tube before tightening the fittings on both sides. Looks great and I like the reusable / washable filter. I’d buy this again.
...
show more
Reviewed in the United States on June 27, 2019 by Desert Datsun Desert Datsun
Style: Roto-Mold
As described and easy to follow instructions!
Reviewed in the United States on November 8, 2025 by Lance Osen
Style: Roto-Mold
Fits great in a 2014 Dodge Durango R/T with no modifications. I wasn't sure if it was going to work in my vehicle because all of the information only showed compatibility with 2011-13 Durango with the 5.7L Hemi and the 2014s were a mid cycle refresh. This product fits great in a 2014 Durango R/T and I had no issues. It was very easy to install and the included instructions were clear and understandable. I was able to watch an installation video on youtube that improved my understanding of the installation and what my results should be. It took me around a hour to install the K&N filter kit and I think it looks great and sounds wonderful. I noticed faster throttle response and my 0-60 times dropped to 5.75 seconds. I was able to run the 1/4 mile in 14.04 seconds in a large SUV. I am quite pleased!
...
show more
Reviewed in the United States on December 16, 2013 by S. Johnson
Style: Roto-Mold
Sounds awesome! OK, so the claim about better fuel mileage is a stretch and many will deny that you'll get any horsepower but it certainly feels more powerful even if it is just my ears playing tricks on my other senses. Which brings me back to the sound. If you think your Grand Cherokee is too quiet like I did then this is the mod for you. It's not so loud that it is annoying, in fact you only really hear it when you are over half throttle but when you do it's sweet music for the soul. The only bad part about this product is the price. K&N charges A LOT for this. Too much in fact. I only bought mine because it was a "scratch & dent" special. There are other companies that get you almost the same thing except with aluminum tubing for $150 - $160. Some will claim you get more power with plastic tubing because it stays cooler but I really doubt it. As long as air is moving through the tube it stays cool. Yes, the K&N is built in America and the other brands are China built which is the only reason I paid more but hopefully these other companies cause K&N to reduce their prices a little, I'm sure they can still keep their lights on with a 200% mark up. They can claim R&D cost all they want but the filter technology was paid for a long time ago and the ducting route really isn't that complicated. And don't even get me started on AIRAID, those guys are robbing us blind! But I would certainly recommend this product as long as you can get a good price.
...
show more
Reviewed in the United States on October 20, 2016 by BSant
Style: Roto-Mold
👍👍🫵🫵‼️‼️♥️ very satisfied with the product. Worked as advertised and had no issue at all. Functionality is very satisfying. I would recommend this product for your vehicle. It's also very easy to install and nothing hard at all.
Reviewed in the United States on August 21, 2025 by T-man
Style: 50 State Legal
The media could not be loaded. The intake installation was a breeze. If you have the tools you need (8mm and 10mm sockets, ratchet with extension, 9/16 wrench, pliers and scissors/sheers), you are good to go. It took me about an hour between locating tools, reading directions and installation. If I had to do it again, should take 20-30 minutes now. The sound it makes now is awesome. See the before and after video I attached. The only issue I have is that I do not see a big 17bhp advertised gain in horsepower. But there surely is some. My 2012 Durango used to do 0-60 in 7.2 seconds when it had under 20k miles on it. I have a YouTube video of that. Now that it has about 70k miles, it was doing about 8.2 seconds. After I installed the intake, I see about 7.7 seconds. So, I recovered about half of the lost horsepower I had lost. I am happy enough with that. The best part is the sound it now makes and the RPM goes up much faster. Maybe a tune up will help. I also see some gain at higher speeds, but I don't have a quarter mile run numbers from my OEM intake. See Before/After pictures and video.
...
show more
Reviewed in the United States on June 24, 2018 by Sholokov Sholokov