Culligan RC 4 EZ-Change Water Filtration Replacement Cartridge, 500 Gallons, 1 Count (Pack of 1), White
Condition: New
Buy Now, Pay Later
As low as
$8.25
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Eligible for Return, Refund or Replacement within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Aug 31
Recently Viewed
Size: EZ-4 (Best Filtration)
Style: Replacement Filter
Features
- Provide your family with visibly clean, great-tasting water for drinking and cooking
- FEATURES: Reduces water bad taste and odor, Chlorine taste and odor, sediment, lead, and cysts such as Cryptosporidium and Giardia, Mercury, Turbidity, Particulate Class I, VOC's, MTBE and Chloramines; Can be installed in your EZ-Change filter system under the sink or in the refrigerator for clean water and ice
- COMPATIBILITY: Works with Culligan US-EZ-1, US-EZ-3 and US-EZ-4 systems
- FILTER LIFE: Up to 500 gallons or 6 months depending on usage and filtration load
- CERTIFICATION: Tested/certified by IAPMO to NSF/ANSI Standard 42 for the aesthetic reduction of Chlorine Taste/Odor, Chloramines, and Nominal Particulate Class 1; Standard 53 for reduction of Cysts, Mercury, lead, VOC, MTBE and Turbidity
Description
Premium EZ Change replacement cartridge provides clean, great-tasting water for drinking and cooking. The RC-EZ-4 basic filtration cartridge is compatible with Culligan US-EZ-1, 3 and 4 systems and can filter 500 gallons and last up to 6 months. Avoid the mess of changing traditional cartridges and eliminates the need for buckets, towels, wrenches, and other tools. Tubing and installation hardware is included. From the Manufacturer The Culligan RC-EZ-4 EZ-Change Level 4 Replacement Cartridge is a drinking water replacement filter that reduces bad taste and odor, Chlorine taste and odor, sediment, lead, and cysts such as Cryptosporidium and Giardia, Mercury, Turbidity, Particulate Class I, VOC's, MTBE and Chloramines. From the Manufacturer The Culligan RC-EZ-4 EZ-Change Level 4 Replacement Cartridge is a drinking water replacement filter that reduces bad taste and odor, Chlorine taste and odor, sediment, lead, and cysts such as Cryptosporidium and Giardia, Mercury, Turbidity, Particulate Class I, VOC's, MTBE and Chloramines.
Material: Plastic
Product Dimensions: 4"D x 4"W x 13"H
Item Weight: 2.69 Pounds
External Testing Certification: ANSI, NSF
Product Benefits: Removes Odor
Material: Plastic
Product Dimensions: 4"D x 4"W x 13"H
Item Weight: 2.69 Pounds
External Testing Certification: ANSI, NSF
Product Benefits: Removes Odor
Brand: Culligan
Manufacturer: Culligan
Part Number: 01019057
Item Weight: 2.69 pounds
Country of Origin: USA
Item model number: RC-EZ-4
Is Discontinued By Manufacturer: No
Size: EZ-4 (Best Filtration)
Color: White
Style: Replacement Filter
Pattern: Cartridge
Item Package Quantity: 1
Number Of Pieces: 1
Water Consumption: 500 Gallons
Cutting Diameter: 3 Inches
Mounting Type: Plate Mount
Certification: Chlorine Reduction
Included Components: 1 Filter
Batteries Included?: Yes
Batteries Required?: Yes
Battery Cell Type: Nickel Oxyhydroxide
Assembled Diameter: 3 Inches
Date First Available: August 17, 2005
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 31
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: EZ-1 (Good Filtration)
Style: Under-Sink System + Filter
I had one of those filters that you put on the end of your faucet for a number of years. It worked pretty well until I finally noticed that water had started leaking out from the base of the faucet neck. Apparently after all this time the back pressure caused by that filter and the weight of it levering down on the neck was causing the internal gaskets to fail. I removed the filter and the leaks stopped. But, this left me without filtered water. I wanted filtered water still but without the hassle of a pitcher in the fridge or having to replace my entire faucet due to the back pressure and levering caused by the on the neck one. Looking on Amazon I found a number of filters of varying prices and ultimately I decided to take a chance on this Culligan unit because the price was decent, the name is well known to me, and it had pretty good reviews. So far in the month