Search  for anything...
Tangkula

Tangkula 42 Inches Recessed Electric Fireplace, in-Wall & Wall Mounted Electric Heater with Adjustable Flame Color & Speed, Remote Control, Touch Screen, 750-1500W (42 Inches)

    • Based on 1,646 reviews
Condition: New
Checking for product changes
$259.99 Why this price?
Save $20.00 was $279.99

Buy Now, Pay Later

As low as $43.33 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Monday, May 27
Order within 9 hours and 34 minutes
Available payment plans shown during checkout

Recently Viewed

Size: 42 Inches


Features

  • More Engaging & Practical: The thickness of the upgraded electric fireplace is reduced to 3.86 inch and wont be obtrusive on the wall. And the location of switch is changed for convenient operating. In front of electric fireplace, we add two air inlets to ensure fast incoming air.
  • 2 Heat Settings & Realistic Flame Effects: 2 modes of heating (750w & 1500w) can be adjusted for both warm and energy saving purpose. The supplemental zone heating is up to 400 square feet. Comes with 12 flame colors and 12 bed colors, you can choose them freely. Equipped with lots of crystal glass, realistic flame will give you better visual experience.
  • Multi Operating Modes: 5 flame speed modes and 5 flame brightness levels can be chose by yourself. 1 hour to 8 hours timer control and sleep mode with all lights down while heating will create a comfortable environment with automatic design(the flame color and brightness changed automatically).
  • Safe to Use with Different Ways: It is convenient to operate the electric fireplace both manually as well as by remote control. And the heater has gained certification from ETL and is equipped with safety cut-off device for overheat protection. The infrared heat will maintain the natural humidity in the air without making the room too dry.
  • Various Installation Modes: Inserting the electric fireplace into wall or hanging on the wall are convenient ways to enjoy comfort of fireplace without taking up too much space. This embedded fireplace will add a touch of sleek and elite into your living room, bedroom and office.

