CORSAIR Hydro Series H115i AIO Liquid CPU Cooler, 280mm Radiator, Dual 140mm SP Series PWM Fans, Advanced RGB Lighting and Fan Software Control
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$38.33
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
12 left in stock
Arrives
Jun 16 – Jun 20
Recently Viewed
Style: H115i RGB
Features
- AM4 bracket not included. Please visit the Ryzen page on the Corsair website to order a free AM4 retention bracket.
Description
a 280mm Radiator And Dual Sp140l Pwm Fans Provide The Extreme Cooling You Need For Highly Overclocked Cpusthe Hydro Series H115i Is An Extreme Performance, Factory Sealed, All-in-one Liquid Cpu Cooler For Cases With 280mm Radiator Mounts. The 280mm Radiator And Dual Sp140l Pwm Fans Provide The Excellent Cooling You Need For Highly Overclocked Cpus. Corsair Link Software Control Is Built In, So You Can Monitor Temperatures, Adjust Cooling Performance And Customize Led Lighting Directly From Your Desktop. 280mm Dual-fan Radiator The Key To Fast, Efficient Cooling Is Maximizing Cooling Surface Area. If Your Pc Case Has Dual 140mm Fan Mounts Spaced For A 280mm Radiator, The H115i Lets You Take Advantage Of Your Case's Full Cooling Potential.improved Coldplate And Pump Design Everything's Been Tweaked To Make The V2 Line Our Best Yet. The New Design Operates More Efficiency For Both Lower Temperatures And Less Noise.dual Sp140l Pwm Fans The Included 140mm Fans Are Custom-designed For High Static Pressure Air Delivery With Minimum Turbulence And Noise. They're Pwm Controlled, So You Can Customize The Fan Speed To Find The Optimal Balance Of Cooling And Noise.built-in Corsair Link For Monitoring, Customization And Control Attach The Included Corsair Link Cable To A Usb Header On Your Motherboard And Download The Free Corsair Link Software To Unlock Even More Power. You Can Customize Cooling Performance, Monitor Coolant And Cpu Temperatures, And Change The Color Of The Rgb Led Lighting From The Default White To Match Your System, Or To Change Color Based On Temperature Readings And Other Inputs.high Performance Cpu Cooling Made Simple Gone Are The Days When Watercooling Required Lots Of Work. The H115i Is A Closed Loop, Factory Sealed Design That Comes Pre-filled, And It Comes With A Modular, Tool-free Mounting Bracket For Faster Installation.about Hydro Series Liquid Cpu Coolers Corsair Hydro Series Cpu Coolers Give You The Power Of Liquid Cooling In A Compact, Easy-to-
Product Dimensions: 12.28"L x 1.06"W x 5.51"H
Brand: Corsair
Voltage: 12 Volts
Wattage: 260 watts
Cooling Method: Water
Compatible Devices: Desktop
Noise Level: 40 dB
Material: Copper
Maximum Rotational Speed: 2000 RPM
Product Dimensions: 12.28"L x 1.06"W x 5.51"H
Brand: Corsair
Voltage: 12 Volts
Wattage: 260 watts
Cooling Method: Water
Compatible Devices: Desktop
Noise Level: 40 dB
Material: Copper
Maximum Rotational Speed: 2000 RPM
Wireless Type: 802.11a
Number of USB 2.0 Ports: 1
Item model number: CW-9060027-WW
Item Weight: 4.41 pounds
Item Dimensions LxWxH: 12.28 x 1.06 x 5.51 inches
Color: Black
Manufacturer: Corsair
Is Discontinued By Manufacturer: No
Date First Available: January 4, 2016
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Jun 16 – Jun 20
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: H110i RGB
I was in the market for an AIO because I recently purchased a known to run hot FX-9590 and I wanted something better than a heat sink tower to cool it down. After weighing the choices between a handful AIO's I chose the H110i mostly because Corsair is the most widely used AIO, and the H110i has the second longest warranty at (5) years. Installation is actually easier than a big air cooler because you don't have install a custom back plate on your motherboard - unfortunately for me I had take an aftermarket back plate off and install the original back plate to use the H110i. Then find a place to hang the radiator which fit perfectly in the top of the Stryker case by just removing the 200mm top exhaust fan. Note: The Screws provided with the H110i are round heads which interfere with the top screen movement (for cleaning) on a Stryker/Trooper case , but I'm using it as exhaust, otherwise I'd have to find replacement flat head screws. There are 3 ribbon cables coming out of the water block pump head, one SATA power to energize the pump and fans, the next two flat ribbons are for the two 140mm PMW 2100rpm Corsair SP fans. Note: These fans are 5-700 rpm faster than any of the 140mm fans Corsair distributes to retailers, but they are for sale at Corsair's site as H110GT replacement fans - the only 2100rpm 140mm Corsair sells at this time. A fourth cable with a single wire plugs into the 3-4 pin CPU fan header for the pump rpm signal. There's a fifth unattached cable that plugs into a USB receptacle in the pump head and the other end to one of your motherboard's USB headers for using the LINK software. It is not attached permanently like the other cables I assume because the Link software is optional since the H110i will work without it, but if you want a fan configuration other than the default you need to connect it and use the Corsair Link at least until your configuration is complete. Optionally of course you can connect your fans to a fan controller or control using available motherboard headers. The first thing I noticed when I powered the unit on the first time was a revving up and down of the fans every few seconds which became annoying since the fan rpm's kept going up and down like a kid twisting then dropping