12' x 14' Hardtop Gazebo Outdoor Aluminum Gazebo with Galvanized Steel Gable Canopy for Patio Decks Backyard by domi outdoor living (Wood Looking)…
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Jun 8 – Jun 12
Recently Viewed
Color: wood-looking
Size: 12'×14' gable roof
Features
- Stable Aluminum Stand:4.7x4.7" aluminum stand pole with pre-drilled base,much bigger than standard models,which make it easier to secure to cement floors for added stability.Triangular Structure of the roof and reinforced metal sheet make it strong enough withstand wind and rain, and oftentimes, even snow.
- Steel Hardtop Canopy:Fade-resistant and rust-resistant galvanized steel metal top not only block UV rays,offers a cool shade in hot summer,but also provide stability in windy.Whether it be rain or the hot sun that is throwing a wrench into your enjoyment,you can keep your backyard fun going with hardtop gazebo 12 by 14.
- Slope Roof DesignThis 12x 14 gazebo hardtop futures in reasonable roof slope design which allows water to flow out fast to prevent rainwater from massing.3 ceiling hooks are provided for suspending lighting and fans.
- WOOD-LOOKING FRAMEDomi outdoor gazebo adopt new thermal transfer printing,make the aluminium surface look like natural ambience.This gazebo for patios will bring a sense of nature to your outdoor space.
- Wide Use:This gazebo 12x14 is certain to make a lasting impression on your guests and friends as they enjoy your outdoor shades and high quality leisure life.From barbecues to poolside hangouts to evening chats around a outdoor dinner,there are so many activities you can enjoy with domi gazebo.
Brand: domi outdoor living
Material: Aluminum
Style: Classic
Item Weight: 328 Pounds
Frame Material: Alloy Steel, Aluminum, Metal, Wood
Water Resistance Level: Waterproof
Shape: Triangular
Ultraviolet Light Protection: 95%
Assembly Required: Yes
Color: wood-looking
Brand Name: domi outdoor living
Manufacturer: domi outdoor living
UPC: 735530621844
Item Weight: 328 Pounds
Floor Area: 168 Square Feet
Required Assembly: Yes
Water Resistance Level: Waterproof
Ultraviolet Light Protection: 95%
Occupancy: 10-15
Style Name: Classic
Shape: Triangular
Color: wood-looking
Material Type: Aluminum
Frame Material: Alloy Steel, Aluminum, Metal, Wood
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Jun 8 – Jun 12
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Brown
Size: 12'×20' double roof
I am writing down my thoughts as I am assembling the 12X20 Domi Gazebo. First let me say that I am a retired auto worker who comes from the trades background. So perhaps I am a little more adept doing my own assembling. My first thought is to suggest anyone who tackles this project should consider having a power drill driver or the like. You will need a 4mm and 6mm hex apex for your drill. Using the tools that were included with the kit will add hours to the assembly process and I would not recommend using these tools for assembly. The prepping of the main beams in the initial steps can easily be done by one person but it is going to take some time to add all the brackets that they supply for the beams and posts. The instructions were not as clear cut as I would have liked and it took me some time to figure it all out. So far considering the country of origin, the quality control seems to be good. All holes have lined up for starting threaded screws (but if I were at the hardware store, I would think about buying a 6mm starter tap just to have on hand in case you encounter a bad thread. There are literally dozens and dozens of these 6mm screws to attach all the brackets and bars required for this assembly. Caution re #2 screws: Different size screws are designated with different numbers beginning with #1 and they are shipped mounted on a plastic blister pack. There are many #1 screws and only 28 #2 screws and they are included with on the pack with the #1 screws. Watch carefully for this as I didn't see the designated #2 and dumped them into the bin with all the #1 screws. So now for where I need the #2 screws, I will need to go out and purchase more screws which are 6mm x 20mm to replace the ones I have inadvertently already used. My one complaint that I have is regarding the supplied screws. I wish that they had been supplied with a little more lead (taper) at the starting end which would have made them much easier for starting in the threaded holes. There are many many screws to run in. So far I have completed everything up to the point where I'm ready to lift the posts and cross beams off the ground and get it all standing up on it's 6 legs. This is where I will need at least two or three other people to help me out here. With my wife & son we were able to lift the side beams