Search  for anything...
COSTWAY

COSTWAY 11500 BTU Mini Split Air Conditioner, 115V 17 SEER2 Wifi Enabled Inverter Air Conditioner & Heater Pump System Cools Up to 750 Sq. Ft, Compatible with Alexa, w/Installation Kit

  • Based on 1,613 reviews
Condition: New
Checking for the best price...
$489.99 Why this price?
Holiday Deal · 59% off was $1,199.99

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2026

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by costway
Arrives Dec 26 – Dec 30
Order within 9 hours and 55 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Size: 11500BTU,115V,17 SEER2


Features

  • Powerful Cooling & Heating: This 11500 BTU mini split air conditioner is designed to cool or heat large spaces up to 750 square feet. The advanced chassis heating prevents freezing and maintains the normal operation of the outdoor unit. It can cool even at 122F and heat even at 5F.
  • High Energy Efficiency: The inverter air conditioner improves energy efficiency by adjusting the compressor speed and avoiding frequent starts and stops. Plus, the use of R32 refrigerant makes this ac unit an energy-saving & green cooling solution for your home. It is also compliant with ETL and AHRI. GWP of air conditioning refrigerants is 675.
  • Smart Control from Anywhere: This mini split air conditioner and heater pump system is Wi-Fi enabled, allowing you to tailor your comfort via smartphone & voice. It is compatible with Alexa or Google Assistant. Additionally, a handy remote control with digital display is included for easy operation.
  • Versatile & User-friendly Design: With a wide temperature range and 7 operating modes, including auto/cool/ heat/dry/fan/sleep/ECO and 7 fan speeds, this mini split AC caters to all your comfort needs. Other features such as 4D auto swing, child lock, I Feel and Health offer added convenience for everyday use.
  • Low Noise & Easy Maintenance: The sleep mode with ultra quiet operation and screen off function provides a peaceful environment without disturbing your sleep. The 133F self-cleaning and washable filter make maintenance easier and air cleaner. As for installation of this AC unit, a licensed HVAC professional is required.

Description

Description: Experience ultimate temperature control in your space with this mini split AC. This 11500 BTU mini split air conditioner boasts 7 modes and 7 fan speeds, offering flexibility to keep areas up to 750 sq. ft. comfortably managed across various seasons. Featuring a 17 SEER2 rating and R32 refrigerant, this inverter AC unit aims to reduce energy costs and global warming potential. Thanks to the Wifi enabled design, you can effortlessly control your AC via the smartphone or voice commands through Alexa or Google Assistant. Besides, this mini split air conditioner and heater features a quiet sleep mode, 24-hour timer, 4D auto swing and handy remote control for convenient use. Please note that the installation requires a Licensed HVAC Installer. Features: GWP of air conditioning refrigerants is 675. Multifunctional design includes cooling, heating, drying and fan Powerful cooling & heating for rooms up to 750sq.ft Effortless control via your smartphone/voice/remote control 7 fan speeds: auto/low/low-mid/mid/mid- high/high/turbo Inverter technology ensures energy-efficient operation Removable & washable filter for hassle-free maintenance Humanized design such as child lock and self-cleaning R32 refrigerant boasts a lower environmental impact Chassis heating maintains long-lasting performance Set schedules easily with the 24H on/off timer 4D auto swing to prevent direct blowing Quiet sleep mode ensures a restful night Complies with ETL and AHRI Specifications: Color: White Material: Metal, Aluminum, Copper, AS Indoor Unit Dimensions: 30.5" x 9.8" x 8.2"/77.5 x 25 x 20.7 cm (L x W x H) Outdoor Unit Dimensions: 31.1" x 11.4" x 19.5"/79 x 29 x 49.5 cm (L x W x H) Diameter of Air Pipe: 3/8" (9.52 mm) Diameter of Liquid Pipe: 1/4" (6.35 mm) Diameter of Drain Pipe: 0.67"/16.9 mm Max Remote Control Distance: 39 ft/12 m Voltage: 115V~/60Hz Min. Circuit Ampacity: 18A Cooling Capacity: 11500 BTU Heating Capacity: 11500 BTU Cooling Power: 1180W Heating Power: 1005W Coverage Area: 750 Sq.Ft/70㎡ Air Flow Volume: 276 CFM/470 m³/h Dehumidifying Capacity: 66 Pints/Day (31.2 L/Day) Temperature Setting Range: 60℉~88℉/ 16℃~31℃ Refrigerant: R32 SEER2: 17 HSPF2: 9.5 Indoor Noise Level: 29 dB Outdoor Noise Level: 53 dB Net Weight of Indoor Unit: 20.5 lbs/9.5 kg Net Weight of Outdoor Unit: 54 lbs/24.5 kg Package Includes: 1 x Indoor Unit 1 x Outdoor Unit 1 x 13 ft Copper Connection Pipe - Air Pipe 1 x 13 ft Copper Connection Pipe - Liquid Pipe 1 x 5.8 m/19 ft Communication Wire 1 x 2 m/6.5 ft Drain Hose 1 x Remote Control 1 x Wall Bracket for Remote Control 1 x Wall Sleeve 1 x Wall Cap 1 x Drain Elbow 1 x Tape 1 x Putty 1 x User Guide

