Search  for anything...
K&N

K&N Cold Air Intake System: High-Flow Air Filter, Increase Performance & Towing: Compatible with 2009-2023 RAM/DODGE 1500 Classic, 1500, 2500, 3500, 77-1561KP

  • Based on 1,930 reviews
Condition: New
Checking for product changes
$399.99 Why this price?
Save $50.00 was $449.99

Buy Now, Pay Later


As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: 14 left in stock
Fulfilled by Amazon

Arrives Friday, Jul 18
Order within 19 hours and 13 minutes
Available payment plans shown during checkout

Style: Metal Intake


Features

  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
  • IMPROVED ENGINE SOUND - HEAR THE GROWL: K&Ns intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
  • PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
  • HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&Ns red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
  • EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
  • MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.

Description

K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your vehicle and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.Compatible Vehicles:2009-2010 DODGE RAM 1 RAM 1 RAM 2 RAM 3 RAM 1500 Classic

Brand: K&N


Product Dimensions: 18.25"L x 18.25"W x 12.5"H


OEM Part Number: 77-1561KP


Global Trade Identification Number: 54


Shape: Oblong


Brand: ‎K&N


Product Dimensions: ‎18.25"L x 18.25"W x 12.5"H


OEM Part Number: ‎77-1561KP


Global Trade Identification Number: ‎54


Shape: ‎Oblong


Manufacturer: ‎K&N Engineering


Automotive Fit Type: ‎Vehicle Specific Fit


UPC: ‎024844267054


Model: ‎Performance Air Intake System


Item Weight: ‎15.18 pounds


Country of Origin: ‎USA


Item model number: ‎77-1561KP


Is Discontinued By Manufacturer: ‎No


Exterior: ‎Chrome


Manufacturer Part Number: ‎77-1561KP


Date First Available: February 1, 2006


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Jul 18

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • un lujo!
Style: 50 State Legal
un lujo! excelente todo ! solo me faltaron unas abrazaderas para la toma de aire de gases del motor
Reviewed in the United States on May 24, 2025 by gerardo rolandi

  • Worth the price
Style: Roto-Molded
Easy to install just follow the directions and look at the pictures.
Reviewed in the United States on May 11, 2025 by John E.

  • Next Gen
Style: NextGen Cold Air Intake
Beautiful system makes the engine roar a little more and the truck breathes better.
Reviewed in the United States on April 23, 2025 by Shop Small Circle Shop Small Circle

  • You're gonna love it!!!
Style: Roto-Molded
Purchased this for a 2010 RAM 1500, 5.7L HEMI. The package and contents were all in good condition when I received it. No missing parts. Spent about 45 minutes assembling what I could without needing to touch the vehicle. Installing it in the vehicle took about 45 minutes; I would say the estimated 90 minute install time is pretty accurate. No problems with installing it per the instructions, but I did make some notes on the instructions that may help save you some time with your installation. I recommend watching the install video on the MFG website for this product if you want to know how easy it is to install! ►Installation Notes • You don't need to disconnect your negative battery cable to install this kit. Just make sure the key isn't in the ignition switch, i.e. that the ignition is turned OFF. This is a lot easier than writing down all the settings, reactivating radios, etc. This step was only mentioned to prevent the engine controller from reading a fault if power was applied to the IAT sensor while it was disconnected. • I trimmed the crank case vent tube 12 inches and still wound up trimming the provided vent hose (PN 5-4015) about 4 inches in order to install it on the vent -- plenty to spare so don't worry about precisely measuring the crank case vent tube. • Recommend using a tubing/PVC cutter to trim the vent tube, provided vent hose, and the edge trim. This makes the cuts super easy, especially for the hard plastic of the vent tube, and provided the edge trim! The edge trim has a metal insert (clip) in it to help it retain its shape and bite the edge of the heat shield. • The 4mm Allen wrench mentioned in the instructions is used on the M6 button head screws only. You will need a 3mm Allen wrench (not listed) for the M5 button head screws used to assemble the heat shield. • The zip-tie provided to secure the IAT extension harness is not long enough to go around the intake tube so plan on having some extra zip-ties handy. I used four (4), 8 inch zip-ties (two attached to each other to make two bands to secure the extension harness to the inlet tube. ►Performance Results There was nothing truly remarkable about the this intake when I started it up after the install. However, the results were immediately apparent when I took it for a test drive. The difference in the sound of the engine when accelerating is definitely noticeable, and truly amazing! You can tell right away that she can breath better with this intake because the sound of her HEMI rumble tells you so!! There was definitely a noticeable increase in HP, which I expect is around the value of the K&N test results (+15 HP). It is too early to say how much it will improve fuel efficiency, especially since it sounds so good...it'll be hard to keep my foot out of it! From what I found doing some research, most people see a 1.5 to 2 MPG increase in their fuel efficiency. ... show more
Reviewed in the United States on January 18, 2016 by AtlasV