or so that I've had it installed I'm quite satisfied with it. The water comes out at a very decent pressure, far better than my old on the faucet based filter. The kit comes with a plastic bracket that fits to the wall, some plastic tubing, a little adapter to put in-line with your cold water feed, some screws, the filter cartridge and the faucet. The faucet is not a super high quality item. It's mostly plastic, but it feels pretty solid for my needs. It actually comes in several pieces that you put together during the installation. I started my installation by drilling a hole in the sink. Make sure you have a sharp drill bit of the right size. The size they ask for is 5/8" which is one size larger than you'll find in most off the shelf drill bit sets. I thankfully had a 3/4" bit laying around from a different project, but my bit was fairly dull after that previous project so drilling was a bit of a challenge for me. I compared my 1/2" bits to the threaded stem on the base of the faucet and decided it just was not worth the risk of making too small a hole. The threads on the stem are all plastic and could be easily damaged by jamming the works into a hole that wasn't big enough. So do yourself a favor and get the right size drill bit before you start. After I had the hole drilled I unscrewed the wing nut from the base of the faucet and removed the metal plate. This left a plastic gasket on the base of the faucet that came off and I had to put back in place. After looking at the pictures I finally realized that the handle is supposed to go on the side of the faucet so I set the faucet in the hole and then reached under the sink to put the metal plate on and thread on the nut. Be careful not to over-tighten this as you could easily strip those plastic threads. Once it was snugly on the base felt pretty solid. I then took the neck of the faucet and attached it to the base and it looked pretty sharp, with no sign of the mangled hole I had drilled to put this in place. Next I shut off the cold water and proceeded to disconnect the feed line from the cold water connection on my faucet. I applied a little nylon plumbers tape to the connection and screwed on the plastic connector that came with the kit. A little more plumbers tape on the bottom and I reconnected the cold water feed line. After that I took the plastic bracket and using a sharpie clearly market the in and out sides so I wouldn't get confused later and hung it on the back wall with the included screws. Once all the major pieces were in place I took the plastic hose line, this is the same diameter as the kit that feeds my ice maker on my fridge, and carefully measured and cut two sections. On the base of the faucet you'll have a little plug that goes into the tube and a collar that goes over the hose. This threads onto the base of the faucet and once snugged down creates a good connection. The other end you simply wet and insert into a friction lock on the plastic bracket. The other line is even easier as it uses the same friction locks on both the hose line adapter and the plastic bracket. Finally I took out ye olde sharpie and wrote the date on the filter to remind me when I had installed it and connected it to the bracket by twisting it into place. Once it was snugly connected on went the water and after a quick check for leaks I turned on the faucet and a jet of water came streaming out. The instructions say you have to let it run for about ten minutes or so to let it flush out material from the filter. After the directed time I filled up a cup of water and tasted the sweet tasteless taste of success. The best part is that there is absolutely no impact to the water flow on my regular faucet and the new faucet provides water at pretty much full pressure. I'm sure this will go down over time but it is much better than my old filter. Looking at this solution I can see where if I ever so desired to step up to the two or three cartridge solution I could easily swap out the bracket by simply removing the plastic hoses from the friction locks. So if you are questioning whether you need the single cartridge or three cartridge solution know that you should be able to easily upgrade.
