Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)
Condition: New
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 6 left in stock, order soon!
Arrives
Wednesday, Feb 11
Color: Grey 1kg
Features
- Fast Printing and Curing: Siraya Tech ABS-Like resin has good fluidity, which can effectively increase printing speed, success rate and are easy to clean. And this 3D printing resin has an excellent combination of stiffness and toughness, is not fragile, and is strong enough to take that accidental fall from time to time.
- Low Odor and Easy to Clean: Siraya Tech fast ABS-Like resin produces little order in the 3D printing process and is not unpleasant. And Siraya Tech fast resin is very easy to clean. After you print, you only need an air gun and alcohol spray to rinse it off, avoiding sticky after printing the model.
- Wide Applications: Siraya Tech standard 3D printer resin is highly compatible with most LCD and DLP 3D printers and 8K capable. This fast ABS-Like resin has a wide range of applications, from tabletop models to industrial parts, especially suitable for small and half-length models.
- Great Resolution and Surface Finish: Siraya Tech ABS-like resin have great color, and the printed model has high resolution and smooth surface. This makes your models look great while reducing the time needed in postprocessing.
- High Precision and Low Shrinkage: Siraya Tech 3D printing resin is the choice of many professional model lovers. This UV resin has volume shrinkage during the curing process, brings a smooth surface and high resolution to the printed model, and is an excellent choice for 3D precision printing.
Brand: Siraya Tech
Material: Resin
Color: Grey 1kg
Item Weight: 1 Kilograms
Item Diameter: 10 Centimeters
Product Dimensions: 5.12 x 5.94 x 8.46 inches
Item Weight: 2.2 pounds
Manufacturer: Siraya Tech
Is Discontinued By Manufacturer: No
Date First Available: July 19, 2019
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Feb 11
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Grey 1kg
I'm in the middle of an engineering project (basically a custom RC plane), and needed some small, precise parts that still need to take decently significant loads. Of course print quality and resolution is a more a matter of what printer you have, but I can say this stuff printed fantastically on my Photon Mono S with the settings recommended by Siraya Tech (you can find a spreadsheet on their website). The parts that I got are incredibly strong. I know this is an ABS-like filament, but I've legitimately gotten better performance out of these than actual ABS from an FDM printer. That is most likely because printing orientation does not matter nearly as much, so the parts turn out mostly isotropic (equal strength in all directions). I'll describe some of the cases I used this for below. MY USE CASES: One of the parts was a stepper motor gear (28BYJ-48) that needed to deal with up to 0.1N*m of torque. I can tell after a lot of use, the section that meshes with the stepper pin has worn down from perfectly tight, to having maybe 3-5 degrees of slack, but it's still perfectly usable. Many of the parts require linkages between them, so I printed 5mm pins. In my case, I had to reduce the size of the pins to about 95% to avoid clearance issues, but once they were in place the pins had very little friction while still providing very tight joints. Additionally, those pins could handle a surprising amount of shear force. I tested with a 5kg weight, so statically that's about 2.5MPa, but I also drop tested with that rig, so it could have easily reached 25MPa at one point. CLEANING: Specifically regarding this resin, you have to empty and clean your vat within 2 days if you don't plan on printing again. This stuff will separate into layers in about that time and becomes harder to clean off the vat. Also, water curing has yielded good results for me. If you've never resin printed before this part is for you, otherwise move along: Cleaning the prints is quite a hassle. They come out coated in liquid uncured resin which is, in the case of this resin, definitely a nasty skin irritant and potentially toxic if ingested (most resins are). You'll need LOTS of isopropyl or denatured alcohol, at least like 2 or 3 tubs or large tupperware containers, lots of paper towels, definitely more gloves than your printer comes with, and some way to get rid of the fumes. The alcohol is smelly enough, but this resin is definitely nasty stuff to be around. You have to be very careful not to get it on your skin or other surfaces (as it is quite drippy off the printer). With this resin, I got the best results by cleaning with alcohol from a spray bottle, then rinsing in water for 30 seconds, and then submerging in a cleaner tub of water before leaving in the sun (for 45 minutes) or shining with a bright UV light (1 minute or more, flipping the part with tweezers). I tend to keep one tupperware container for the alcohol cleaning process, which is very thick with uncured resin, one container for dirty rinse water, and one for clean water (and a bonus extra container to place all my contaminated tools and paper towels). I can usually run with this setup for several prints without changing out the liquids, which is nice because you CANNOT wash this stuff down the drain (unless you want even more micro-plastics in the ocean), and it absolutely has to be cured before you dispose of it. I typically save my 2-liter bottles and old mouthwash bottles, dump everything into those, and leave them out in the sun for a day before putting in the trash. CONCLUSION: If you can deal with the hassle of cleaning and PROPERLY discarding of the waste, then this resin produces results that you simply cannot get with other printing methods. Sure, FDM printing is less toxic and usually easier to get larger prints with, but the precision and speed of resin printing is unmatched. Usually that comes at the cost of poor physical proteries, but with this resin, you can get really small, precise parts with fantastic physical properties.