  • 2018 Ram 1500 Bighorn K&N air intake
Style: Roto-Molded
Fits perfectly however; did not need spacer for fender install for airbox as advised. Would be helpful if instructions advised which screws and washers to use by install pictures and in description. Other than that; exhaust note is throatier at start and under load. Feeling the torque! Great addition. Hope gas mileage improves over stock a bit. ... show more
Reviewed in the United States on January 12, 2025 by Jill Heller

  • Worth it
Style: Roto-Molded
Rotoform with oil filter. Fitment is flawless, came with everything needed for my 2013. Took 45 minutes to install. Throttle response is slightly improved, highway mileage went from 16 to 18 MPG. City mileage mostly unaffected. Intake noise is obvious when you put the hammer down but not obnoxious. Overall I’d give it a 8/10. A fully enclosed box with a cold air snorkel would be ideal but this is a great quality piece of kit. ... show more
Reviewed in the United States on January 6, 2025 by Tim Filer

  • Looks Great - Sounds Awesome
Style: Metal Intake
For all you guys out there...I am a woman and I installed this on my 2009 Dodge Ram Hemi 5.7L. It took under 2 hours from opening the box to putting the last tool away. I took the time to clean up the engine under the cover since I had it off. I also Armoralled the engine cover. I didn't encounter any issues with the silicone tubes or finding the fender bolt as some did. The directions were pretty straight-forward with clear pictures. The entire system looks really awesome, although I don't think many people will ever see it. They have a hard enough time seeing the truck as it flys down the road! Now, it is going to be even harder to see. I had changed out the stock dual exhaust with a slightly louder Magnaflow right after purchasing the truck, so this truck has always sounded great. Dodge has a nice throaty sound anyway. The K&N intake makes that sound much deeper. It looses any hint of tinniness, and what comes out the exhaust sounds like it definitely came all the way from the heart of the Hemi. It does resinate a bit more at idle when sitting in the garage. But when you step on it, you can hear and feel the power difference. My son sent me a text message and said: FYI...They forgot to tell you that you now run the risk of sucking small animals, bystanders, and compact cars into your grill upon accelleration! LOL I will be checking the impact on gas mileage at some point and will check back on that issue. But, I didn't buy a Hemi for gas mileage! I would definitely recommend this product. It is well worth the investment. Amazon does have the best price. I researched that thoroughtly. I have always used the K&N filers (air and oil) and have been comtemplating this purchase for almost three years. I am glad I finally did it. The only thing I can say is that for the money, K&N should provide a new intake ir temperature sensor so you don't have to remove the existing one from the factory intake. Had I broke that getting it out, I would have been stuck with no way to get to the auto supply store. Having that part would have saved installation time and eliminated worry about breaking the old one. ... show more
Reviewed in the United States on October 17, 2012 by KAREN S.

  • A must buy air intake system 2013 ram longhorn HEMI 65000 miles
Style: Roto-Molded
This is by far the best engine upgrade under 350 bucks that makes a huge improvement. Got it on December 4. Took only 1.5 hrs to complete install. The difference was instant. Louder and performance is great. I can’t say anything about mileage but right now I’m getting 13.4 in 2 weeks I will update Mpg was 13.2 Now 14.1 ... show more
Reviewed in the United States on December 5, 2024 by Martinez Martinez

Can't find a product?

Find it on Amazon first, then paste the link below.