to standing position. While my wife balanced each side assembly, my son held the end beam in place while I ran the #2 screws in to connect the assembly at the corners. Two 45Degree supports were added at each corner. At this point I would suggest that the assembler square up the structure by measuring between the posts diagonally (corner to corner). The two measurements should read within a half inch of each other. This will help when you go to install all the roof support brackets and roof panels. My wife and I were able to get the main roof supports up without the help of my son here. Attach the four N1 supports to the K header before lifting. With the help of a 7 foot step ladder, I was able to hold the assembly up in the air while my wife connected the lower ends to the side beams. Once the four N1 roof supports are secured in place, you can easily add the rest of the supports (N, N2 & M) one at a time. I would install the four M corner supports last as they are the longest and heaviest. This is where squaring your structure will pay off for making the anchor holes to line up more consistantly. I have completed the project now. The only major time consuming problem that we encountered was making the plastic tabs stay in place during installation. These were the Z series parts. After they fell off so many times I finally used silicone adhesive to glue them in place. (a very poor design) (An alternative might have been to use simple masking tape to hold the clips in place for installation. Once the roof panel was in, the tape would not be visible) After that the rest of the roof assembly went quickly. I spent about a week working on the assembly but I certainly did not spend 8 hour days at this. (Remember, I'm a retiree) I thought that the quality control on hole placements was excellent. Most all holes lined up or were close enough. Most other reviews mentioned not to tighten roof supports or frame until you have completed the entire roof assembly. I think that that is very good advice as sometimes a little extra movement was needed to line up the holes. The build quality of this gazebo impresses me as does the finish on all the parts. Well engineered for strength and long term durability. Great investment for the house.
...
show more
Reviewed in the United States on July 18, 2023 by Snapshot46
Color: Gray
Size: 12'×18' double roof
I have gotten 3 of these hardtop metal gazebos so far to use on my decks. I keep buying this brand because the quality is excellent and the customer service is worthy of a 6 star rating. One of my gazebos arrived with one of the roof panels missing. I contacted them and they responded within a few hours, they were very responsive and fast to address the missing part. Within a few days the missing roof panel arrived all wrapped up in a thick well protected box. And then they followed up with me after to make sure the part arrived. The instructions to assemble one of these gazebos is clear and the diagrams are easy to follow. Just take your time and study each step and you will not go wrong. One person can assemble most of it but you will need an extra one or 2 people when you are assembling the initial roof structure. You will also need a second pair of hands when you are tightening up the roof bolts on the upper sections. Each gazebo I assembled on my own, each one took me about 2 days. These gazebos are tough, I screw mine down to my decks and they have with stood 50 mph winds with zero issues. I live in an area that gets very windy and very cold in the winter time. I have had a couple of these gazebos for over a year now, they have gone through all the season and all the storms this area likes to throw at us. Each one has stood up completely unbothered by everything the weather has thrown at them. The quality is first class. None of my gazebos leak, they keep the outdoor furniture dry and looking good. Each gazebo comes with a set of fly screens and full sun block out curtains that roll around the sides on built in rails. They are very well made, the zippers are heavy duty, all the curtains are beautiful quality. They work in the hot sun or when it is 20 below zero without issue. So far I have purchased a 14x22ft, a 10x14ft and a 12x18ft. I placed the 14x22 and the 10x14 right next to each other, which you can see in the attached photos. Sitting right next to each other they look like they are all part of the same structure. These are the nicest quality hardtop metal gazebos I have ever had, the fact I have bought 3 so far and plan to buy a few more of them says volumes about the quality. I would give these metal hardtop gazebos a 6 star rating, they are that good.
...
show more
Reviewed in the United States on January 20, 2026 by CJ Chen