...
show more
Reviewed in the United States on April 6, 2022 by Stephen Haas
Color: Grey 1kg
Quite literally the best resin I've used for printing miniatures. High detail, keeps a good form, doesn't change color too much after curing, and grinds well for bonding parts. It's solid grey, there is no color variation and it is very dense. It is however, very brittle and even the slightest drops can, and will, snap pieces off of the print.
...
show more
Reviewed in the United States on January 8, 2026 by Triston
Color: Grey 2kg
Fantastic reliable, high-quality resin with great detail, never any printing issues now that I have my printer dialled in and the temperature set
Reviewed in the United States on November 18, 2025 by ColdWind
Color: Smoky Black 1kg
Siraya Tech Fast Smokey Black resin has become a reliable and dependable choice for many users, thanks to its impressive array of features. Known for its durability and flexibility, this product offers clean and smooth results for a wide range of 3D printing applications. In addition, users appreciate the minimal odor, making it an excellent option for those with heightened sensitivity to strong smells. The resin's robustness, combined with its slight flexibility, allows users to create intricate and complex designs without the fear of breakage. This makes it an ideal choice for both hobbyists and professionals alike. Furthermore, the Fast Smokey Black resin boasts a consistent performance, ensuring that users can expect the same level of quality from batch to batch. In conclusion, Siraya Tech Fast Smokey Black resin has proven itself to be a top contender in the 3D printing market. Its durability, flexibility, and minimal odor set it apart from other products in the field. As a result, it remains a go-to option for many satisfied customers who are looking for consistent quality and excellent results in their 3D printing endeavors.
...
show more
Reviewed in the United States on May 10, 2023 by Runic 3D Printing Runic 3D Printing
Color: Tough Navy Grey 1kg
This resin works great, gives great detail and holds up really well in the tough department. My only negative would be the price, it is a premium product and the price reflects that; though there are cheaper options (few) that will give you similar or better results.
Reviewed in the United States on October 22, 2025 by Michael Riccitelli Jr.
Color: Smoky Black 1kg
This resin is absolutely superb. I undertook a challenging 3D print job that consisted of very large pieces that needed precision to with interlocking gasket faces to be assembled. I tried several resins, but I was encountering multiple issues that resulted in print failures: separation from supports, drooping and distortion from the build plate, warping and bowing of the sides, and pitting from shrinkage. Basically nothing was turning out properly to my liking, and to get it even close required laying out a dense forest of supports just to get each print to hold on. And the stuff was soft and scratched easily even after curing. I switched to the Siraya Tech smoky black and the results are like night and day. I've had virtually zero warping and distortion, and parts are fitting together with precision that exceeded my wildest expectations. I've had zero print failures, and even am using significantly lower density of supports, which both saves on resin, and post print cleanup. In terms of cleanup, the resin sands, files, and polishes nicely, and the translucent color helps a bit with dry fitting prints. I'd recommend wet sanding in order to keep down on dust. After curing, the resin is sturdy and decently scratch-resistant. It feels something similar to Lego plastic. Surface takes primer and paint well. Printing on a Saturn 2, exposure calibration was a breeze (2.5 seconds). Additionally with the plug-in air filter, and odor is minimal.
...
show more
Reviewed in the United States on August 11, 2022 by Aaron