Brand: COSTWAY


Capacity: 1 Tons


Cooling Power: 11500 British Thermal Units


Special Feature: 4 Way Swing, Alexa and WiFi Enabled, Fast Cooling, Heating & Cooling Function, Sleep Mode


Product Dimensions: 9.8"D x 30.5"W x 8.2"H


Color: White


Voltage: 115 Volts (AC)


Noise Level: 29 Decibels


Refrigerant: R-32


Model Name: Mini split


Brand Name: ‎COSTWAY


Model Info: ‎FP10995US-WH+


Item Weight: ‎20 pounds


Product Dimensions: ‎9.8 x 30.5 x 8.2 inches


Item model number: ‎FP10995US-WH+


Capacity: ‎1 Tons


Noise: ‎29 Decibels


Installation Type: ‎Split System


Special Features: ‎4 Way Swing, Alexa and WiFi Enabled, Fast Cooling, Heating & Cooling Function, Sleep Mode


Color: ‎White


Voltage: ‎115 Volts (AC)


Wattage: ‎1180 watts


Material Type: ‎Metal, Aluminum, Copper, AS


Included Components: ‎1 x Indoor Unit, 1 x Outdoor Unit, 1 x 13 ft Copper Connection Pipe - Air Pipe, 1 x 13 ft Copper Connection Pipe - Liquid Pipe, 1 x 19 ft Communication Wire, 1 x 6.5 ft Drain Hose, 1 x Remote Control, 1 x Wall Bracket for Remote Control, 1 x Wall Sleeve, 1 x Wall Cap, 1 x Drain Elbow, 1 x Tape, 1 x Putty, 1 x User Guide