throttle on his new 2 stroke motor bike outside your window. So, without panic I decided to familiarize myself with the Corsair Link Software to see if I could fix this revving up and down problem. I found that the Profile my H110i was configured in out of the box was based upon CPU Package Temperatures. If you were to put the CPU package on a graph it almost looks like a EKG graph (heart monitor) with an AMD FX CPU such as the 9590 because it can vary widely ( amplitudes and intervals) since the package data cycles through the 8 cores every few tics of the clock and some core temps can differ by 10 degrees or more which if the difference temps between cores are on two different sides of the fan curve that means the firmware is constantly telling the fans to speed up and then slow down with every other tic of the clock. To resolve the revving issue I immediately set my fans to spin at a fixed RPM temporarily and it worked. Then I setup profiles of each speed and tested the speeds at different cpu loads to see how each speed effected the cooling and how much noise they made while doing so in preparation to mapping a fan curve configuration for my needs. I've had it a month and I'm still tweaking it a bit. I will say that these high rpm fans definitely make this AIO better in performance as at high loads the higher speeds make a difference. With all cores at high load my 9590 stays in the 50's if I allow the fans to ramp up to 1400-2100rpm as needed - otherwise If they are run quiet which is <1300rpm my temps will climb past sixty which I wouldn't want. The caveat is these fans when climbing up to speed are noisy and tend to rattle until they settle down. I would not change them to common SP <1500 fans with a hot cpu like the 9590, but I think I see some Noctua SSO2 Bearing Fan Retail Cooling NF-A14 iPPC-3000 PWM fans in my future. It took some time to find a fan speed to keep my 9590 idle temperatures stable - BTW I have the 9590 locked at 4.91 GHz, slightly below its 5GHz Turbo rate. I found that a moderately quiet fan rpm setting of about 1000 rpm's keeps my 9590 CPU in the mid to upper 30's depending on ambient start up air temperatures and the H110's coolant temperature (2 hours into its startup today it's sitting at 35C while both surfing and editing this review). After a full load of an hour or more then back to light use the CPU idle temperature tends to settle at about 39-40C since the coolant temps are higher. I expect the temps will go up a bit during the summer heat, but for now I'm more than satisfied with the temperatures while using the H110i. I also tested the H110i with my FX-6300 and it idles at much cooler temperatures that ranged about 26-27 and stayed the 40's when at full load with an occasional rare bump to 50-51C. As much as I've read complaints about the Link Software, I can tell you that it isn't perfect especially if you're looking for an all in one monitoring solution , but it's certainly effective and once you set your Profile (named configuration) it is locked into the 110i's firmware - so you can unplug the USB and never start the Link software again once you're satisfied with your configuration. While the Link is stable, there are issues such as 2 of my 5 motherboard fan headers ghosting, and their fan speeds not being reported, which otherwise would of been a nice feature, but that is really not why I bought the H110i for a cooling solution. Setting up Profiles - there are two (2) pump speeds and either speed can be attached to any of your named Profiles. The pump speed can be set to adjust at a specified temperature, but I made it simple and left them on high for all configurations since there is no discernible noise at either speed. There are 8 modes Default, Quiet, Balanced, Performance, custom, fixed %, fixed rpm and Max. In each Profile the modes can be set to each individual fan lead (2), you can copy them over to the other for identical settings or you can alter them if that fits your needs. For example if you had a push pull setup, you could put the top pull fans on one channel and the bottom two on another in case you needed to make the pull side slightly faster to make them more efficient. There are 5 speed/temperature mapping points on the graph you can base fan curve upon attached to one of the following (7) groups. MB Socket, MB Motherboard, MB Temp#3, CPU Package, HD/SDD Temp, GPU Temp & H10i coolant temp. I created and named at least a dozen custom configurations with the link software some at fixed speeds for specific tasks and some custom curves for most everyday use. Lastly each device being monitored has a Notification tab available by clicking the item that allows an optional action to be performed should a monitored temperature or fan speed fall outside the range specified. Those actions can be shutting the system down at a specified time interval, energizing RGB features, running an executable file, or ramping up fans 100%. Did I mention the Corsair logo is and illuminated RGB LED and can be configured in the Link? Well I did now and yeah that's nice and might compel one to consider H110i over an identical AIO that has no LED. Even though there's room for improvement with the vibrations of the fans while ramping up >1300 rpm and the lack of a complete monitoring solution (ghosting of other system components) with the link software, the bottom line after a month into using the H110i I'd say it was a good choice and I'd recommend it to anyone looking for a inexpensive, simple, yet effective liquid cooling solution.