Brand: Tangkula


Product Dimensions: 3.86"D x 60"W x 18.11"H


Material: Tempered Glass, Metal


Finish Type: Powder Coated


Installation Type: Wall Mount


Heat Output: 5100 British Thermal Units


Style: Classic


Color: Black


Ventilation Type: Vent Free


Heating Coverage: 400 square feet


Item Weight: 36 Pounds


Product Dimensions: 3.86 x 60 x 18.11 inches


Item Weight: 36 pounds


Manufacturer: Tangkula


Date First Available: June 4, 2020


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, May 27

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Nice addition to the living room. Not much heat. Got a noisy one though.
Size: 36 Inches
Review Image by Ben Wagner Ben Wagner
Review Image by Ben Wagner Ben Wagner
Review Image by Ben Wagner Ben Wagner
Review Image by Ben Wagner Ben Wagner
Review Image by Ben Wagner Ben Wagner
Bought it for my wife for Christmas. It was for the ambiance not the heat. As a heater, it did work, but doesn't put out a ton of heat. Think smaller room here. It's not going to heat a larger room (or one with high ceilings). I had no issues with the remote (obviously, remove the plastic tab that keeps the battery disconnected during shipping). The color configuration is easy via the remote. But it's sure easy to accidentally change the color, then you have to tap through all the colors to get back to the one you wanted. Overall, the "flames" look pretty nice. My wife had no issue with the "crystals" - similar to the glass chunks you'd see on many of the gas fireplaces. The only issues I had is that the LEDs on the front panel didn't work (the touch still worked), but the remote did just fine. My wife actually prefers the lights being out. Also, after a day's usage, it started "ticking", making a constant click that spend up when you spend up the "flames" or slowed down if you slowed them down. Overall, nice addition to our living room to help make it "cozy". Installation was straightforward. I did a on-wall mount for the time being until I have time to cut out and frame the wall for the in-wall mount. Remove the screw on the left side of the glass that holds the glass on. Mine was marked with a small sticker that had an arrow on it. There are hooks on both sides of the glass, so if you want to swing it out (on-wall mount) or lift it out completely (in-wall mount), gently lift the glass and either swing it out, leaving the right hooks still engaged and lower it or it'll lift out completely. If you are removing the glass assembly, clip the cable tie that holds the cable to the front panel and detach the cable. In lieu of sending it back (now that it was mounted), I decided to investigate what was causing the noise. The 12V 28BYJ-48 stepper motor that drives the "flames" bar had some internal gear noise that was amplified by the metal case. This is a fairly easy replacement, but will require a bit of patience. If you're interested, read on... 1. Unplug the unit and completely remove the front glass assembly. 2. Remove the 4 screws at the top of the plastic screen and the 2 screws at the bottom of the plastic screen. The lower metal tray has 4 screws holding it in. Two on each side of the tray. (see pic 1 & 2). 3. Carefully remove the metal tray. The plastic screen is mounted in a slot in the metal tray, so you'll need to wiggle the tray down to free the screen. Disconnect the wire assembly to the LED bars. Set that aside. 4. With the tray removed, you can gently pull down on the plastic screen to remove it from the upper track. There are tracks on the side as well, so once I got the screen down far enough, I flexed it to get it out of the side tracks. (One quick note about the screen - it's just a piece of smoke colored plastic with a film on the back. It's not really fragile, but it's easy to scuff. Plastic (plexi/acrylic) polish will fix that if it's an issue for you). 5. With the screen removed, loosen the hose clamp closest to the motor and slip it to the left to remove. (pic #3) 6. Locate the stepper motor (pic #4). Follow the motor's wires up to the control board. Disconnect from the control board. 7. This is the tedious part. Remove the two screws that hold the motor on. I used a close quarter mini bit ratchet with a #2 phillips bit (ARES 70040-1/4-Inch Drive Close Quarter Micro Bit Ratchet) to remove the screws. I did try an angled head screwdriver and an offset screwdriver, but I found the micro ratchet worked the best for me. 8. I replaced the motor with another 12V 28BYJ-48 stepper motor with a 22cm+ wire. (the 12V part and the wire length is important) - this should be 5 wire 4 phase. I tested the new stepper motor before reinstalling to make sure it worked correctly. I would rest the side of the motor on the metal frame to see simulate much noise it actually makes when in operation installed. 9, Reinstalling: I actually put thin rubber spacers in as a vibration dampener when I reinstalled the new stepper motor. Not sure if that actually helped much, but worth a shot when I had it apart. Make sure they are thin since the shaft (on mine) was so short. Also - the wires from the motor need to be at least 20-22cm. I got one with a 24cm wires, so plenty long. Replace the two screws holding the motor to the frame, route the wire back up to the control board and plug it back in. 9. Because the shaft on the new stepper motor (pic #5) that I purchased was so much shorter than the original, I purchased a metal 5mm to 5mm flexible coupling because the rubber tube with hose clamps set up kept falling off. Attach one side of the coupling to the installed stepper motor and insert the flame assembly in the other side and tighten the set screws. Check it in operation to make sure it rotates correctly. 