Floor Area: ‎750 Square Feet


Date First Available: May 29, 2025


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Dec 26 – Dec 30

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Impressive performance and reasonably priced; very quiet and efficient
Size: 12000BTU, 115V, 20 SEER2
After I finished installing and running it, I must say that I'm very satisfied with the purchase and the quality and results achieved from this item. Using only 120 volts the system runs nearly silently, while the amount of air discharged by the vent is very significant. It took watching a few different videos to fully comprehend the task at hand, but I took my time and went step by step, making one significant exception that I thought could be helpful in colder months, so I routed the condensate drain line on the inside of our garage, and at the bottom I coupled it with some CPVC parts and ran it through the exterior wall so the drain is outside. I did this because in my experience, drain lines can freeze up solid in very cold temps, and shut down a system.....it's happened to me more than once. This way the drain is only really exposed just a few inches outside the fully insulated exterior wall, and should be able to resist freezing.......we'll see how that works out. I used a solid stainless steel support bracket which was tricky to install, since the side to side dimension is inflexible and related to the width between the legs of the outside unit with a very small margin of error allowed. It worked out fine and I was able to give it 10 inches of air space in the back to the wall, enough for proper efficiency of the unit, and also to provide a hidden "alcove" for the coil of lineset that I left intact as it came from the factory. It looks fine, especially since I ordered a "cover kit" for the exterior line set for a neater appearance. I also ordered a sleeve through the wall which I cut to length and caulked in place prior to passing the line set and communication wire through. (As I mentioned, I did not include the drain hose in that bundle) The most apprehensive part was the installation of a new 20 amp circuit at the panel box, which was quite easy after I digested the videos online that clearly depict a safe method of doing that. Using 12-2 copper wire, I fed the circuit partly through the wall, then out and down the inner wall surface before exiting outside to a non-fused quick-connect box that I picked up at Home Depot. The final challenge was to acquire a vacuum pump and manifold gauge set for just over $100.00 to fully evacuate the low pressure side to vent any moisture or unwanted gases, prior to firing up the system. It allowed for a one hour leak-check after shutting the valve at the manifold and turning off the pump after it was given 25 minutes to do it's thing. I feel that I learned quite a bit about some tools and techniques that I was unfamiliar with, but was willing to digest and understand through careful selection of "how-to" videos readily available online. Installed yesterday, it runs great and I love the way it silently moves the air flow up and down as well as from side to side with motorized vanes in the blower compartment. Finally, I can work in my fully insulated garage in comfort year round. I hope the heating is adequate, but in the last year, I found a single small space heater was sufficient to raise the temperature in my garage by enough degrees to make it warm enough to work in comfortably, so if the Split unit isn't very good at heating, as I suspect it will be, I can easily supplement the warming by a simple space heater to easily make it comfortable in winter. I would add that build quality was very good, and was surprised by the amount of pressure released from the smaller high pressure copper line tube when I readied it for connecting with the longer line set to take the line down the exterior to the condenser unit. That indicated that the interior unit's plumbing was air tight from manufacture to my installation, which shows the build quality of that piece. Similarly, the charged condenser was also airtight and with simply using hand wrenching without torque-indicator tools, the system proved easy to connect and insure proper leak free system. I would say that the only possible addition to the system that I would recommend would be to have a simple "on-board" control pad at the inside unit as a failsafe if the remote failed to work properly. But the remote works perfectly so far, so maybe that would just be a waste of resources and just raise the price. For clarity, my unit offered 12,000 BTU's and runs on a 120 Volt 20 Amp circuit. I spent about 595.00 on the Split A/C unit (incl. shipping), and 36.00 on the triangular stainless support bracket, 33.00 on the line cover kit, 23.00 on the thru wall sleeve kit, 10.00 on a 2.5" hole saw, 54.00 for the manifold gauge set, 55.00 on the vacuum pump, for a total of 806.00 (not incl sales tax)......I wasn't thrilled that shipping for the Costway unit was 99.00, but I guess it's a fairly large and somewhat heavy item to ship. (came in two pieces over 2 days apart) So, that's the story, and I'm 'stickin' to it', as they say. ... show more
Reviewed in the United States on August 10, 2025 by Paul R DesRoches
    • The customer service is top notch.
Size: 18000BTU, 208-230V, 19 SEER2
Review Image by Serge Storms Serge Storms
Review Image by Serge Storms Serge Storms
