2 Stroke 18HP Outboard Motor Boat Engine, Powerful 246CC 4500-5500RPM Short Shaft Fishing Boat Motor w/Water Cooling CDI for Inflatable Fishing Boats Water Sport Tools

Features

• Strong Power & Excellent Load-bearing Capacity 2-stroke 18hp engine (4500 to 5500rpm) provides strong power for you to drive fast and save a lot of time and energy. With solid aluminum alloy material and a powerful engine, the outboard engine has a maximum load of 2204 pounds to meet different needs. (The heavier the load, the slower the speed).
• Excellent Endurance & Excellent Heat Dissipation Low fuel consumption, efficient two-stroke motor, and large capacity fuel tank (6.34 gallons) provide you with a long endurance to meet the needs of short/long distance travel. Many cooling holes and water cooling systems provide excellent heat dissipation to prevent the engine from burning out after a long time of use.
• Flexible Steering & Easy Speed Regulation Forward, neutral and reverse gears, and a 360-degree steering function allow you to flexibly control the direction of the ship. Stepless speed change and constant speed cruise function make it easy for you to adjust the running speed and stable navigation at a constant speed to bring you a more comfortable user experience.
• Easy to Operate The manual start function allows you to operate easily by pulling the start rope and opening the speed switch on the handle. Its long non-slip handle(20 inches in length) is easy to grasp. The red stop button allows you to stop the engine by pressing it for a few seconds.
• Range of ApplicationThis outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc.

Description

Gear Oil Filling MethodThere is a screw on the gearbox, unscrew the screw to add gear oil. Each machine will be filled with gear oil before leaving the factory, so it does not need to be refilled when it is used for the first time. After that, add according to personal use, and check every ten hours.SpecificationMaterial: Aluminum AlloyColor: BlackModel: 18HP Horsepower Long AxisDisplacement: 246CCGear Ratio: 2.08 (27:13)Number of Cylinders: 2Speed: 4500-5500RPMGear: F-N-RRefueling Method: 92 Unleaded Gasoline is RecommendedOil Tank Capacity: 24L/6.34galLoad-bearing Capacity: 500-1000kg/1102-2204lbsIgnition System: CDICooling System: Water CoolingControl System: Tiller ControlStart System: Manual StartPropeller Specification: 23.5cm/9.25in (Length) 20.3cm/8in (Diameter)Suitable Stern Plate Height: 45cm-55cm/17.721.7inCylinder Diameter Stroke: 56mm/2.2in50mm/2inRecommended Engine Oil: 2 Stroke Engine OilMixing Ratio: Fuel: Oil = 50:1Trim and Tilt System: Manual TiltNet Weight: 28kg/61.7lbsGross Weight: 30kg/66.1lbsPackage Size: 1337138.5cm/52.42815.2inProduct Size: 87.333.2117cm(34.413.146.06inch)Package Included1x Outboard Motor1x Flameout Rope1x Oil Pipe1x Sealing Ring1x Paper Pad1x Spark Plug1x Start Rope1x Water Pump Impeller1x Cotter Pin1x Fuel Tank1x English ManualOther ToolsNotes1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.3. After the running-in period, the volume ratio of gasoline and oil is 50:1.

Brand: CapBoator

Color: 2 Stroke 18HP

Material: Aluminum, Plastic

Engine Displacement: 246 Cubic Centimeters

Engine Type: 2 Stroke

Brand: ‎CapBoator

Color: ‎2 Stroke 18HP

Material: ‎Aluminum, Plastic

Engine Displacement: ‎246 Cubic Centimeters

Engine Type: ‎2 Stroke

Operation Mode: ‎Manual

Recommended Uses For Product: ‎For Inflatable Boats, For Fishing Boats

Mounting Type: ‎Engine Mount

Fuel Type: ‎Gasoline

Maximum Horsepower: ‎2 Horsepower

Fuel Capacity: ‎24 Liters

Product Dimensions: ‎13.07"D x 34.37"W x 46.06"H

Manufacturer: ‎CapBoator

UPC: ‎758439377889

Model: ‎2 Stroke 18HP Outboard Motor Boat Engine

Item model number: ‎OT-BD-18

Exterior: ‎Machined

Manufacturer Part Number: ‎YDFK7V9DWDML8-CAP

Date First Available: December 6, 2023