Search  for anything...
Creality

Creality K1C 3D Printer, 600mm/s Fast Speed Clog-Free Extruder Auto Leveling 3D Printers with AI Camera for 300°C Printing, Switchable Silent Mode Reliable Carbon Fiber 3D Printing 220 * 220 * 250mm

    • Based on 47 reviews
Condition: New
Checking for product changes
$599.00 Why this price?
Save $34.99 was $633.99

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Friday, May 17
Order within 6 hours and 15 minutes
Available payment plans shown during checkout

Features

  • CoreXY, High Speed Printing: The K1C 3D printer inherits the lightweight and agile CoreXY system of K1. It has a maximum speed of 600mm/s and an acceleration of 20,000mm/s., and is vibration-proof. The dynamically balanced printhead fan cools the hot end and 3D prints without shaking.
  • Clog-free Extruder, Quick-swap Tri-metal Nozzle: Stable 3D printer extrusion system with all-metal unibody design for smoother material flow and 1000 hours of clog-free extrusion. The nozzle and thermal barrier in one unit blocks thermal creep and ensures easy replacement.
  • Equipped with AI Camera: AI camera can monitor in real time and time-lapse shooting. Proactively alerts you to errors in the printing process. when an individual print fails in batch printing, you can just exclude it from the batch.
  • Silent Mode, Air Purifier: switch to the silent mode where the noise is45dB, as quiet as turning a book. Meanwhile, the built-in active carbon filter purifies compounds and particles arising from molten filaments. You can be reassured to live and work day and night in the same place with K1C 3D printer.
  • Perfect for Carbon Fiber Printing: K1C FDM 3D printer supports CF,PLA, ASA, PETG, TPU and many other consumables. With a closed chamber and hardened steel nozzle tip, the K1C 3d printer can confidently handle carbon fiber filaments such as PLA-CF and PETG-CF, which are widely used for their mechanical strength and dimensional stability.
  • Auto Leveling, Easy to Use: Pre-assembled complete machine, ready to use right out of the box. Built-in start-up guide. Auto Calibration with one tap, just touch the screen and the leveling job is done.
  • CrealityOS, Superb Software: Creality OS is based on Kipper and is completely open source.Creality print slicers feature intelligent cooling, optimal retraction, ultra-thin tree supports and more. With Creality Cloud, you can get a vast number of free 3D models and enjoy cloud printing.