...
show more
Reviewed in the United States on June 12, 2017 by Jeff
Style: H115i RGB
TL;DR - Buy it. Corsair has a bomb warranty that not only warrants the product, but offers to replace the parts onto which it would leak for five years. The Corsair Link will give your data-loving internal nerd peace of mind. It's quiet (for what it is) and keeps the CPU impressively cool, even when gaming at true 4K ultra and with an Oculus Rift. GO ON, I HAVE A MINUTE I'm one that's ascribed to the theory that water-cooling both scares the heck out of me and is pretty awesome. This cooler's made for people like me. I did a lot of research prior and was sold on its closed-loop design. Since it's a sealed system there's little I can break or jack up. Secondly, Corsair sold me on its warranty -- if this thing leaks on your components they'll replace said components "on a case-by-case basis". I could be wrong and hope to never test the "case-by-case" language, but my guess is that if you're using it as designed, they've got you covered. I thought the price was quite reasonable as well. I'd even argue budget rigs should run this cooler. All of this is on the following build: - Intel i7 6700k (4.0GHz, not OCed at the moment) - 2 x Radeon R9 390s @ 8 GB ea - 2 x 8 GB Corsair Dominator DDR4 3000 RAM - Full ATX Tower (Rosewill Nighthawk) - Asus Z170A Motherboard - Generally gaming at either true 4k (4096x2160) or on an ultrawide (3440x1440) at ultra everything. This also runs an Oculus Rift at "best" (or equivalent) settings, depending on the game. Room temp is generally between 70-75 deg F depending on the day, time, season, weather, etc. PERFORMANCE To run the rig at full-tilt, I do keep the cooler at its "performance" setting using the predefined Corsair Link system (which I'll get to later). At idle, this cooler does such a fantastic job that the CPU temp is laughable -- it's generally never breaking a sweat and stays at room temp (20-22 deg C). When fully under load and after heavy gaming (5-6+ straight hours), it's even more impressive. I like to watch high temps -- as those are the ones that kill -- and the CPU still comes in around 67-68 deg C with a water temp of about 38 deg C. I think the hottest I've ever seen it is 72 deg C, and that was with the GPUs registering 82 deg C and the system set to "balanced". The amount of heat transfer and dissipation that happens between "balanced" and "performance" is incredible. As for noise, it's surprisingly quiet given the size and ridiculousness of this setup. It does have a bit of a sporadic fan when doing non-gaming activities, seemingly increasing fan and pump speed at the threat of thinking. It's noticeable, but more so when you're doing non-gaming stuff that isn't placing a persistent load on the system. With headphones on, I can't hear it. CORSAIR LINK I am so in love with this, that I wanted to give it its own sub-section. I've always been a fan of Corsair products but this is extremely delicious icing on the cake. The Link is a small UI you download that gives you insight into all kinds of fantastic nerd fun and data for your system. From this, you can get the aforementioned high temps of components, look at graphs of pump speed, fan speed, etc and even adjust them. Most awesomely, this gives you some control over how to handle overtemp alarms. While my particular system isn't overclocked yet, it likely will be one day, and that's where things can go haywire. The Corsair Link system lets you set min/max alarms and actions. For instance, you can set a max value of 85 deg C. When CPU temps reach it, it can turn its LEDs red and turn all fans to 100%. Then you can even tell it to shut itself down or run files to throttle. This user-tunable self-preservation is downright incredible. My only minor grievance here is that components using the Link system use one of the motherboards USB headers. Had I known this before, I likely would have picked one that has a few extras but I didn't. I'm now warning you all. With the Hydro and the PSU both having this feature, I'm out of USB 2.0 headers and lost the front plugs on my CPU case. It's not earth-shattering but if you're buying a new mobo as well, something to account for. OTHER THINGS I'VE LEARNED Corsair had a bizarre way of stating their recommended fan position so I decided to place it so it was sucking external air through the radiator and into the case. I'm still not sure if this is what they meant, but it seems to be doing a fantastic job. The massive dual fans seem to create overpressure that the exhaust fan quickly takes advantage of. It's been really helpful in GPU cooling. They both feature their own fans and heat pipes, but they're stacked making them choke a bit for air. Purely as an experiment, I gamed with the case open and closed. The GPUs run about 6 deg C cooler with the case closed. The fans have a little arrow to identify airflow direction as well. This radiator is thick and massive. That makes it perform extraordinarily well, just be sure the case can support it. This is more aimed at non-full-tower cases since full towers are ridiculously huge and can fit just about anything you can think of.
...
show more
Reviewed in the United States on May 16, 2016 by Jeff Kimble