3D Printer Enclosure with Ventilation Kit, LED Light,Thermo-Hygrometer, Premium Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo
Condition: New
Buy Now, Pay Later
As low as
$11.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 10 left in stock, order soon!
Arrives
Nov 1 – Nov 2
Recently Viewed
Size: 3-Medium with Ventilation Kit
Features
- Enhanced Illumination For Your Printing AreaImprove your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
- Temperature and Humidity Monitoring,Isolate NoiseOur enclosure is equipped with an advanced monitoring system that provides real-time temperature and humidity readings. This helps you optimize printing conditions and achieve higher quality prints. An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process,
- Improve Print Quality with Constant TemperatureProvides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to UseProtect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Wide CompatibilitySupport printer size (include spool holder height) is smaller than 29.525.621.6". Please measure your printer height before ordering. Compatible with Creality Ender 3 V3 SE/KE/ Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender5/5Pro/5S1,Neptune 4/Neptune 3pro 4pro,AnkerMake M5/M5C, Anycubic 2 Neo/Kobra 2 Pro/Kobra 3 3D Printer.
Brand: YOOPAI
Material: premium flame fireproof fabric+metal+plastic
Color: Black
Product Dimensions: 25.6"D x 21.6"W x 29.5"H
Item Weight: 5.7 Pounds
Product Dimensions: 25.6 x 21.6 x 29.5 inches
Item Weight: 5.71 pounds
Item model number: Premium Enclosure
Batteries: 1 LR44 batteries required. (included)
Date First Available: October 8, 2023
Manufacturer: YOOPAI
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Nov 1 – Nov 2
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 3-Medium with Ventilation Kit
Easy to assemble and disassemble. The lighting and ventilation work fine. I procured an airduct extension and printed my own duct adapter hardware, and it all works great. I use it for an FDM printer, which is overkill, but I would trust it for a resin printer. I would absolutely never use a resin printer without such an enclosure. Probably never within the living part of my home. This enclosure, though, I trust.
...
show more
Reviewed in the United States on September 4, 2025 by Patrick Perdu
Size: 1-Medium with LED
I needed to reliably print a few parts for a Voron 2.4 build, which requires ABS. I have an old Prusa I3 clone in the garage which I've occasionally used for this since there are usually no drafts, and I stink up the garage instead of the house. During the hot summer months, when the garage is often pushing 90F, I'm normally able to get away with printing ABS well with an open frame. Come fall and winter, warping becomes an issue. Plus, the family was getting tired of the "Don't open the garage door!" exclamations from me when I was printing ABS. Picked this up to provide a quick enclosure, with hopes it would allow reliable ABS printing (and allow the garage door to be opened while doing so). This has worked SHOCKINGLY well. Since my printer has been in this enclosure, I've been able to print about 10 parts, a few of which are highly prone to warping (small contact space on the bed). All of them have printed successfully and beautifully. Of course, the blast of "ABS stink" when you unzip it to remove the print is fun. "Just the facts, ma'am": Pros: - Super easy to assemble, although it's bigger than you think so have some space. - Canvas with the shiny fireproof lining is thick and well sewed. It didn't feel "cheap" at all. There is quality here. - I find the LED to be plenty of illumination, especially since it reflects off the shiny material inside. My print camera finds it to be plenty of light, too. - A good number of round bungs to route cables through, that seem to be in the right place. Two on the back and one on the right-hand side towards the rear. - Has a rather large flap on the left, which I'm not using. Closes with velcro. - I like that measurements were listed clearly, so I could ensure it would fit and get the correct size. Medium worked for my Prusa I3 clone (about the size of an Ender 3, I guess) with room to spare. - I can print ABS consistently, and get strong, clean prints! Cons: - Bungs are a little on the tight side. Had to really push the power cable through and thought I was going to tear the fabric. I did not, which is also a pro I guess, that canvas is pretty tough! - The clear viewing window has a lot of folds in it, so it can be a little difficult to see print details. Overall, I think this is a fantastic value if you're looking for an inexpensive and plug-and-play enclosure for your 3D printer.
...
show more
Reviewed in the United States on November 30, 2024 by Mark M.
Size: 3-Medium with Ventilation Kit
This review is for the Medium size kit with the exhaust fan and tube. The outer dimensions are great for a Bambu P1S. The AMS fits with a few inches to spare on the top, and there’s plenty of room around the sides. It’s easy to open the AMS also, since the zipper top opens all the way up the front and over the top. The quality seems really good actually - sturdy and well built, and all of the required parts were in the box. Only one small hiccup is that the front zipper door is curved on the bottom, and the front door hits the curve. See the photos. I had to build a little 2” tall platform to put it on. With that, everything fits great! Still room at the top to fit the AMS. The fan, light, and tubing work great too. I’d recommend.
...
show more
Reviewed in the United States on June 11, 2025 by Mason Mason
Size: 1-Medium with LED
Great product and easy to set up. Comes with small light and claims to be fire proof/resistant. Having the enclosure helped my print quality and bed adhesion. I ended up sending it back just cause it was alittle bigger than I had room for but other than size I would recommend this enclosure
Reviewed in the United States on July 25, 2025 by randy parks
Size: 2-Large with LED
This was my first printer i've ever bought, and we wanted to have an enclosure due to dust and animals. The enclosure is massive, but not massive enough to put a elegoo Neptune max in. It fits perfectly for my elegoo Neptune plus in though. So maybe if you have a printer underneath any max brand it will work perfectly. It does hide the noise and it does keep cold air out. At first it was a pain to build, but after a while you get it. I got it when I was on sale so I got 2 of them. I would definitely recommend this, especially if you're just starting out printing. The quality is pretty good.It just reminds me of a tent. And it has side pockets and slots, if you have AMS or combo.
...
show more
Reviewed in the United States on April 13, 2025 by AGR Productions AGR Productions
Size: 1-Medium with LED
While very inexpensive this was easy to assemble and appears sturdy. I was able to squeeze my Anycubic Vyper inside and moved the filament reel to the top plus printed a couple companion parts to reduce the angles of the entry. My ABS printing went from curling up from the plate to just not curling! Apparently even temperature control throughout the print is a big deal!
...
show more
Reviewed in the United States on August 26, 2025 by Susan Hinrichs
Size: 3-Medium with Ventilation Kit
I purchased this 3D printer enclosure to create a safer, more controlled environment for my workspace. After using it for a while, here are my thoughts: Build Quality and Design: The enclosure is constructed well enough. The frame is flimsy plastic. But I figure if I ever damage a part, I should be able to repair it easily. The transparent panel with the zipper is fine. With the fan running, I can leave the front open sometimes and not smell much of the resin. The included ventilation system works effectively to extract odors. But you have to figure out your own attachment for the other end of the hose. I 3d printed a part for it to blow straight out a window. The fan is not quiet but it doesn't bother me. The light is nice. I don't need a "Thermo-Hygrometer" but the temp display is useful. It is large enough to accommodate most 3D printers, I have two in this one.
...
show more
Reviewed in the United States on December 26, 2024 by Jason keeslar Jason keeslar
Size: 2-Large with LED
There's enough side to side and front to back clearance for base plate movement. It's taller than necessary but other than getting a custom made tent I don't see how you'd get around that. There's enough internal space that I can fit the Ebox filament drier inside while printing. The tent poles are fiberglass so they should stand up well over time. All in all, it seems like a really nice piece of kit for not too much money. I print in my basement and the tent seems to have cleared up my print base warpings by having a warmer draft free environment.
...
show more
Reviewed in the United States on May 31, 2025 by Michael DiTullio