Brand: Creality


Material: Metal


Color: Black


Product Dimensions: 35"D x 35"W x 48"H


Item Weight: 27 Pounds


Product Dimensions: 35 x 35 x 48 inches


Item Weight: 27 pounds


Item model number: K1C


Date First Available: August 18, 2023


Manufacturer: Creality


Country of Origin: China


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, May 17

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • This printer is perfect for anyone starting out in 3d printing.
Review Image by Michael L Ivey Michael L Ivey
I had never used a 3d putting before. I took it out of the box and started printing like a pro. The software is super easy. It has wifi, so you can monitor and print from your phone. I have been printing non stop ever since I bought this. There are tons of free designs on the web and it comes with a free year subscription to Creality's cloud service. I've printed several accessories out of carbon fiber nylon and glass fiber. No clogs in hundreds of hours so far. You will not regret this one. ... show more
Reviewed in the United States on March 31, 2024 by Michael L Ivey Michael L Ivey
    • Stay away from the K1C - I used to really love this brand..
Review Image by Nate Nate
Review Image by Nate Nate
Review Image by Nate Nate
Review Image by Nate Nate
I’ve owned numerous Creality brand printers, and have never had an issue beyond something minor that might generally come with 3d printing or just something that I could fix myself being quite savvy in anything tech. However, this unit being the most expensive one I’ve bought from Creality is a real disappointment. After a few very nice, higher quality prints, I started smelling something different that I don’t normally smell from 3D printers. So I stopped my print and started investigating. What I found was what I later discovered was called the infamous BLOB. Getting just the blob, is a serious pain that I have yet to resolve and I hope nobody else has to deal with this. but even worse, when I took the cover off the print head to look into this blob, I noticed the small main board on the print head had a broken clip for one of the wire sets. So now essentially most if not all of the print head essentially needs to be replaced. BUT WAIT, there’s more 🙄 You can’t purchase a single part for these things except maybe a nozzle. Which I did buy but took almost two weeks to get. Then I try to contact Creality and not only do they take days for every email response, but they offered no help even though I’m still under warranty. I am absolutely disgusted by this company and as of now, I’m prepping to order a Bambu or Qidi printer. Just about anything has to be better than dealing with this company any longer. Especially after the amount of money I’ve spent on this printer and all the others over the years. I had high hopes initially for this thing but now I’m done. I’m sure this review won’t get their attention either but if nothing else, it helps all of you realize they are a terrible company if they aren’t willing to help the people that keep their lights on. ... show more
Reviewed in the United States on April 12, 2024 by Nate Nate
    • Great printer love it
Review Image by ruslan ruslan
Fast delivery, good package, The printer build is high quality, Very fast printing, very good quality print. But and it's a small but the printer is loud
Reviewed in the United States on April 15, 2024 by ruslan ruslan
    • Great printer
Review Image by Levi simmons Levi simmons
Review Image by Levi simmons Levi simmons
Review Image by Levi simmons Levi simmons
The media could not be loaded. It really is a plug and play printer, just remember to adjust the power switch on the side if you’re in the us. Auto leveling works very well and the remote viewing, pausing and status is really nice to have. I’m very pleased with how quiet it runs and how fast. I used the wireless print function and it worked flawlessly. I’m looking forward to really seeing what all this printer can do! ... show more
Reviewed in the United States on February 9, 2024 by Levi simmons Levi simmons
    • The K1C gives you hassle free prints.
After a little bit if set up time thing was ready to go (longer than 15min). If you are looking for a printer that just prints than this is the one. Some of the flaws that I have noticed are, 1. The filament doesn't always line up with the hot end (disconnect boden tube from chain). 2. You must use their slicer (added learning curve to seasoned operators). 3. Filament mount is on the back (they give you a print to move it to the side it helps). Overall, I spent a third of the time setup to print then an Ender 3 This is Crealtys Cadillac of printer it's got all the bells and whistles you are looking for and is a huge leap from an Ender 3 with mods. I am not disappointed with the quality of the machine or the parts it makes, buy a machine like this it's the NEW standard in printing. ... show more
Reviewed in the United States on May 4, 2024 by Kindle Customer
    • Seized nozzle. Power connectors for hot end glued together.
Pending customer support currently. The good: when it was working for the nearly 2 months I had it, it worked pretty dang good. The bad: ai detection camera feature is useless and has yet to stop a failed print. I've had both nozzle clogs and spaghetti that went quite some time without being detected. The really bad: Nozzle clogged due to filament breakage, no big deal, had it happen many times on other printers. However, went to remove the "quick swap" nozzle, and that's where the problems began. I had noticed slowly degrading print quality, turns out the hot end screws were loose, one fell out while removing the rubber heat shroud. Screws are very short, and have a hard time getting proper engagement, 4 threads at best. Using provided tools, tried to remove nozzle, but after a few very difficult turns, the nozzle was seized and could no longer turn in either direction. At this point, figured I should just take the whole hotend off, but as I gave the two power connections a wiggle, they broke free of the control board, to reveal that they had some sort of glue on them that I couldn't see. Maybe I got a lemon, maybe there's some bad choices in design here, or maybe I'm missing something somewhere, but as of right now, I'm out an expensive unit, due to what I can only call false advertising. ... show more
Reviewed in the United States on March 30, 2024 by Matt
    • Love it. 1st printer
The media could not be loaded. At first it didn't need glue stick then it did for the first 2 prints then it doesn't. I have printed a hand full of stuff.
Reviewed in the United States on April 1, 2024 by Lee

Can't find a product?

Find it on Amazon first, then paste the link below.