I bought the 18,000 BTU (220V) mini split for my shop. The shop is 1,000 square feet, has insulated walls, but no drywall or insulation on the ceiling. It is open to the attic, so I don’t have the most efficient insulation in the shop. That being said, this unit works very well and keeps my shop comfortable on even the hottest days. It routinely gets into the high 90’s where I live and this little unit seems to be up to the task of cooling my shop. It is so quiet that I can’t hear it running from the other side of the shop. It’s quiet, but it also puts out a lot of air flow. The build quality is better than expected and so is the performance. I was able to DIY this project having very little experience with home HVAC systems. First was the electrical. I located the units as close as I could to the breaker panel in my shop so I didn’t have to run a lot of wires. I used 14/3 romex and installed a disconnect box outside that feeds power to the outside unit. Here is the disconnect box I used. It was about $25- https://www.amazon.com/dp/B000H5YAD6?ref=ppx_yo2ov_dt_b_fed_asin_title Mounting the inside unit is easy with the included cardboard template for marking the holes/drilling. The bracket for hanging the inside unit is included, but you do not get a bracket for the outside unit so if you want to hang it on a wall you will need to buy a bracket or make one yourself. I used this bracket that cost about $35- https://www.amazon.com/dp/B07B77C8T6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 You will need a holesaw to make a pass-through in the wall for the refrigerant and between unit electrical wires, as well as the drain. I did my drain separately for a number of reasons that aren’t important here. Once both units are mounted you have to run the wiring and the refrigerant pipes between the two units. Be careful when bending the larger copper refrigerant line because it will kink fairly easily when you are not being careful. I ended up removing the insulation and using a bender that would normally be used for bending steel electrical conduit. I already had that and you might not need it if you are patient and work slow. Bends in the larger copper tubing need about at least 6’-7” radius to avoid kinking. Once you are happy with the large line, the smaller line will easily conform to the same shape because it is less prone to kinking on bends of the same radius. Probably the most intimidating aspect of the install was the need to evacuate the air from the system after completing all of the plumbing. I thought I could rent a vacuum pump and gauge set from Autozone, but I wasn’t able to make that work because the fittings are incorrect. Not finding anything that would work for rent locally, I just bought a vacuum pump and gauges from Amazon for about $120 - https://www.amazon.com/dp/B079JJSFQW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 With the correct vacuum pump and gauges, I was able to easily apply a vacuum for 15 minutes until it was completely evacuated. Then I buttoned everything up, flipped on the breaker and hit the power button on the included remote control. The unit hummed to life and started blowing cold air in seconds. I did have a small issue with one of the plastic components that was included in the system. I called the support telephone number on a Sunday afternoon and was able to speak to someone right away. Even being hard of hearing, I had no trouble understanding the nice lady with a faint accent. She asked for my order number and told me they would be in touch within 24 hours. Later that day I got an email from them asking me for a photo of the problem. I sent the picture and then the next day they emailed me again saying that the part is on the way to my address and it should be there in 12-15 days. The part actually arrived in 6 days and everything is fixed and operating smoothly. I don’t give out 5 star reviews unless I feel the company really deserves 5 stars. In this case, the customer service after the sale was so good, they earned more than 5 stars. Great company, and they stand behind their products. ... show more
Reviewed in the United States on August 11, 2025 by Serge Storms Serge Storms
    • Affordable HEATING AND COOLING!
Size: 12000BTU, 208-230V, 21 SEER2
Review Image by D.&A. S. D.&A. S.
Review Image by D.&A. S. D.&A. S.
We’ve had these in for about two months. We chose mini splits because the house we bought had outdated baseboard heating and no central AC. Our house is 1200 sq feet and we purchased two of these. (One for the end of the hallway and one for the main living area. They are AWESOME. SO affordable for us as first time homebuyers. The installation wasn’t hard once you get the hang of it. My husband did these with some help. You do have to know your way around wiring and using a hvac vacuum. We are in the North and it’s gotten into the 20’s so far and they’ve done great. The remote doesn’t do much beyond change the temperature it seems. However I should mess with it some more. I’ve barely seen a difference in my electric bill!!!! Which is amazing. Since we have one at the end of the hallway to keep all the rooms warm/cold, I do tend to run a box fan just to keep the air flowing better down the hall. You can’t hear the indoor unit running. We are really happy to have found these. These DO come with “whips” to connect to the disconnect box outside and they do seem decent quality. We already had our own so used those. The drain hose seems flimsy so you may want to use your own pvc pipe. Thanks for reading! ... show more
Reviewed in the United States on December 1, 2025 by D.&A. S. D.&A. S.
    • 1 year still going strong
Size: 12000BTU, 115V, 20 SEER2
Ok it has been just a little over 1 year and I can say that this product is amazing. Easy to install I did the install myself and no leaks, the heat and ac work perfectly, and i didnt see a huge change in my electric bill. The filters are easy to clean and the hoses are simple to vaccum yourself. Its super quiet and im impressed with it. Highly recommend. ... show more
Reviewed in the United States on December 6, 2025 by Kindle Customer

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...