...
show more
Reviewed in the United States on August 25, 2012 by Bobmon
Size: EZ-1 (Good Filtration)
Style: Under-Sink System + Filter
UPDATE Sep 2019: It's been more than a year using the SAME CARTRIDGE. Our water processing plant is currently having issues with the quality of water and its coming out of the pipes very dirty. Using just the BASIC cartridge, the water comes out crystal clear, drinkable. This baby is amazing. Still no leaks whatsoever. Buying another replacement cartridge now just in case. Oh, the nut that tightens the unit to the sink broke because its plastic. Just buy a steel nut and problem solved. Should cost you like 3 dollars. ------------------------------------------------------------------------------------------- ORIGINAL REVIEW: After reading the reviews on this, I was skeptical. Some people said that the filter was not of enough quality or that it would not filter the necessary impurities. I considered that we live in a metropolitan area where the city water is just about decent. So we went with the basic filter option. Also, a reverse osmosis system is very expensive and wastes a ton of water (about 3 gallons of waste per 1 gallon of drinkable water). I have to say the results are amazing, even with the Basic filter: - No solids or visible impurities in the water. This means no "floaties" or "flakes" which is the way people refer to the calcium, manganese or magnesium precipitates that can be seen in cold or room-temp water. Although these precipitates are harmless (they in fact occur naturally in other foods we eat), they taste funky and look rather discouraging to drink. This filter took out all of that. - The taste of the water is great. Even at room-temp, the water is easy to drink and delicious. - the water pressure is quite nice with the basic filter. (see pictures) As for the installation, just follow the instructions and a few Pro-tips: PRO TIP: The mark included in the white silicone tube is 5/8 inch long. When you cut the tube to your liking, go ahead and mark the other side so you'll have no trouble fitting it to the right depth. PRO TIP: If you need to drill the extra hole in your sink. It will require the 9/16 bit. I tried the 5/8 hole as mentioned in the instruction, but the white tube does not fit. Use these to drill the hole: - TEMO M35 cobalt 9 size double flute step drill 3/8" shank 1/4" to 3/4" - CRC 03400 16oz Truetap Cutting Fluid Heavy Duty - Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter You can check out my reviews on these 3 tools as well, for more details on how to use each for this application. PRO TIP: DO USE plumber's tape (the white one) on all male fittings. This will ensure no leakage. PRO TIP: when i first turned on the water, nothing came out. This was because the filter needed to click TWICE when tightening it in. Just make sure its nice and tight. Installation observations: - No leaks whatsoever were observed. A few people have complained about leaks, for us, this was not the case. We did use plumber's tape. - The process was very straightforward. Took us more time to clear out the area under the sink, than it took to install. - We left the filter loose (did not mount with screws) to be able to take it out and replace it easier.
...
show more
Reviewed in the United States on August 7, 2017 by Rummy Rummy
Size: EZ-4 (Best Filtration)
Style: Under-Sink System + Filter
Fairly easy to install. I didn't have any leaks. Water comes out cloudy at first but then clears up as it settles (I guess from going through the filter media). Tastes a little different than before, but maybe that's because I'm used to the chlorine taste that it previously had and now it has no taste?. Overall, very satisfied. I did call tech support for a question on how far the tubing went into the culligan faucet (5/8 inch or all the way which is about 2 inches) because the manual wasn't clear here (just said to push 'firmly' into the faucet). The tech did not call back until the following day, but said it only goes in a short distance so the ferrule compression ring compresses on the tubing where the T insert is fitted into the end of the tubing. Makes sense to me...the insert gives it strength so the compression washer doesn't crush the tubing. I originally had the tubing pushed all the way into the faucet and still did not have a leak. Another thing I did was to cut a piece of 5/8 inch plywood to use as a template that I could hold firmly against the wall to drill the hole in a granite countertop for the faucet and to keep the bit from walking. I drilled a 5/8 inch hole (same size as the bit I was using to drill through the granite countertop) in the plywood where I wanted the hole and used it to guide the diamond coated bit to cut through the countertop. This worked perfectly. I kept dipping the diamond coated bit in water every 30 seconds to clean it and keep it cool. It only took about 5 minutes or so and I was through. Perfect clean cut.
...
show more
Reviewed in the United States on January 20, 2024 by TheReviewer