Search  for anything...
WEN

WEN Cross Vise, 4.25-Inch with Compound Slide for Mills and Drill Presses (CV414),Black

  • Based on 1,389 reviews
Condition: New
Checking for the best price...
$90.42 Why this price?
Holiday Deal · 5% off was $94.99

Buy Now, Pay Later

As low as $15.07 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product
This item's return window has been extended for the holiday season: FREE refund/replacement until Jan 31, 2026

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, Dec 9
Order within 5 hours and 8 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Pattern Name: Cross Vise


Style: 4-Inch Cross Vise


Features

  • 4.25 by 1.25 in. jaws open up to 4.125 in. wide
  • Constructed of industrial-strength powder-coated cast iron
  • Hand wheels feature machine-marked 0.1 mm increments for maximum precision
  • Jaws travel 5.8 in. left and right and 6 in. front and back
  • Universal design compatible with the majority of drill presses on the market (see images for base dimensions)

Description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4.25-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25 by 1.25 jaws open up to 4.125 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With five 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is compatible with the majority of drill press tables on the market. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Material: Cast Iron


Brand: WEN


Color: Black


Style: 4-Inch Cross Vise


Item Weight: 8.99 Kilograms


Tensile Strength: 1900 Pounds


UPC:


Global Trade Identification Number: 01


Manufacturer: WEN


Material: ‎Cast Iron


Brand: ‎WEN


Color: ‎Black


Style: ‎4-Inch Cross Vise


Item Weight: ‎8.99 Kilograms


Tensile Strength: ‎1900 Pounds


UPC: ‎044459414001


Global Trade Identification Number: ‎01


Manufacturer: ‎WEN


Part Number: ‎CV414


Item Weight: ‎19.78 pounds


Package Dimensions: ‎11.27 x 10.8 x 7.64 inches


Item model number: ‎CV414


Pattern: ‎Cross Vise


Power Source: ‎Hand Powered


Item Package Quantity: ‎1


Measurement System: ‎Inch


Included Components: ‎4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise


Batteries Required?: ‎No


Date First Available: January 10, 2022


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Dec 9

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Cheap but Good
Pattern Name: Cross Vise Style: 4-Inch Cross Vise
Review Image by Peter dragon Peter dragon
Review Image by Peter dragon Peter dragon
Review Image by Peter dragon Peter dragon
I got my Wen 4.25 cross slide vise this morning. I don’t know how Amazon can deliver it overnight for free? Box was in perfect condition and I knew I was off to a good start. I unboxed it and started playing with it. It comes with the slides locked and handles off. I assembled it and adjusted it and I was pretty excited about how nice it looked and functioned. I disassembled it and cleaned it up and used valve lapping compound on all the contact surfaces. Lubed it up and reassembled. It works really great for an 80.00 vise. I read reviews about the quality and I think it’s great for the price. You can probably get a 700.00 to 1,000 dollar vise that is near perfect. Everyone would still buy this vise because they don’t want to spend the money on a high quality piece, myself included. I did buy 4 new set screws and nuts to replace the set screws that doesn’t have nuts. It made a big difference because I had screws back off when I was playing with it. I have yet to mount it or clamp anything in it but I don’t see any problems with it. The casting was smooth and looks good also. I wanted a Wilton 5” for my JET IDP22 but I couldn’t get any Dimensions on the base to see if it would work with my table slot locations. It looks small on my drill press… if you are willing to spend some time on it, you will have a good tool… ... show more
Reviewed in the United States on October 14, 2023 by Peter dragon Peter dragon
    • Pretty good for the price.
Pattern Name: Cross Vise Style: 3-Inch Cross Vise
I thoroughly researched this particular vise before purchasing it, so I knew what I was getting. As others have stated, it's a perfectly functional device once you disassemble it and polish and lubricate the surfaces. For my needs it should work perfectly fine, if you need something with precision accuracy look elsewhere. I only rate it four stars instead of five due to the fact that unless you're willing to put a little bit of elbow grease into it you probably won't be satisfied. That said, for the price and a little effort it's a better vise than others that I've seen for higher prices. ... show more
Reviewed in the United States on September 26, 2025 by Tom G
    • Good tool... after a simple rework!
Pattern Name: Cross Vise Style: 3-Inch Cross Vise
Exactly as stated by several people who bought it. I spent a few hours after disassembling it (watching carefully, for reassembly). I cleaned off all the factory oil film. I polished all the friction areas using 600 grit sandpaper. This removed some small roughness and burrs. After thoroughly cleaning the threads of the worm screws (Longitudinal Feed, Cross Feed and Leadscrew) I observed if there were any imperfections. I don't know if I was lucky, the CV413 unit I received came with very well-defined threads. After all the above process, I lubricated the rails, bearings, worm screws, and even the handles, all with a layer of WD-40 Specialist White Lithium Grease Spray. I reassembled the vise, readjusted the screws that define the longitudinal and transverse displacement pressure and the result was excellent and surprising, showing that the WEN is a good quality tool, needing only a little rework after leaving the box. Smooth movements without play, except in the crank handles when reversing the direction of movement. Yes, that was the only downside... It is a small deficiency mentioned by others, however, it does not compromise the tool in my humble opinion. Anyway, great cost-benefit! With this procedure, I would recommend its purchase without any hesitation. ... show more
Reviewed in the United States on January 14, 2025 by Walter
    • Great value in a drill press vise
I bought this vise to mount to my benchtop drill press so that I could do some milling in addition to drilling. I had not previously purchased any Wen brand products. I found the quality level of this vise to be better than I expected for the price. I think a lot of the people who buy these things need to temper their expectations a little. For under $60 you're not going to get a production-grade piece that's accurate to a thousandth of an inch. What you do get is a decent quality vise that can position your work with reasonable precision. I found that drill press vises tend to fall in to 4 categories: 1) poorly machined cheap junk; 2) better quality at a reasonable price (this product fits here); 3) the same quality but with a different name brand at twice the price; and 4) high precision manufacture for hundreds of dollars. My vise arrived in perfect shape. It was easy to assemble. With a little lubrication and some fine tuning to the tension adjustment screws I quickly had it set up to my preferences. The only problem was... my drill press was too small to mount it! Long story short, after a bit of research I actually ended up buying a new drill press from Wen also. I got the Wen 4212 benchtop drill press and I couldn't be happier. That's a separate review, but suffice to say that nothing near that price point came even close to the features or quality and I'm very satisfied. ... show more
Reviewed in the United States on December 29, 2018 by Amazon Customer
    • Not the best in the world but...
Pattern Name: Cross Vise Style: 4-Inch Cross Vise
I bought the WEN drillpress and works flawlessly! So I figured why not buy the WEN 4" crossslide vise. CONS: It took a little sanding and lube to get it to work rightish. I had issues with backlash so I tightened the set screws down some vibrated out. Two broke in half I probably over torqued them. Over the weekend I needed to shape some 1/4 inch metal and broke the guide🤦♂️in 2 pieces. If you plan on using this as a cheap man's milling table/vise it will need more work to it than it comes. Doesn't handle vibration well out of the box. It also probably doesn't help when a money that doesn't know anything gets to play with tools (myself😅). Pros: It'll need a little work out of the box either way but, for small projects where your accuracy doesn't need to be 100% precise it's a great option to start out with. Good for wood and plastics. Not bad for drilling as long as it's not abused😅. Note: Hobbies aren't fun unless you spend money and break stuff in your shop and figure out how make it better. Don't tell the Wife 😬. ... show more
Reviewed in the United States on February 16, 2023 by lucas phillips

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...