2.85mm High Flow TPU Filament 3mm White, Shore 95A Flexible Filament 2.85mm 1kg Spool - Polymaker PolyFlex TPU95-HF TPU Filament 3mm Soft Filament, Print with 2.85mm Openning 3D Printers Only
Condition: New
Buy Now, Pay Later
As low as
$11
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Thursday, Jul 31
Recently Viewed
Color: 2.85mm, 1kg High Flow Tpu95, White
Features
- Print Fast & UV Resistant TPU Filament - PolyFlex TPU95-HF is a white flexible filament high flow TPU 2.85 ( high speed TPU filament ) with a shore hardness of 95A and boasts a large strain-to-failure test result with over 400%. Thanks to its high flow ability, it prints incredibly fast. It's also UV resistant which can be used outdoors
- Tangle Free & Moisture Free - Polymaker White TPU soft filament is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Flexible & Strong & Consistent & Outstanding Layer Adhesion - Super easy to print with. Great flexibility and shape memory. Polymaker 3D filament TPU is strong yet flexible, which has tough rubbery consistency and outstanding layer adhesion, also Bubble-free, Jam Free & Warp Free, easily get really perfect prints with proper settings
- Wide Applications - PolyFlex TPU filament 2.85mm ( white flexible filament 2.85 )has wide applications including seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications, such as shoe insoles, watch bands, phone cases, drone parts and more)
- PolyFlex TPU95-HF Printing Settings - Nozzle: 200 C - 220 C; Bed: 25 C - 50 C; Speed: 40mm/s - 100mm/s; Fan: On. Selected Diameter: 3D Printer filament flexible White TPU 2.85mm ( Elastic filament White TPU Roll )
- Note - PolyFlex TPU Flexible filament 2.85mm should be printed at lower speed than normal. It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. Turn off (or limit) retraction if possible. Turn up the bed temp to 80C or so for the first layers to get good adhesion
Brand: Polymaker
Material: Thermoplastic Polyurethane
Color: 2.85mm, 1kg High Flow Tpu95, White
Item Weight: 1 Kilograms
Item Diameter: 2.85 Millimeters
Manufacturer: Polymaker
Brand: Polymaker
Item Weight: 2.2 pounds
Package Dimensions: 9.45 x 8.46 x 3.11 inches
Color: 2.85mm, 1kg High Flow Tpu95, White
Material Type: Thermoplastic Polyurethane
Number of Items: 1
Size: 2.85mm
Manufacturer Part Number: PM70298
Date First Available: November 8, 2020
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Thursday, Jul 31
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 2.85mm 0.75kg Tpu95, Blue
I've already printed full a roll of the Polymaker "Clear" TPU95A, and so had my printer pretty much dialed in. Switching to this blue, I found that it's very stringy, and bed adhesion is super strong on just a plain glass heated bed, even tiny parts stick like crazy without any glue. I compared a 1mm thick - 3" disc made out of clear vs a 3mm thick disc of the same size in the blue... the flexibility factor is still noticeably more squishy in the blue filament. I originally purchased to make something in vase mode, but it was a total fail since it's just too flexible during the print, but discovered quickly it's a superb material for making gaskets!! All-in-all, it's a great filament to have in my toolbox!
...
show more
Reviewed in the United States on December 22, 2022 by Myke
As a generalization, TPU has a reputation for being a bit more difficult to print. I was expecting to have to do a lot of work to get a clean print out of this. To my surprise... I really didn't have any issues. My first test prints were coming out clean. I did print a temperature tower to find the best temp for this and tweak settings to minimize stringing (TPU is usually fairly stringy). Then straight away I was getting good parts with this stuff. The material is very flexible. It's not particularly 'stretchy'. The filament itself does exhibit stretchy/elastic property (in addition to flexibility) but once you have a handful of layers built up, it really doesn't 'stretch' and is mostly just flexible. It is VERY strong and layer adhesion is outstanding (you will find that you cannot pull the layers apart.) I should mention that I use this on a direct-drive printer. Bowden-drive printers are probably more common. Bowden drives have to "push" the filament through the Bowden tube and the rubbery nature of the filament can make this difficult for some printers. Direct-drive printers have the filament feed hob gear directly on the print head (no Bowden-tube) so they have better control of the filament. I've never tried to print this on a Bowden-drive machine so I can't speak to how well it works.
...
show more
Reviewed in the United States on December 13, 2019 by T. Campbell
Color: 2.85mm 0.75kg Tpu95, Red
whether mounted internally on a polycarbonate spool holder in my printer or externally in a spool dryer with very low friction bearing rails, the resistance produced by the cardboard on these reels coupled with the elasticity of the filament makes the product feed and print abysmally. wish i could be credited for the roll i began printing on. returning all the others i purchased. plastic reels would very likely not produce this problem as it is a non-issue with airwolf and ninjaflex TPU (spooled on plastic reels).
...
show more
Reviewed in the United States on February 17, 2023 by visitor
Polyflex was a joy from the very start. I took a guess at the print settings, and my first print turned out perfectly. I made some small adjustments, and then printed 20 hours worth of parts with only a single failure. My nozzle did clog at one point, but I believe the was some old ABS in there. After a few cold pulls, printing continued without error. Every part stuck to the bed. The were no voids, and NEVER any layer separation. I can hardly believe how good the layer adhesion is in this stuff. I pulled with all my might and the lays did not separate. PLA and ABS gave way almost immediately. It feels slightly greasy, but that's just the low friction surface finish. I did find the color a little darker than shown, but consistent. I wish they would make a wider range of colors in this material.
...
show more
Reviewed in the United States on April 28, 2016 by Hippo
They say it works in most printers, but when talking to support on the phone they had not hear of the Robo 3D printer and did not know if it would work.
Reviewed in the United States on March 19, 2017 by BullMarket
Bought this to print replacement rubber end caps for a toolbox I was restoring. Printed beautifully on the first try, with a bowden setup and standard (non-flex-capable) extruder, with print settings in the middle of the recommended range. The one thing I would recommend (just like with other flex filaments), especially if your are extruding into a bowden tube: tweak your settings so that you're extruding at a constant rate (so infill, perimeters, and everything else at the same rate), disable retraction, and print reasonably slow (I went about half as fast as I print PLA); those things should prevent most problems.
...
show more
Reviewed in the United States on March 30, 2021 by Garrett Garrett
Awesome material! I have printed so many things with this material from phone cases, gaskets, spacers, watch band, etc
Reviewed in the United States on June 21, 2017 by Amazon Customer