10. After checking, reassemble. Insert the plastic panel into the side slots, then slide the plastic panel back into the upper slot. Hook up the wires to the LED bars and reinstall the bottom tray. Install all the screws, hook up the front panel controls and install the glass assembly. I don't think this was a common issue based on the reviews, but in lieu of shipping it back and getting another, and the fact that this one was installed, it was worth investigating. If yours is out of warranty or outside the return window, hopefully this helps. Replacing the stepper motor/coupler may fix the noise issue (noise with the heater off) or flames not moving anymore. It works great now and if you don't have any of the issues that I had, it was a worthwhile purchase for us. Even with the issues I experienced, it was an interesting project to fix. As far as the front panel LEDs not working, it doesn't matter to me, so I didn't bother investigating further than checking connections. (As a side note, you can access the control board from the back by removing the smaller panel on the back of the unit. ... show more
Reviewed in the United States 🇺🇸 on January 4, 2022 by Ben Wagner Ben Wagner
    • Missing Parts
Size: 36 Inches
The unit is nice. The heat output could be stronger and the remote control should have a longer range as you have to be close to the unit to use it. The crystals were missing from mine. I contacted the company who initially responded right away requesting information. I sent it but haven’t heard back. I do not see a way to contact the seller on here. Right now I’m not satisfied with my purchase. Will update if someone reaches out to me about the missing pieces or return the heater. Whichever comes first. ... show more
Reviewed in the United States 🇺🇸 on January 17, 2023 by Laurie
    • Easy to install
Size: 50 Inches
Review Image by John Reznicek John Reznicek
Love the colors, heats good, looks great
Reviewed in the United States 🇺🇸 on December 28, 2022 by John Reznicek John Reznicek
    • Wife is in love with this fireplace
Size: 42 Inches
Review Image by william william
My wife has been asking for a fireplace for our room for a couple of months, so I wound up looking at a ton of reviews and decided to go forward and roll the dice with this unit. Absolutely love it! Easy to install, directions are ok, and it looks great. The dimensions for the install were spot on so building the wall unit was a snap. Overall expense for the unit and the build out was roughly $500 all in. Highly recommend this fireplace ... show more
Reviewed in the United States 🇺🇸 on November 2, 2022 by william william
    • Good supplemental heater
Size: 36 Inches
Review Image by larry larry
I had an old fireplace that wasn't providing anything as far as looks or heat goes, so I decided to replace it with this. Once I received the unit (which arrived well packaged and quickly) I took measurements and created an insert in the fireplace opening to hang the unit. This unit is intended to be hung on a wall (or inserted into a wall) much like a TV. I only had slightly less than 5 inches of depth to mount this unit in my opening which is why I chose this particular unit since it is less than 4 inches deep. There are two options to hang the unit - a cleat or directly to a stud using screws through holes already in the rear of the unit. Before installing this unit I would recommend reading the installation instructions in their entirety first (everything you need to know is in them). After installing the unit and putting in the beads and replacing the front glass simply plug it in and play around with the color patterns to find what you enjoy. The remote is functional but seems to work best when held level and aimed directly at the panel. The control buttons located on the unit also control all functions. This unit is not a quartz heater it is electric and the vent in the top middle is where the heater is located. I don't believe it would heat a large family room on its own but is decent at providing supplemental heat. The heat has three settings - off, low and high and is fan forced when on. You can also run the lights without having the heater on. I have been using this heater for over a month now and it is providing me with what I expected. Overall it is a good supplemental heater for a large room that looks much better than the old black hole I had previously. ... show more
Reviewed in the United States 🇺🇸 on January 4, 2021 by larry larry
    • Looks great, nice features, missing thermostat but timer a option
Size: 30 Inches
I opted to use it to replace a baseboard in a upstairs bathroom. Creates a great ascetic look and having a remote is handy. For the $ though I would have liked a way to set a temp so its not just on endlessly. Most the time It will probably get used for family members showering, but I wish there was a easier way to ensure it gets shut off via wifi/app or some other control like a thermostat. I assumed it had a temp control but the digital display is mainly for 2 digit digital representations of colors. General negatives: little noisy, and no temp control. Improvements: way to lock it into 750w mode, thermostat, or enforced timer. ... show more
Reviewed in the United States 🇺🇸 on April 5, 2022 by M. Statkus
    • It’s kind of noisy
Size: 42 Inches
Looks great I really like this fireplace. I don’t use the heat setting and even with just the lights it’s kind of noisy which I find odd. Nothing I won’t be able to get used to but I wish it were silent.
Reviewed in the United States 🇺🇸 on June 25, 2022 by Nathan rebello

Can't find a product?

Find it on Amazon first, then paste the link below.